0 item

Life Fitness Integrity Series Treadmill CLST Operations Manual

Public Channel / Manuals

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

3. T ABLE OF C ONTENTS Section Description 1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 1.1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 1.2 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2. Console Overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 2.1 Console Overlay Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 2.2 Console Overlay Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 2.3 Reading Rack and Accessory Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 3. Heart Rate Zone Training ® Exercise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3.1 Why Heart Rate Zone Training ® Exercise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3.2 Heart Rate Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 4. The Workouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 4.1 Workout Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 4.2 Using the Workouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 4.3 Workout Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 4.4 Maximizing Workouts on a Life Fitness Treadmill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 4.5 Logging On to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 5. Service Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 5.1 Entering and Using the Service Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 5.2 Manager’s Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 6. Service and Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 6.1 Preventive Maintenance Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 6.2 Preventive Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 6.3 Troubleshooting the Treadmill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 6.4 Troubleshooting the Optional Polar ® Telemetry Heart Rate Chest Strap . . . . . . . . . . . . . . . . . . . .41 6.5 Troubleshooting the iPod ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 6.6 How to Adjust and Tension the Striding Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 6.7 Proactive Belt Wear Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 6.8 How to Obtain Product Service / Serial Number Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 7. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 7.1 CLST Treadmill Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 7.2 CLST Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 © 2010 Life Fitness, a division of Brunswick Corporation. All Rights Reserved 2

1. INTEGRITY SERIES TREADMILL (CLST) OPERATION MANUAL 07/24/10 M051-00K58-B380

39. 6.3 T ROUBLESHOOTING THE T READMILL Malfunction Probable Cause Corrective Action No power. ON / OFF switch is not in proper position. Turn the switch to the ON position. Power source is insufficient. Plug treadmill into a dedicated 20 amp circuit. Using a voltmeter, verify power at outlet. If no power exists, reset circuit breaker at panel. Line cord is damaged. Replace line cord. Contact Life Fitness Customer Support Services. Line cord is improperly seated in socket. Inspect power connection at wall outlet and at machine for proper contact. Circuit breaker is tripped. Verify that circuit breaker is not open. If open, reset circuit breaker. The location of the circuit breaker is on the outside of the treadmill, next to the ON/OFF switch. The breaker is a circular disk with a white button. The white button will have popped out. Press the white button at it’s center to reset the circuit breaker. 38

7. • When it is necessary to immobilize the treadmill, set the display to read SELECT WORKOUT. (Press the STOP key twice if not already there.) Then hold down the SPEED DOWN key and press the PAUSE key. The treadmill now displays “IMMOBILIZED”. In this state, the treadmill cannot be operated. The belt and incline motors are disabled. The treadmill will remain in this state across resets, power cycles, etc. To restore normal operation, repeat the same key sequence; hold down the SPEED DOWN key, and press the PAUSE key. The treadmill will display “SELECT WORKOUT” again. • Use this appliance only for its intended use as described in this manual. Do not use attachments that have not been recommended by the manufacturer. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 6

9. • Les rampes latérales peuvent servir à rétablir son équilibre, mais ne sont pas destinées à un usage continu. • Ne jamais monter sur le tapis de course et ne pas en descendre jamais pendant qu'il tourne. Utiliser les rampes latérales afin de ne pas perdre l'équilibre. En cas d'urgence, par exemple, en cas de trébuchement ou de faux pas, saisir les barres latérales et placer les pieds sur les plates-formes latérales. • Ne jamais marcher ni courir à reculons sur le tapis roulant. • S'il est nécessaire d'immobiliser le tapis roulant, régler l'afficheur sur SELECT WORKOUT (SÉLECTIONNER EXER- CICE). (Appuyer deux fois sur la touche REMISE À ZÉRO si l'afficheur n'en est pas déjà à ce point.) Maintenir ensuite la touche SPEED DOWN (RALENTISSEMENT) enfoncée et appuyer sur la touche PAUSE. L'appareil affiche désor- mais IMMOBILIZED (Immobilisé). Il ne peut alors plus fonctionner, Le moteur principal, le moteur en ligne et le cireur sont désactivés. Le tapis roulant restera immobilisé, même s'il est réinitialisé, mis hors tension, puis remis sous ten- sion, etc. Le mode de fonctionnement normal ne peut être rétabli qu'au moyen de la même séquence de touches : maintenir la touche SPEED DOWN (RALENTISSEMENT) enfoncée et appuyer sur PAUSE. L'appareil affichera SE- LECT WORKOUT (SÉLECTIONNER EXERCICE) à nouveau. • Cet appareil ne doit être employé que pour l'usage auquel il est destiné, conformément aux directives du manuel. Ne pas utiliser d'accessoires qui ne sont pas recommandés par le fabricant. CONSERVER CES INSTRUCTIONS POUR TOUT USAGE ULTÉRIEUR. 8

42. 6.4 T ROUBLESHOOTING THE O PTIONAL P OLAR ® T ELEMETRY H EART R ATE C HEST S TRAP Malfunction Probable Cause Corrective Action Heart rate reading is initially detected and functioning normally but then is lost. Use of personal electronic devices, such as cell phones and portable MP3 players, causes external noise interference. Remove the source of noise or reposition the exercise equipment. Equipment is in close proximity to other sources of noise such as audio/ video equipment, fans, two way radios, and high voltage/high current power lines. Heart rate readings are abnormally elevated. Television sets and/or antennas generate electro- magnetic interference. Move the treadmill a few inches away from the probable cause, or move the probable cause a few inches away from the treadmill, until the heart rate readings are accurate. Cell phones generate electromagnetic interference. Computers generate electromagnetic interference. Cars generate electromagnetic interference. High voltage power lines generate electromagnetic interference. Motor driven exercise equipment generates electro- magnetic interference. Another heart rate transmitter within 3 feet (1 meter) generates electromagnetic interference. 41

16. 2.3 R EADING R ACK AND A CCESSORY T RAYS The display console design includes a built-in reading rack (A) allowing a book or magazine to be supported during the workout. Three built-in accessory trays (B), two side trays to accommodate large items such as water bottles and one center tray for smaller items, are also included. 15 B A

5. This Operation Manual describes the functions of the following product: Integrity Series Treadmill (CLST) See "Specifications" in this manual for product specific features. Statement of Purpose: The treadmill is an exercise machine that enables users to walk or run, in place, on a moving surface. Life Fitness STRONGLY recommends seeing a physician for a complete medical exam before undertaking an exercise program, particularly if the user has a family history of high blood pressure or heart disease, is over the age of 45, smokes, has high cholesterol, is obese, or has not exercised regularly in the past year. If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breath, he or she must stop immediately. Life Fitness recommande FORTEMENT de consulter un médecin pour subir un examen médical complet avant de com- mencer tout programme d'exercice, et tout particulièrement si l'utilisateur a des antécédents familiaux d'hypertension ou de troubles cardiaques, s'il a plus de 45 ans, s'il fume, s'il a du cholestérol, s'il est obèse ou n'a pas fait d'exercice régulièrement depuis un an. Si, pendant l'utilisation de l'appareil, l'utilisateur ressent un malaise, des vertiges, des vertiges, des douleurs ou des diff i- cultés à respirer, il doit s'arrêter immédiatement. 4

40. T ROUBLESHOOTING THE T READMILL ( CONTINUED ) Malfunction Probable Cause Corrective Action Striding belt slips off-center. Floor surface is uneven. Check levelers and level treadmill. Check striding belt & re-tension as necessary. Refer to Section 6.6. Maximum speed is reduced. User is pushing striding belt. This occurs when the runner is run- ning faster than the striding belt will travel, with the result of the striding belt being pushed with the runner’s feet. Instruct users not to push striding belt in either direction. User is stalling striding belt.This will occur with heavier users at lower strid- ing belt speeds. The striding belt will “stall” if the user is traveling slower than the striding belt speed. Striding belt/deck malfunctions. The deck laminate is worn through or the underside of striding belt is glazed over (hard, glossy). Replace belt and deck. Power source is insufficient. Plug treadmill into a dedicated 20 amp circuit. Rubbing sound comes from underneath machine. Foreign objects may be stuck under- neath the machine. Inspect underneath striding belt and machine. Remove any debris or objects that may cause interference with the treadmill. Display does not illuminate when machine is powered on. Loose 10 pin connection at display console or DSP motor control board. Check all electrical connections for proper attachment. Contact Life Fitness Customer Support Services. 39

44. 6.5 T ROUBLESHOOTING THE iP OD ® Malfunction Probable Cause Corrective Action Cannot control iPod using console keypad controls. iPod is not fully connected due to interference with after market iPod protective cases. Remove after market iPod protective case and reconnect. Cannot hear iPod. iPod paused. Use iPod keypad controls on console to play a selection. Source selected is not currently set to iPod. Press Source Select key until iPod is displayed. Mute key is pressed. Press Mute key to unmute iPod source. Cannot control iPod volume using console keypad controls. Headphones are plugged into iPod instead of console head- phone jack. Plug headphones into console headphone jack. Volume control on iPod is being used with headphones plugged into console jack. Use console iPod keypad volume controls. Console displays a message that tells me to update my iPod firmware. The iPod is not compatible due to its outdated firmware. Visit www.apple.com for instructions on how to update your iPod device firmware. Console displays a message that tells me “iPod COMMUNI- CATION TIMEOUT”. Use of older third generation (or earlier) iPod is not sup- ported. Use newer iPod model. iPod battery charge is extremely low. Charge iPod to a minimum level before using. 43

41. T ROUBLESHOOTING THE T READMILL ( CONTINUED ) Malfunction Probable Cause Corrective Action Unit resets randomly or pauses. Power source is insufficient. Plug treadmill into a dedicated 20 amp circuit. Damaged ground prong is on line cord. Replace line cord. Line cord improperly seated in electrical outlet Inspect power connection at electrical outlet and at machine for proper contact. Emergency stop magnet is not engaged. Re-engage the emergency stop magnet. Towel or other item may be making contact with stop switch while user is running. Move all possible obstructions off display console and handlebar. Stop switch is activated with very light pressure or returns slowly after being pressed. Contact Life Fitness Customer Support Services. Stop switch cable is not making proper contact. Contact Life Fitness Customer Support Services. Main wire harness is pinched. Contact Life Fitness Customer Support Services. Ground path is open. Contact Life Fitness Customer Support Services. 40

18. 3.2 H EART R ATE M ONITORING T HE L IFEPULSE TM S YSTEM To use the treadmill’s Lifepulse TM system to check the heart rate during a workout, grasp the stainless steel sensors on the Ergo TM front handlebar. Two sensors are located on each of the handlebars. Contact must be maintained with all four sen- sors to obtain a heart rate. The console displays a heart rate within 20 to 30 seconds of contact with the sensors. Do not attempt to grasp the sensors at speeds above 4.5 mph or 7.2 kph. For these speeds, the use of a Polar telemetry heart rate chest strap is recommended. T HE O PTIONAL P OLAR ® T ELEMETRY H EART R ATE C HEST S TRAP The Life Fitness Treadmill is equipped with Polar® telemetry, a heart rate monitoring system in which electrodes, pressed against the skin, transfer heart rate signals to the treadmill console. These electrodes are attached to a Polar telemetry heart rate chest strap that the user wears during the workout. The Polar telemetry heart rate chest strap is optional. Con- tact Life Fitness Customer Support Services to order. See the diagram below for correct positioning of the Polar telemetry heart rate chest strap. The electrodes (A), which are the two grooved surfaces on the underside of the strap, must remain wet to transmit accurately the electrical impulses of the heart back to the receiver. Moisten the electrodes. Then, secure the Polar telemetry heart rate chest strap as high under the chest muscles as possible. The strap should be snug, but comfortable enough to allow for normal breathing. The transmitter strap delivers an optimal heart rate reading when the electrodes are in direct contact with bare skin. How- ever, it functions properly through a thin layer of wet clothing. If it becomes necessary to re-moisten the Polar telemetry heart rate chest strap electrodes, grasp the center of the strap, pull it away from the chest to expose the two electrodes, and re-moisten them. During the setup of a heart rate zone training workout, the user will be required to enter a start-up speed. If a Polar telemetry heart rate chest strap is not detected, the maximum allowable speed is 4.5 mph. If a Polar telemetry heart rate chest strap is detected the maximum speed is 14 mph. A A 17

31. C OOL D OWN Life Fitness' unique Cool Down Protocol automatically customizes every cool down based on each user's workout per- formance. Workout performance factors such as speed, incline, duration and heart rate determine the duration and inten- sity of the cool down. D IMMING The dimming feature controls the brightness of the treadmill console display. To change the default brightness setting, press the PERSONAL TRAINER button repeatedly until the MESSAGE CENTER displays “DIMMING,” and press ENTER. Then use the arrow keys to increase or decrease the brightness to the desired setting, and press ENTER to save the new setting; or press CLEAR to revert to the default brightness setting. If a new brightness setting is selected for a workout, that setting remains in place until it is manually changed, or the work- out concludes. When a new workout begins the brightness reverts to the default setting. 4.5 L OGGING O NTOTHE N ETWORK When the treadmill is connected to a network, the MESSAGE CENTER displays a prompt to log on with a personal ID number. Press ENTER PIN, then using the NUMERIC KEYPAD enter the correct digits of the ID number and press ENTER. 30

13. 2 C ONSOLE O VERLAY 2.1 C ONSOLE O VERLAY O VERVIEW The computerized display console on the treadmill allows the user to tailor a workout to personal fitness abilities and goals and to monitor progress. With this easy-to-use console, the user can track fitness improvement from one workout to the next. Enter PIN Enter Weight iPod ® / TV The heart rate displayed may be inaccurate and should be used for reference only. La fréquence cardiaque affichée peut être inexacte et ne doit être utilisée qu'à titre de référence. A C D E F L I H J G K B 12

4. Before using this product, it is essential to read this ENTIRE operation manual and ALL assembly instructions. It describes equipment setup and instructs members on how to use it correctly and safely. Avant d'utiliser ce produit, il est indispensable de lire ce manuel d'utilisation dans son INTÉGRALITÉ, ainsi que TOUTES les instructions d'installations. Ce manuel explique comment installer l'équipement et comment l'utiliser correctement et sans danger. FCC Warning - Possible Radio / Television Interference Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Class SB (Studio): Professional and / or commercial use. CAUTION: Any changes or modifications to this equipment could void the product warranty. Mise en garde : tout changement ou toute modification de ce matériel peut annuler la garantie du pro- duit. Any service, other than cleaning or user maintenance, must be performed by an authorized service representative. There are no user serviceable parts. 3

26. E XTREME H EART R ATE TM This intense, varied workout is designed to help more experienced users to break through fitness improvement plateaus. The workout alternates between two target heart rates as quickly as possible. The effect is similar to that of running sprints. The user must wear a Polar telemetry heart rate chest strap or grip the Lifepulse TM sensors throughout the work- out. Note: It is recommended that users who run at speeds faster than 4.5 mph wear the Polar telemetry heart rate chest strap and do not use the Lifepulse TM sensors. When setting up the workout, the user enters a target heart rate and selects a walk speed and a jog speed. After a stan- dard three-minute warm-up, the treadmill accelerates to the jog speed, and the incline increases, until the user reaches the target heart rate goal of 85% of the theoretical maximum(HRmax). That target rate is maintained for a stabilizing pe- riod. Then, the incline is reduced to 0%, and the treadmill slows to the walk speed. When the heart rate falls to the 65% of HRmax goal, it is maintained there for a stabilizing period. The program repeats the alternating of speeds and incline levels, continuing this pattern throughout the duration. If the user does not reach a heart rate goal after five minutes, the MESSAGE CENTER displays a prompt to increase or decrease speed, depending on whether the workout is in a hill or valley phase. The program does not proceed to a new heart rate goal until the user reaches the current goal. Cool Down 118 BPM 65% HRmax 118 BPM 65% HRmax 118 BPM Jog Speed Walk Speed Jog Speed Walk Speed Jog Speed Walk Speed Jog Speed Walk Speed Jog Speed Walk Speed Jog Speed Walk Speed User Example (40 year old / 153 recommended BPM) 85 percent of theoretical maximum (HR ) max EXTREME HEART RATE Workout Profile 85% HRmax Stabilizing Period Stabilizing Period Stabilizing Period Stabilizing Period Stabilizing Period Stabilizing Period 153 BPM 85% HRmax 153 BPM 85% HRmax 153 BPM Warm-up 118 BPM 25

24. H EART R ATE H ILL TM This program combines the standard HILL workout profile with the concept of Heart Rate Zone Training. The default tar- get heart rate is calculated as 80% of the theoretical maximum(HRmax), but the user can adjust the target rate during the workout setup. All hills and valleys are percentages of HRmax. The workout consists of three hills that target three heart rate goals: • The first hill brings the heart rate to 70% of HRmax. • The second hill increases the rate to 75% of HRmax. • The third hill matches the Target Heart Rate bringing the heart rate to 80% of HRmax. The valley is always defined as 65% of HRmax. After a standard three-minute warm-up, the workout progresses toward the first hill and heart rate goal. Once the user reaches 70% of HRmax, the hill continues for one minute. When the minute expires, the level decreases into a valley. Once the user's heart rate falls to 65% of HRmax, the valley continues for one minute, then the next hill begins with its corresponding heart rate goal. After the user completes the third hill/valley pair, the program returns to the first hill and r e- peats the cycle as long as the duration allows. At the end of the duration, the workout goes into a cool-down phase. If the heart rate goes above the theoretical maximum for more than 45 seconds, the treadmill automatically goes into pause mode. If the user does not reach a heart rate goal after five minutes, the MESSAGE CENTER displays a prompt to in- crease or decrease speed, depending on whether the workout is in a hill or valley phase. The program does not proceed to a new heart rate goal until the user reaches the current goal. 117 BPM 85% THR 65% HRmax 70% HRmax 75% HRmax HEART RATE HILL Workout Profile 80% HRmax Hill Hill Hill Valley Valley Valley 65% HRmax 65% HRmax 65% HRmax 117BPM 117BPM 117BPM 126 BPM 135 BPM User Example: 80 (40 year old / 144 recommended BPM) percent of theoretical maximum (HR ) max 144 BPM 23

25. H EART R ATE I NTERVAL TM This program also combines the standard HILL workout profile with the concept of Heart Rate Zone Training. The default target heart rate is calculated as 80% of the theoretical maximum(HRmax), but the user can adjust the target rate during the workout setup. The workout alternates between a hill, which brings the heart rate up to the target rate of 80% of HRmax, and a valley which brings the heart rate down to 65% of HRmax. After a standard three-minute warm-up, the workout progresses toward the first hill and heart rate goal. Once the goal is reached, the hill continues for three minutes, then the level decreases into a valley. Once the 65% of HRmax goal is reached, the valley continues for three minutes, after which the next hill begins. The user's fitness level determines the number of hills and valleys encountered within the duration. At the end of the duration, the workout goes into a cool down phase. If the heart rate goes above the theoretical maximum for more then 45 seconds, the treadmill automatically goes into pause mode. If the user does not reach a heart rate goal after five minutes, the MESSAGE CENTER displays a prompt to increase or decrease speed, depending on whether the workout is in a hill or valley phase. The program does not proceed to a new heart rate goal until the user reaches the current goal. Warm-up 65% HRmax HEART RATE INTERVAL Workout Profile 80% HRmax Hill Hill Valley Valley Valley Hill 65% HRmax 80% HRmax 65% HRmax 80% HRmax 117 BPM 117 BPM 117 BPM User Example: 80 (40 year old / 144 recommended BPM) percent of theoretical maximum (HR ) max 144 BPM 144 BPM 144 BPM 117 BPM 24

34. M ANAGER ’ S C ONFIGURATION (O PTIONAL S ETTINGS ) ( CONTINUED ) Setting Default Value Description Erase Custom Workouts Not Applicable If this option is selected, all six custom workout programs will be erased. Maximum Incline 15.0 This option changes the maximum incline grade to a value lower than 15% Start Message Setup NO MESSAGE This option allows managers to create and change the Start Message. Quick Start via Numeric Keys Allowed Use this option to disable or enable QUICK START work- outs via the Numeric Keys. See Using Quick Start Dis- able . Fit Test Plus On ( International: Off) This option enables / disables the additional Fit Tests. These include: Army PFT; Navy PRT; Marines PFT; WFI Submax Protocol, and PEB. System Beeps On This option controls whether the system speaker beep is generated on key presses. Language Select Off If this option is enabled, users can set the User Language. Choices include: English, German, French, Spanish, Italian, Dutch, and Russian. Marathon Mode Off This option allows the user to workout indefinitely. Belt Wear Notification Indicator Off If enabled, this option will alert a manager if a belt notification exists. iPod Video Enable This feature allows control over allowing iPod video tracks to be played on the Life Fitness Attachable TV, if present. If enabled by selecting the On setting, and an iPod video track is selected, the video shall be routed to the TV. Otherwise, the video shall not. AUX Source Off This setting allows control over whether or not an optional CSAFE compatible audio device attached to the CSAFE connector shall be selectable as an audio source with the Source Select key. TV GAIN 2 This setting allows control over the console earphone volume range for the Life Fitness Attachable TV Source. The range of settings are from 0 (Low) to 7 (High). 33

6. 1 G ETTING S TARTED 1.1 I MPORTANT S AFETY I NSTRUCTIONS Read all instructions before using the treadmill. • DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or attempting any maintenance activity. • WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet. • WARNING: Keep the area 6.5 feet (2 meters) by 3 feet (1 meter) behind the treadmill clear of any obstruc- tions, including walls, furniture, and other equipment. • WARNING: Be sure the emergency stop lanyard is clipped to the user and in proper position on the tread- mill before beginning any workout. • To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet. • Never operate a Life Fitness product if it has a damaged power cord or electrical plug, or if it has been dropped, damaged, or even partially immersed in water. Contact Life Fitness Customer Support Services. • Position this product so that the power cord plug is accessible to the user. • Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Do not run the power cord on the floor under or along the side of the treadmill. Refer to Section 1.2 for proper power cord routing. • If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a similarly qualified person to avoid a hazard. • Do not use this product in areas where aerosol spray products are being used or where oxygen is being adminis- tered. Such substances create the danger of combustion and explosion. • Always follow the console instructions for proper operation. • Close supervision is necessary when used near children, invalids or disabled persons. • Do not use this product outdoors, near swimming pools or in areas of high humidity. • Never operate a Life Fitness product with the air openings blocked. Keep air openings free of lint, hair, or any other obstructing material. • Never insert objects into any opening in this product. If an object should drop inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Life Fitness Customer Support Services. • Never place liquids of any type directly on the unit, except in an accessory tray or holder. Containers with lids are recommended. • Do not use this product in bare feet. Always wear shoes. Wear shoes with rubber or high-traction soles. Do not use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles. • Keep all loose clothing, shoelaces, and towels away from moving parts. • Do not reach into, or underneath, the unit or tip it on its side during operation. • Handrails may be held to enhance stability as needed, but are not for continuous use. • Never mount or dismount the treadmill while the running belt is moving. Use the handrails whenever additional stability is required. In case of an emergency, such as tripping, grasp the handrails, and place the feet on the side platforms. • Never walk or jog backwards on the treadmill. 5

8. 1 D ÉMARRAGE 1.1 CONSIGNES DE SÉCURITÉ IMPORTANTES Lire toutes les instructions avant d'utiliser le tapis roulant. • DANGER: Pour réduire les risques de décharge électrique, toujours débrancher cet appareil Life Fitness avant le nettoyage ou toute mesure d'entretien. • AVERTISSEMENT: Pour réduire les risques de brûlures, d'incendies, de décharges électriques ou de blessures, chaque appareil doit absolument être branché sur une prise électrique correctement mise à la terre. • AVERTISSEMENT: Conserver une zone de 2 m sur 1 m libre de toute obstruction derrière le tapis roulant (aucun mur, meuble ou autre appareil). • AVERTISSEMENT: S'assurer que la dragonne d'arrêt d'urgence est attachée à l'utilisateur et fixée adéquatement au tapis roulant avant de commercer un exercice. • Pour débrancher, mettre l'appareil hors tension au niveau de l'interrupteur d'alimentation, puis retirer la fiche de la prise électrique. • Ne jamais faire fonctionner un produit Life Fitness dont la fiche ou le cordon d'alimentation est endommagé, ni aucun appareil qui serait tombé ou aurait été endommagé ou même partiellement plongé dans l'eau. Appeler le service clientèle de Life Fitness. • Placer ce produit de manière à ce que l'utilisateur puisse accéder à la fiche du cordon d'alimentation. • Tenir le cordon d'alimentation à l'écart de toute surface chauffée. Ne pas tirer l'appareil par le cordon d'alimentation; ne pas utiliser le cordon comme poignée. Ne pas faire passer le cordon sur le sol, sous le tapis roulant, ni le long de l'appareil. Se reporter à la section 1.2 pour la disposition adéquate du cordon d'alimentation. • Si le cordon d'alimentation électrique est endommagé, il doit être remplacé par le fabricant, par un réparateur agréé ou par une personne qualifiée afin d'éviter tout danger. • Ne pas utiliser ce produit dans des salles où des vaporisateurs aérosols sont employés ou bien où de l'oxygène est administré. Ces substances créent des risques de combustion et d'explosion. • Les instructions de la console doivent toujours être suivies pour obtenir un fonctionnement correct. • Une surveillance étroite est nécessaire si l'appareil est utilisé près d'enfants ou de personnes invalides ou handi- capées. • Ne pas utiliser ce produit à l'extérieur, près d'une piscine ou dans des endroits très humides. • Ne jamais faire fonctionner d'appareil Life Fitness dont les orifices d'aération seraient bloqués. Les garder exempts de peluches, de cheveux ou de toute obstruction. • Ne jamais rien insérer dans les ouvertures de cet appareil. Si un objet tombe à l'intérieur de l'appareil, couper l'ali- mentation électrique, débrancher le cordon de la prise et le récupérer avec précaution. S'il est impossible de l'attein- dre, communiquer avec le service à la clientèle de Life Fitness. • Ne jamais placer aucun liquide directement sur l'appareil, sauf dans le plateau pour accessoires ou un support prévu à cet effet. Il est recommandé d'utiliser des conteneurs munis de couvercles. • Ne pas utiliser cet appareil pieds nus. Toujours porter des chaussures. Porter des chaussures avec des semelles en caoutchouc ou fournissant une très bonne adhérence. Ne pas utiliser de chaussures à talons, à semelles en cuir ou munies de crampons. S'assurer qu'aucun caillou n'est incrusté dans les semelles. • Éloigner les vêtements lâches, les lacets et les serviettes des pièces en mouvement. • Ne pas placer les mains sous l'appareil ou dans l'appareil, et ne pas le renverser sur le côté pendant le fonction- nement. 7

45. T ROUBLESHOOTING THE iP OD ® ( CONTINUED ) Malfunction Probable Cause Corrective Action Cannot see iPod video on Life Fitness Attachable TV when played. No TV is attached. Attach a Life Fitness Attachable TV. Source select is switched to TV instead of iPod. Press Source Select until the iPod message is displayed. iPod was connected while cur- rently playing a video selection (known Apple issue with iPod device firmware). Stop video play. Navigate to your video selection and restart video using either the iPod or console keypad controls. Audio track containing video begins playing as part of an audio playlist (known Apple issue with iPod device firmware). Play track as a video selection. Cannot navigate iPod menus. Use of console keypad controls to navigate iPod menus. Use iPod controls to navigate menus and select playlists. Use console keypad controls to Play/Pause and to change volume and tracks. Cannot control iPod volume using iPod slider ring. Use of iPod slider ring controls to adjust iPod volume when headphones are plugged into the console jack. Use console volume arrow keys to control volume. No controls to change playlist on console. Use of console keypad controls to change playlist on iPod. Select playlist on iPod using iPod controls. 44

48. 7 S PECIFICATIONS 7.1 L IFE F ITNESS CLST T READMILL S PECIFICATIONS Designed use: Heavy / Commercial Maximum user weight: 400 pounds / 181 kilograms Speed range: 0.3 - 14.0 mph (0.5 - 23 kph) in 0.1 increments Elevation range: 0%-15% (in 0.1% increments) Drive train: AC motor with MagnaDrive™ motor controller Motor type: Variable Speed AC Motor size: 4.0 HP continuous duty Power requirements: 120 volt, 20 amp (U.S.). See Electrical Requirements for requirements outside the United States. Rollers: 3.5 inch / 9 centimeter diameter, precision-crowned, front and back Striding belt: 60" Length x 20" Width (152 cm Length x 51 cm Width), multi-ply Waxing system: Lubricant-Infused Striding Belt Deck type: 3/4" medium density reversible fiberboard Shock absorption system: Patented FlexDeck ® Shock Absorption System with Lifesprings TM Ergo TM front handrail: Ergonomically shaped, overmolded elastomeric grips Side handrails: 26" (66 cm) long, flared, cantilevered, overmolded elastomeric grips Stop systems: Red and yellow magnetic lanyard emergency stop system and Session Stop Push Switch raised and prominently positioned Workouts: Quick Start, Manual, Cardio, Fat Burn, Heart Rate Hill TM , Heart Rate Interval TM , Extreme Heart Rate TM Random, Hill, Sport Training TM (5K and 10K), Speed Interval Training, Calories Goal, Distance Goal, Time in Zone Goal, Time-based Goal, Custom Workouts (6), Life Fitness Fit Test, Army PFT, Navy PRT, Air Force PRT, Marine PFT, WFI Submax Protocol, Physical Efficiency Battery (PEB), Cool Down Mode, Marathon Mode Levels: 20 (Hill, Random, 5K and 10K workouts) Heart rate monitoring systems: Patented Lifepulse™ digital contact heart rate and Polar® telemetry-compatible heart rate monitor ing system Console displays: Elapsed time, total distance, distance climbed, total calories burned, pace, calories burned per hour, heart rate, target heart rate, Watts, METS, workout profile, custom start messaging, speed, incline Ports (2): Type RJ45, interchangeableNetwork ready connection and Fitness Entertainment port (power compli- ant with FitLinxx CSAFE specification dated August 4, 2004: 4.75VDC to 10VDC; maximum current of 85mA). iPod power and charging: 5Vdc @ 500mA iPod Compatibility: Play / Pause Volume Control / Mute Previous Track / Next Track (Button Tap) Scan Forward / Scan Back (Button Hold) Headphone jack: 3.5mm Stereo, 150mW max 47 Base Only Console Only Length: 83 in. / 211 cm. 33.5 in. / 85 cm. Width: 37 in. / 94 cm. 5 in. / 13 cm. Height: 63.5 in. / 161 cm. 15.75 in. / 40 cm. Low Voltage: 403 lbs. / 183 kg. 9 lbs. / 4 kg. High Voltage: 413 lbs. / 187 kg. Step-Up Height: 11 in. / 28 cm. Length: 87 in. / 221 cm. 36.5 in. / 93 cm. Width: 43 in. / 109 cm. 6.5 in. / 85 cm. Height: 23.5 in. / 60 cm. 19 in. / 48 cm. Low Voltage: 465 lbs. / 211 kg. 14 lbs. / 6 kg. High Voltage: 475 lbs. / 215 kg. PHYSICAL DIMENSIONS SHIPPING DIMENSIONS

10. 1.2 S ETUP Read the Operation Manual before setting up the Life Fitness Treadmill. Place the treadmill where it will be used before beginning the setup procedure. E LECTRICAL P OWER R EQUIREMENTS The Life Fitness Treadmill requires a dedicated* line with isolated neutral according to the electrical configurations listed in the chart below. * One individual branch circuit for each treadmill per NEC article 210-21 (b) (1) and 210-23 (or other appropriate, country spe cific electrical compliance guidelines). The hot and neutral wires must each be routed independently (not looped or tied to other circuits)" . Note: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet, have a proper outlet installed by a qualified electrician. G ROUNDING I NSTRUCTIONS This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a path of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the equip- ment. Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances. A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North America. If a properly grounded, 20-amp outlet is not available, one must be installed by a qualified electrician. Models drawing 16 amps or more must be installed on a dedicated line. IL EST ABSOLUMENT INTERDIT d'employer un adaptateur temporaire pour brancher cette fiche sur une prise bipolaire en Amérique du Nord. Si aucune prise de 20 A correctement mise à la terre n'est disponible, en faire installer une par un électricien qualifié. Les modèles utilisant 16 A ou plus doivent être branchés sur un circuit spécialisé. DANGER: A risk of electrical shock may result from improper connection of the equipment-grounding con- ductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any modification to the electrical plug will result in a voided warranty. Un branchement incorrect du conducteur de mise à la terre peut entraîner des risques de décharge électrique. Consulter un électricien si des doutes subsistent quant à la technique de mise à la terre. NE PAS MODIFIER la fiche fournie avec l'appareil. Si elle ne s'adapte pas à une prise, faire installer une prise correcte par un électricien qualifié. Toutemodification à la fiche annule la garantie. 9

27. F IT T EST The treadmill Fit Test program is another exclusive feature of this versatile treadmill. The Fit Test workout estimates car- diovascular fitness and can be used to monitor improvements in endurance every four to six weeks. The user must grasp the hand sensors (if equipped) when prompted, or wear a Polar telemetry heart rate chest strap as the test score calcula- tion is based on a heart rate reading. The workout duration will be five minutes total with a one minute warm-up at 0% in- cline followed by four additional minutes at a 5% incline. Immediately afterward, the console will take the user's heart rate reading, calculate a fitness score and display the score in the MESSAGE CENTER. The Fit Test is considered to be a submax VO 2 (volume of oxygen) test. It gauges how well the heart supplies oxygenated blood to the exercising muscles and how efficiently those muscles receive oxygen from the blood. Physicians and exer- cise physiologists generally regard this test as a good measure of aerobic capacity. To set up the Fit Test: • Press the FIT TEST button repeatedly until the FIT TEST option appears in the message center. Press ENTER to select the FIT TEST option. • The message center will prompt for a user weight (ENTER WEIGHT). Use the NUMERIC keys or UP/DOWN arrow keys to input your weight. Press ENTER to accept the weight. • The message center will next prompt for a user age (ENTER AGE). Use the NUMERIC keys or UP/DOWN arrow keys to input your age. Press ENTER to accept the age. • The message center will next prompt for a user gender (SELECT GENDER). Using the UP/DOWN arrow keys, select a gender. Press ENTER to accept the gender selection. • The message center will next prompt for a workout level (ENTER SPEED)(2-4.5 mph). Consult the following rec- ommended fit test level chart for an appropriate effort level based on your age, gender and activity level. Use the NUMERIC keys or UP/DOWN SPEED arrow keys to enter the corresponding level. After the five-minute FIT TEST is completed, a FIT TEST score and rating will be displayed. F IT T EST P ROGRAM S UGGESTED E XERTION L EVELS Inactive Active Very Active Treadmill Fit Test Level 2-3 mph 3-4 mph 3.5-4.5 mph 3.2-4.8 kph 4.8-6.4 kph 5.6-7.2 kph Note: Treadmill will incline to 5% after a one minute warm-up. Suggested exertion levels should be used as a guideline for setting up the Fit Test program. The goal is to elevate the user's heart rate to a level that is between 60%-85% of their theoretical maximum heart rate. Within each suggested range, these additional guidelines can be used: Lower Half of Range Upper Half of Range higher age lower age lower weight higher weight* shorter taller * In cases of excessive weight, use lower half of range The computer will not accept: • heart rates less than 52 or greater than 200 beats per minute • body weights less than 75 pounds (34 kg) or greater than 400 pounds (181 kg) • ages below 10 or over 99 years • data input that exceeds human potential 26

35. P ROGRAMMING C USTOM W ORKOUTS After entering the Manager’s Configuration (Optional Settings), use the TIME arrow keys to scroll through the list of config- uration options, or allow the MESSAGE CENTER to scroll automatically through the options. When “CUSTOM WORK- OUT ENTRY” appears, press ENTER to select this option. The custom workouts are identified as numbers 1 through 6. Enter the desired number on the NUMERIC KEYPAD or use the arrow keys to scroll through the displayed numbers. Press ENTER to confirm the number selection. If a workout does not already exist for that number, the MESSAGE CENTER displays a request to begin creating the workout. If a workout does exist for the number in question, the MESSAGE CENTER displays a statement to that effect, followed by the option to modify the existing workout. The steps for modifying a workout are the same as those for creating a new work- out: Using the TIME arrow keys or the NUMERIC keypad, select a workout duration time in minutes and press ENTER. The duration cannot exceed the MAX DURATION set in the Manager's Configuration. Next, select the interval type. Use the arrow keys to toggle between the displayed options, and press the ENTER key to select the desired interval type. Options are: • Speed/Incline, in which a treadmill speed and/or incline grade is selected for each interval. • Target Heart Rate, in which a maximum target heart rate is selected for each interval. The number of intervals is always 30, so the length of each interval equals the selected duration divided by 30. Each interval is identified by the time at which it occurs during the workout. If Speed/Incline is selected, the MESSAGE CENTER displays each interval, identified as the time at which the interval occurs. For each displayed interval, enter a speed using the SPEED arrow keys, and/or enter an incline grade using the INCLINE arrow keys. Press ENTER to confirm each selection. After values are selected for all 30 intervals, the MESSAGE CENTER displays the statement “CUSTOM WORKOUT COMPLETED” followed by a prompt to create a workout for the next number. If Target Heart Rate is selected, the MESSAGE CENTER displays each interval identified as a numeral from 1 to 30. For each displayed interval, enter a target heart rate using the arrow keys. Press ENTER to confirm each selection. After val- ues are selected for all 30 intervals, the MESSAGE CENTER displays the statement “CUSTOM WORKOUT COMPLETED” followed by a prompt to create a workout for the next number. U SING Q UICK S TART D ISABLE This configuration has two possible values which are selected using the incline arrow keys. The values are as follows: • Quick Start with numeric keys “allowed” • Quick Start with numeric keys “not allowed” The default value is “allowed”. This means that a user can start a QUICK START workout by simply entering a desired workout speed using the numeric keys only. If the configuration is set to “not allowed”, a user cannot use the numeric keys to start a QUICK START workout. A QUICK START workout can always be started by pressing the QUICK START key. U SING T HE S TART M ESSAGE S ETUP This configuration allows for a custom start-up message to be displayed before the default “Select Workout or Press Quick Start” message. The custom message can contain up to 52 characters. C REATING / C HANGING A S TART M ESSAGE After entering the Manager’s Configuration (Optional Settings), scroll to the START MESSAGE SETUP option and press ENTER. Use the SPEED arrow keys to select an available letter, number or special character. Use the INCLINE arrow keys to move forward or backward throughout the message, or insert spaces one character at a time. The current charac- ter will blink until the position is moved with the INCLINE arrow keys. 34

36. S AVING A S TART M ESSAGE To save the START MESSAGE, press ENTER. “MESSAGE SAVED” will appear in the message center confirming the message has been saved. To exit the start message setup without saving, press the clear key twice. “MESSAGE NOT SAVED” will appear in the MESSAGE CENTER confirming the message has not been saved. E RASING A S TART M ESSAGE After entering the Manager’s Configuration (Optional Settings), scroll to the START MESSAGE SETUP option and press ENTER. Press enter to enter the current START MESSAGE. Press the COOL DOWN key to erase the current START MESSAGE. “MESSAGE ERASED” will appear in the MESSAGE CENTER stating the message has been erased. M ARATHON M ODE Marathon Mode has no preset or settable goal. It allows the user to workout indefinitely. A workout in Marathon Mode ends only if the user chooses to end it or a stop system is activated. To enable the Marathon Mode, enter the Manager's Configuration (Optional Settings). Using the TIME UP / DOWN arrow keys, scroll to MARATHON MODE. Once MARATHON MODE appears in the Message Center, press any of the INCLINE or SPEED UP/DOWN arrow KEYS to toggle the mode from OFF to ON. While setting up a workout, enter a time value greater than the upper limit displayed on the console. Once the upper time limit is exceeded, the message center will display MARATHON MODE. Within a workout, Marathon Mode can be immediately ended by pressing the TIME Key. Pressing the TIME Key makes it possible to set a time goal as long as it's not less than the time already spent in the workout. U SER L ANGUAGE S ELECT If enabled, this option allows users to select the language by which to interact with the unit during a workout. To enable the User Language Select option, enter the Manager’s Configuration (Optional Settings). Using the TIME UP / DOWN arrow keys, scroll to LANGUAGE SEL. Once LANGUAGE SEL appears in the Message Center, press any of the INCLINE or SPEED UP/DOWN arrow keys to toggle the mode from OFF to ON. The console will display the message “SELECT LANGUAGE USING ARROW KEYS”. The user can select from a list of available languages (English, German, French, Spanish, Italian, Dutch, and Russian) using any of the arrow keys. Press enter when the desired language appears to select that language. A workout can now be started using the selected language. Selecting a language is not necessary to begin a workout. Simply press the QUICK START key to start a work- out or any of the program keys to begin workout programming using the default language. 35

33. 32 5.2 M ANAGER ’ S C ONFIGURATION (O PTIONAL S ETTINGS ) Setting Default Value Description Language English This option allow for the setting of a new default language for user and service messages. Maximum Workout Duration 60 Minutes This feature allows the setting of maximum workout duration limits. English / Metric Units English (International: Metric) This option sets the measurement unit type for weight, distance, and speed. Custom Workout Entry None Defined This feature allows for creation or modification of six custom personal trainer workouts. Telemetry On Switching on the telemetry feature makes it possible to use the Polar®-compatible Heart Rate Zone Training exercise Polar telemetry heart rate chest strap for monitoring the heart rate. Maximum Speed 14.0 mph (International: 23 kph) This option allows for setting the fastest speed at which the treadmill can operate. Minimum Speed 0.5 mph (International: 0.8 kph) This option allows for setting the slowest speed at which the treadmill can operate. Pause Timeout 1 Minute This sets the maximum time during which a workout can remain in pause mode. WATTS Display Off (International: On) If this option is enabled, the MESSAGE CENTER displays the Watts equivalent of the step rate. METS Display Off If this option is enabled, the MESSAGE CENTER displays the METs equivalent of the step rate. Pace Display On If this option is enabled, the rate of minutes per mile is displayed. Calorie Per Hour (CPH) Display On (International: Off) If this option is enabled, the MESSAGE CENTER displays the number of calories burned per hour during the workout. Distance Climbed Off If this option is enabled, the total distance climbed, based on the incline and speed of the treadmill, is displayed. Acceleration Rate 3 This sets the rate at which the treadmill accelerates to the selected speed, ranging from one (slowest) to five (fastest). Deceleration Rate 3 This sets the rate at which the treadmill decelerates to the selected speed, ranging from one (slowest) to five (fastest).

43. T ROUBLESHOOTING THE O PTIONAL P OLAR ® T ELEMETRY H EART R ATE C HEST S TRAP ( CONTINUED ) Malfunction Probable Cause Corrective Action Heart rate reading is erratic or absent entirely. Belt transmitter electrodes are not wet enough to pick up accurate heart rate readings. Wet the belt transmitter electrodes (see Section 3.2) . Belt transmitter electrodes are not laying flat against the skin. Ensure the belt transmitter elec- trodes are laying flat against the skin (see Section 3.2) . Belt transmitter needs cleaning. Wash the belt transmitter with mild soap and water. Belt transmitter is not within 3 feet (1 meter) of the heart rate receiver. Make sure the chest strap trans- mitter is within 3 feet (1 meter) of the heart rate receiver. Polar telemetry heart rate chest strap battery is depleted. Contact Life Fitness Customer Support Services for instructions on how to have the Polar teleme- try heart rate chest strap replaced. Polar telemetry heart rate chest strap did not lock in with the heart rate receiver. Make sure the Polar telemetry heart rate chest strap is installed and move closer to the heart rate receiver. Wait up to 10 seconds for the heart rate to display on the console. Notes: 1. Ensure proper adherence of the Polar telemetry heart rate chest strap to user’s chest. 2. Ensure proper conductivity be- tween the electrodes and user’s chest. 3. If needed, use the Polar watch to verify chest strap’s operation. 42

46. 6.6 H OW TO A DJUST AND T ENSION THE S TRIDING B ELT Do not move the treadmill or place hands under the treadmill while it is plugged into an electrical outlet! T HE B ELT T ENSIONING B OLTS A 5/16-inch hex key wrench is required for this task. The Life Fitness Treadmill has access holes in the rear roller guards which allow access to the tensioning bolts. These tensioning bolts make it possible to adjust the tracking and centering of the striding belt (A) without removing the guards. Note: It is extremely important that the treadmill be correctly leveled prior to any tracking adjustments. An unstable unit may cause striding belt misalignment. See "How To Stabilize the Life Fitness Treadmill" in Section 1.2 prior to attempting any rear roller adjustments. Before proceeding, it is helpful to visualize the REAR ROLLER (B) pivot point (C). Each adjustment made to one side of the ROLLER must be met with an equal and opposite adjustment (D) to the other side of the ROLLER to maintain an ideal belt tension at the pivot point. T RACKING (C ENTERING ) A S TRIDING B ELT Two people are needed to perform this procedure. 1. Locate the two access holes to the belt tensioning bolts on each of the rear roller guards. 2. One person stands on the side rails of the treadmill and straddles the belt. This person presses the MANUAL workout and sets the belt speed to 2.5 mph (4.0 kph). 3. If the striding belt has moved to the right, the second person turns the right tension bolt a quarter-turn clockwise and then turns the left tension bolt a quarter-turn counter-clockwise to make the striding belt track back to the center of the roller. If the striding belt has moved to the left, turn the left tension bolt a quarter-turn clockwise and then turn the right ten- sion bolt a quarter-turn counter-clockwise to make the striding belt track back to the center of the roller. 4. Repeat the adjustments until the striding belt appears centered. Allow the machine to continue running for several minutes at 4.0 mph (6.4 kph) to observe if tracking remains stabilized. Note: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services. Do not over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may overstretch and damage the striding belt or roller 45

14. 2.2 C ONSOLE O VERLAY D ESCRIPTION A. WORKOUT PROFILE WINDOW: During a workout, interval hills and valleys appear in this window as rows of light stacked in columns. The number of lit rows within a column corresponds to an incline percentage. B. MESSAGE CENTER: This window displays step-by-step instructions for setting up a workout. During a workout, it dis- plays calories, distance, time, incline, speed and heart rate. Additionally, the MESSAGE CENTER displays calories per hour, METS, Watts, pace in minutes per mile/kilometer, and distance climbed, if enabled to do so in the Manager’s Configuration. See Section 5.1 Entering and Using the Service Menu. C. TIME, INCLINE, and SPEED arrow keys: Press these keys to increase or decrease the workout time, the incline of the treadmill deck, or the striding belt speed. The MESSAGE CENTER displays the input data in sections located just above the keys. Additionally, any of these keys may be pressed to set up a workout or to change Manager’s Configuration set- tings. D. NUMERIC keypad: Use NUMERIC keys to enter exercise time, difficulty level, belt speed, weight, distance, goal se- lection, gender and target heart rate. CLEAR key: Press this key once to clear data not yet entered. Press it twice in succession while programming to reset the treadmill and restart the programming sequence. ENTER key: Press this key to confirm entries of workout setup values, as displayed in the MESSAGE CENTER. E. WORKOUT SELECTION keys: Press any of these keys to select the program identified on the given key’s label. These programs include: MANUAL, FAT BURN , CARDIO, ZONE TRAINING +, RANDOM , HILL , PERSONAL TRAINER, FIT TEST, and SPEED INTERVAL . F. QUICK START key: Press this key to begin a manual workout immediately, without having to select a workout pro- gram. Once the workout is in progress, use the arrow keys or the NUMERIC KEYPAD to change the intensity level or workout duration as desired. PAUSE key: Press this key to stop the belt and hold the current workout. Continue the workout by pressing the ENTER key. COOL DOWN key: Press this key to begin an automatically customized workout cool down. G. ENTER WEIGHT key: Press this key to enter a user weight during a workout. Use the TIME ARROW keys or the NUMERIC keypad to enter a weight value. ENTER PIN key: Log on to the FitLinxx Interactive Fitness Network using a dedicated PIN Number. A FitLinxx Interac- tive Fitness Network shall be supported through the CSAFE console port connector as a CSAFE Compatible Device. H. A circular-shaped STOP magnet is located on the left side of the panel below the display console. A cord with a clip is attached to this magnet. Before starting a workout, attach the clip to clothing. To stop the striding belt on the treadmill, pull the cord, removing the magnet from the console. Replace the magnet to reset the system. I. A circular-shaped STOP button is located on the right side of the panel below the display console. Press the button to stop the striding belt and end the current workout. 13

28. I f you make an error when entering any Fit Test data, you can correct it by pressing CLEAR, inputting the correct informa- tion and pressing ENTER. It is important for you to take the Fit Test under similar circumstances each time. Your heart rate is dependent on many factors, including: • amount of sleep the previous night (at least seven hours is recommended) • time of day • time you last ate (two to four hours after the last meal is recommended) • time since you last drank a liquid containing caffeine or alcohol, or smoked a cigarette (at least four hours is rec- ommended) • time since you last exercised (at least six hours is recommended) For the most accurate Fit Test results, you should perform the Fit Test on three consecutive days and average the three scores. Note: To receive a proper Fit Test score, the work done must be within a training heart rate zone that is 60% to 85% of the theoretical maximum heart rate (HRmax). The tables below list fit test results Life Fitness developed this rating scale based on VO 2 max percentile distributions referenced in American College of Sports Medicine's Guidelines for Exercise Testing and Prescription (8th E. 2010). It is designed to provide a qualitative description of a user's VO 2 max estimation, and a means of assessing initial fitness level and tracking improvement. R ELATIVE F ITNESS C LASSIFICATION FOR M EN Estimated VO 2 Max (ml/kg/min) Per Age Category Rating 20-29 30-39 40-49 50-59 60+ Elite 55+ 52+ 51+ 47+ 43+ Excellent 53-54 50-51 49-50 45-46 41-42 Very Good 50-52 48-49 46-48 43-44 39-40 Above Average 45-49 43-47 42-45 39-42 35-38 Average 40-44 38-42 37-41 34-38 31-34 Below Average 38-39 36-37 34-36 32-33 29-30 Low 35-37 34-35 32-33 29-31 26-28 Very Low <35 <34 <32 <29 <26 R ELATIVE F ITNESS C LASSIFICATION FOR W OMEN Estimated VO 2 Max (ml/kg/min) Per Age Category Rating 20-29 30-39 40-49 50-59 60+ Elite 47+ 44+ 42+ 37+ 35+ Excellent 45-46 42-43 40-41 35-36 33-34 Very Good 43-44 40-41 38-39 33-34 31-32 Above Average 38-42 36-39 34-37 30-32 27-30 Average 33-37 31-35 30-33 26-29 24-26 Below Average 31-32 29-30 28-29 24-25 22-23 Low 28-30 27-28 25-27 22-23 20-21 Very Low <28 <27 <25 <22 <20 27

32. 5 S ERVICE M ENU 5.1 E NTERING AND U SING THE S ERVICE M ENU Managers and other authorized personnel can use the Service Menu to access diagnostics, information, maintenance, and configuration submenus. Enter this menu system by pressing and holding down the PAUSE key and pressing the CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays the words SERVICE MENU. Release the PAUSE key and press the QUICK START key. The MESSAGE CENTER then displays MANAGER CONFIG. Use the UP and DOWN arrow keys to navigate through the two Configuration Submenus: • Manager’s Configuration. See the following page for a list of Manager’s Configuration (Optional Settings). • Manufacturer’s Configuration. Note: The ENTER key cannot be used to select the Manufacturer’s Configuration submenu which contains settings that cannot be changed by the customer. S ERVICE M ENU O VERVIEW D IAGNOSTICS (S YSTEM T EST ) The Diagnostics submenu allows technicians to run systems diagnostics. Use the UP and DOWN arrow keys to navigate through the list of diagnostic utilities. Use the ENTER key to select the current navigated utility. Press the CLEAR key to exit the current diagnostic utility. Press the CLEAR key repeatedly to exit the Diagnostics Menu. Note: These tests should only be used by (or with the express instruction of) a trained Life Fitness service technician. I NFORMATION The Information submenu allows authorized personnel to view system statistics and other details. Use the UP and DOWN arrow keys to navigate through the list of diagnostic utilities and / or display information. Use the ENTER key to select the current navigated utility. Press the CLEAR key to exit the current diagnostic utility. Press the CLEAR key repeatedly to exit the Information Menu. System Statistics Software Version Main Motor Information Lift Motor Information System Errors Maintenance Information Belt / Deck Information M AINTENANCE The Maintenance submenus allow authorized personnel to log maintenance events. C ONFIGURATION Use the UP and DOWN arrow keys to navigate through the two Configuration Submenus: Manager’s Configuration and Manufacturer’s Configuration. See the next page for a list of Manager’s Configurations (Optional Settings). 31

38. 6.2 P REVENTIVE M AINTENANCE S CHEDULE ITEM WEEKLY MONTHLY QUARTERLY BI-ANNUAL ANNUAL DISPLAY CONSOLE ASSEMBLY Hardware Inspect Console Overlay Clean Inspect Accessory Cups Clean Inspect Stop Switch Clean Inspect Emergency Switch/Magnet Clean Inspect HANDLEBAR ASSEMBLY Hardware Inspect Ergo TM Front Handlebar Clean Inspect Side Hand Rails Clean Inspect Lifepulse Sensors Clean / Inspect FRAME ASSEMBLY Hardware Inspect Motor Cover Clean Vacuum / Clean Motor Electronic Compartment Inspect Drive Belt Inspect Drive Belt Anti Static Bracket Inspect Leg Levelers Inspect / Adjust Front Roller Inspect Rear Roller Inspect Side Step Area Clean Inspect GENERAL Machine Level *Inspect Striding Belt Centered Inspect Frame, Toe Guards, Endcaps Visual / Inspect * Use bubble level to inspect 37

37. 6 S ERVICE AND T ECHNICAL D ATA 6.1 P REVENTIVE M AINTENANCE T IPS The Life Fitness Treadmill is backed by the engineering excellence and reliability of Life Fitness and is one of the most rugged and trouble-free pieces of exercise equipment on the market today. Commercial Life Fitness Treadmills are among the most popular of aerobic trainers in health clubs, colleges and military facilities the world over. Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are subject to wear, as outlined below. REMARQUE: pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de déceler tout signe d'usure ou d'endommagement. N'utilisez pas l'appareil tant que les pièces défectueuses n'ont pas été réparées ou remplacées. Portez une attention toute particulière aux pièces qui s'usent, comme indiqué ci-dessous.. The following preventive maintenance tips will keep the Life Fitness Treadmill operating at peak performance: • Clean the display console and all exterior surfaces with an approved or compatible cleaner (see Life Fitness Ap- proved Cleaners) and a soft cotton cloth. • Check operation of the emergency stop system once a week. • Check the operation of the stop button once a week. • Inspect and vacuum the area directly surrounding and under the unit regularly. • Vacuum around the striding belt regularly to keep debris from accumulating. • Inspect exterior parts regularly for wear, particularly the striding belt, deck and line cord. • Check to make sure the unit is properly leveled. • Check the position (centering) of the striding belt. The optimum operating position of the striding belt is from 1.5 inches (38 mm) to 2.0 inches (51 mm) from either side of the frame. If the striding belt travels beyond this position, see How to Adjust and Tension the Striding Belt or contact Life Fitness Customer Support Services for proper alignment instructions. L IFE F ITNESS A PPROVED C LEANERS Two preferred cleaners have been approved by Life Fitness reliability experts: PureGreen 24 and Gym Wipes. Both clean- ers will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force for- mula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1. PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control. Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general disinfection purposes. Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: [email protected]). L IFE F ITNESS C OMPATIBLE C LEANERS Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior sur- faces. Use a soft cotton cloth only. Apply the cleaner to the cotton cloth before cleaning. DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equip- ment surfaces. 36

17. 3 H EART R ATE Z ONE T RAINING ® 3.1 W HY H EART R ATE Z ONE T RAINING ® E XERCISE ? Research shows that maintaining a specific heart rate while exercising is the optimal way to monitor the intensity of a workout and to achieve maximum results. That is the idea behind the Life Fitness Heart Rate Zone Training® approach to exercise. Zone Training identifies an exerciser's ideal heart rate range, or zone, for burning fat or increasing cardiovascular fitness. The zone is a percentage of the theoretical maximum(HRmax), and its value depends on the workout. The maximal heart rate formula is defined by the American College of Sports Medicine's "Guidelines for Exercise Testing and Prescription", 8th Edition, 2010. HRmax equals to 206.9 minus the total of 0.67 multiplied by a person’s age. The Life Fitness Treadmill features five exclusive workouts designed to take full advantage of the benefits of Heart Rate Zone Training+ exercise: • FAT BURN • HEART RATE HILL TM • EXTREME HEART RATE TM • CARDIO • HEART RATE INTERVAL TM Each workout offers different benefits, as discussed in Section 4 The Workouts . Note: Consulting a fitness trainer is recommended for defining specific fitness goals and designing a workout program. To change the target heart rate during a workout, simply enter a new target heart rate using the NUMERIC keypad. To switch between programs during a workout, use the WORKOUT SELECTION keys. The Heart Rate Zone Training® workout programs measure heart rate. Wear the optional Polar® telemetry heart rate chest strap, or grip the Lifepulse TM sensors, to enable the treadmill’s on-board computer to monitor the heart rate during a workout. The computer automatically adjusts the incline level to maintain the target heart rate based on the actual heart rate. HR Max = 206.9 - (0.67 * age) Note: Reference the above chart for Theoretical Maximum Heart Rates and Target Heart Rates. Age Theoretical Maximum Heart Rate 65% (Fat Burn) 80% (Cardio) 10 200 130 160 20 194 126 155 30 187 121 149 40 180 117 144 50 173 113 139 60 167 108 133 70 160 104 128 80 153 100 123 90 147 95 117 99 141 91 112 16

30. 4.4 M AXIMIZING W ORKOUTS ON A L IFE F ITNESS T READMILL S ELECTING A L EVEL The steps for setting up a HILL, RANDOM, SPORT TRAINING 5K, and SPORT TRAINING 10K workout include select- ing a level. The word “level” refers to a range of incline percentages. The treadmill features 20 levels, with Level 1 having the lowest average incline grade and Level 20 having the highest. Within each level are seven incline percentages, or hills. During a workout, each hill appears in the WORKOUT PROFILE window as rows of light stacked in a column. The number of lit rows within a column corresponds to an incline percentage. For example, in Level 5 the lowest incline is 0.0% and is represented as one lit row. The highest incline, 4.3%, is repre- sented by a column with all seven rows lit. In the HILL and RANDOM workouts, these varying hills occur for equal durations, as discussed in the HILL workout de- scription. When the workout program brings up a new hill, the incline percentage changes automatically to match that hill. To change levels during a workout, use the arrow keys or the NUMERIC KEYPAD. U SING I NSTA P ACE TM F EEDBACK The InstaPace TM Feedback feature enables users to monitor their pace, or rate of minutes per mile, while running on the treadmill. This feature must be enabled in the Manager’s Configuration. See Section 5 for more information. The MES- SAGE CENTER displays the MPH and pace simultaneously when the user adjusts the treadmill speed with the arrow keys. If the user adjusts the speed using the NUMERIC keypad, the MESSAGE CENTER displays the pace after the treadmill reaches the new speed. U SING Z ER O UT TM S PEED C ONTROL If during a workout, a user decreases the speed to the minimum and continues to hold the DECREASE SPEED arrow, the speed falls to 0 mph which is pause mode. The minimum speed is 0.5 mph, unless changed in the Manager’s Configura- tion. See Section 5 for more information. Level % Incline 1 0.0 - 1.5 2 0.0 - 2.2 3 0.0 - 2.9 4 0.0 - 3.6 5 0.0 - 4.3 6 0.0 - 5.0 7 0.0 - 5.7 8 0.0 - 6.4 9 0.5 - 7.1 10 1.5 - 7.8 11 2.0 - 8.5 12 3.0 - 9.2 13 3.5 - 9.9 14 5.0 - 10.6 15 5.5 - 11.3 16 6.5 - 12.0 17 7.0 - 12.7 18 8.0 - 13.4 19 8.7 - 14.1 20 9.0 - 15.0 29

47. T ENSIONING AN E XISTING S TRIDING B ELT 1. Enter the MANUAL workout and operate the treadmill for five minutes at 5.0 mph (8.0 kph). Note: DO NOT RUN OR WALK ON BELT . 2. Reduce the speed to 2.0 mph (3.2 kph). Walk on the treadmill. Tightly grip the handrails and apply force with feet on the striding belt near the motor cover against the moving belt direction. If the belt slips, continue to Step 3. If it does not slip, the tension is correct. 3. Using the STOP key, stop the treadmill. Turn the belt tensioning bolts a quarter-turn clockwise for each side. 4. Repeat STEPS 2 and 3 until the belt no longer slips. Do not exceed one full turn (four quarter turns) per side when adjusting the belt tensioning bolts. 5. Enter the MANUAL workout, and operate the treadmill at 2.0 mph (3.2 kph) and check to insure proper tracking. If the striding belt drifts to the left or right see Tracking (Centering) A Striding Belt on the previous page. Do not over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction. 6.7 P ROACTIVE B ELT W EAR N OTIFICATION The treadmill proactively notifies the facility manager about belt wear through diagnostics. A single indicator is lit on the treadmill console (if manager-enabled) when a belt check is required. This indicator light is located in the upper left corner of the workout profile window. • Automatic belt check reminder at 30,000 miles (48,000 km) • Notification based on “Unable to Attain Target Speed” errors for specific user weights/speeds. T O CHECK FOR NOTIFICATIONS : To enter Belt/Deck Info, press and hold the PAUSE key and press the CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays the words “SERVICE MENU”. Use the TIME UP and DOWN arrow keys to navigate to the INFORMATION Menu. Then access the “Belt / Deck Information” submenu. Note: Notifications are automatically cleared once they have been displayed. 6.8 H OW TO O BTAIN P RODUCT S ERVICE / S ERIAL N UMBER L OCATION 1. Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and its features and workouts. 2. Locate and write down the serial number of the unit which is located on the back of the unit near the toe guard as well as under the left rear endcap. 3. Contact LIfe Fitness Customer Support Services . Remove plastic shroud to find large serial label location. Small Serial Label Large Serial Label 46

11. H OW TO P OSITION AND S TABILIZE THE L IFE F ITNESS T READMILL Follow all safety instructions in Section 1.1 and move the treadmill to the location in which it will be used. See Section 7 for the dimensions of the product footprint (assembled dimensions). S AFETY C LEARANCES The following information is supplied as regional reference data regarding safety clearances around the exterior of the treadmill. • EU: The European EN957 Safety Standard requires a 2 meter (6.5 feet) minimum from the rear of the treadmill to any object or surface. • U.S. and other regions: The ASTM International (ASTM ) F2115 - 05 Standard recommends the minimum dimensions to be 0.5 meter (1.64 feet) on each side of the treadmill and 1 meter (3 feet) behind the rearward most portion of the usable moving surface or 2 meters (6.5 feet) behind the furthest rearward obstruction to emergency egress from the treadmill. After placing the unit where it will be used, check its stability. If there is even a slight rocking motion or the unit is not stable, determine which stabilizing leg is not resting on the floor. To adjust, loosen the JAM NUT (A), and turn the STABILIZING LEG (B) until the rocking motion ceases, and both stabilizing legs rest firmly on the floor. Retighten the JAM NUT. Note: It is extremely important that the stabilizing leg be correctly adjusted for proper operation. An unbalanced unit may cause striding belt misalignment. A bubble level is recommended to ensure proper leveling. P OWER S WITCH Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions: "I" (one) for ON and "0" (zero) for OFF. C ENTERING THE B ELT After installing and levelling the treadmill, check the belt to ensure that it is tracking properly. First, plug the power cord into an appropriate outlet. See Electrical Power Requirements at the beginning of this section for details. Then turn the treadmill ON. Have one person stand on the platforms on either side of the treadmill frame. Do not stand on the belt at this time. Press the QUICK START key, and increase the speed to 4.0 miles per hour (MPH), or 6.4 kilometers per hour (KPH), using the SPEED UP arrow. If the striding belt moves to the right while it is running, have a second person turn the right tension bolt a quarter-turn clockwise, and then turn the left tension bolt (C) a quarter-turn counter-clockwise. See the illustration below. This action sets the striding belt tracking back to center of the roller. If the striding belt moves to the left, turn the left tension bolt a quarter-turn clockwise and then turn the right tension bol t a quarter-turn counter-clockwise to start the striding belt tracking back to center of roller. Repeat these adjustments until striding belt appears centered. Allow the belt to continue running for several minutes to be sure that the tracking is stabilized. Note: Do not exceed one full turn of the adjusting screws in either direction. If, after one full turn, the belt does not track properly, contact Life Fitness Customer Support Services. C 10

12. F ITNESS N ETWORKING The two interchangeable type RJ45 networking ports (D) are located on the back of the display console. These network ports, located behind the display console rear access door, allow the treadmill to be connected to a fitness entertainment system and/or a fitness network such as FitLinxx ® . • Networking: The built-in networking ports allow the unit to exchange workout information with a fitness network database. • Fitness Entertainment: The network connection enables the console to power a third- party receiver for use with a service such as the Cardio Theater ® entertainment system or the BroadcastVision TM entertainment system. P OWER C ORD R OUTING The power cord can be run straight from the treadmill, shortened and exited out the user-front left side, or run under the frame using the power cord clips and exited out the user right-rear side of the treadmill. For efficient cord management, the following routing options are recommended: With the power cord unplugged, insert the clips in the appropriate holes. See the illustration below. Use Hole Pattern 1 or 2 to locate the clips and secure the power cord with the clips, taking up any slack between clips. Note: It may be necessary to tip the treadmill to route the power cord properly. To plug the power cord into an outlet in front of the treadmill, use Hole Pattern 1 for outlets located at the front of the machine. Note: To accommodate treadmill incline, at least two feet (24”) of power cord is required between the outlet and the last power cord clip for outlets in front of the treadmill. To plug the power cord into an outlet in rear of the treadmill, use Hole Pattern 2 for outlets located at the rear of the machine. WARNING: Make sure that there is a 6.5 foot clearance behind the treadmill. Contact Life Fitness Customer Support Services for an optional longer power cord if necessary . WARNING: Insure that the power cord (A) does not contact the striding belt or get pinched between the frame (C), lift arm (B) or the wheel. Failure to follow this warning may result in serious injury. AVERTISSEMENT : S'assurer que le cordon d'alimentation n'entre pas en contact avec le tapis et ne soit pas pincé entre le cadre, le bras de levage ou la roue. Le non-respect de cet avertissement peut provoquer de graves blessures. Note: When using Pattern 1, it is extremely important to route the power cord BETWEEN the lift frame and the main frame. 11 D

23. C USTOM W ORKOUTS The treadmill console stores up to six custom workouts. These workouts are created by fitness club managers or other authorized personnel. For information on creating these workouts, see Programming Custom Workouts in Section 5. To use custom workouts, press the PERSONAL TRAINER button repeatedly until the MESSAGE CENTER displays “PERSONAL TRAINER WORKOUTS”. Then, press ENTER. The MESSAGE CENTER displays a prompt to select a cus- tom workout number, ranging from 1 to 6. Using the arrow keys or the NUMERIC KEYPAD, select the number and press ENTER. If a workout has not been created for that number, the MESSAGE CENTER simply scrolls to the next number. If a workout has been created for the selected number, the MESSAGE CENTER displays successive prompts to enter either the weight or age, depending on the custom program, and choose a speed. After these entries are provided, the workout begins. C ALORIES G OAL This workout is designed to promote weight loss and weight control. The objective is to burn a certain number of calories in the selected time duration. Once the objective is met, the workout automatically goes into a cool down phase and ends afterward. D ISTANCE G OAL This workout is designed to build endurance. The objective is to cover a certain distance in miles. Once the objective is met, the workout automatically goes into a cool-down phase and ends afterward. Note: When a user sets this goal with the TIME arrow keys, the console displays the values in 0.10-mile increments. T IME IN Z ONE G OAL The Time in Zone Goal program, a feature of Heart Rate Zone Training®, enhances FAT BURN and CARDIO workouts by setting a duration for staying within the target zone as the workout goal. Once the duration objective is met, the workout goes into a cool-down phase. S PORT T RAINING TM This distance-goal workout is designed for runners training for races. The program creates realistic terrains by setting dif- ferent incline levels throughout the course. Incline grades depend on the difficulty levels selected during the workout setup. A 1.5% incline grade, which is the baseline level, simulates a flat running surface. A zero percent grade simulates running downhill. Incline durations range between 30 and 60 seconds. The course ends when the distance goal is met. Two Sport Training TM programs are available on the treadmill: • SPORT TRAINING TM (5K) is a 5-kilometer or 3.1-mile course. • SPORT TRAINING TM (10K) is a 10-kilometer or 6.2-mile course. 22

22. H ILL The Life Fitness-patented HILL workout offers a variety of configurations for interval training. Intervals are periods of in- tense cardiovascular exercise separated by regular periods of lower-intensity exercise. The WORKOUT PROFILE window represents these high and low intervals as columns of illuminated LEDs, which together have the appearance of hills and valleys. The computerized interval training workout has been scientifically demonstrated to promote greater cardiorespira- tory improvement than steady-pace training. The HILL workout goes through four phases, each marked by different intensity levels. The WORKOUT PROFILE window displays the progress of these phases. As noted in the descriptions below, the heart rate should be measured at two stages in the workout to gauge its effectiveness. Wear the Polar telemetry heart rate chest strap or continuously grip the Lifepulse TM handles. The MESSAGE CENTER does not display a request for a heart rate measurement, as it does with CARDIO, FAT BURN and the HEART RATE ZONE TRAINING programs. 1. Warm-up is a phase of low, gradually rising resistance, which brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles. 2. Plateau increases the intensity slightly and keeps it steady, to bring the heart rate to the low end of the target zone. Check the heart rate at the end of this phase. 3. Interval Training is a series of increasingly steeper hills alternating with valleys or stints of recovery. The heart rate should rise to the high end of the target zone. Check the heart rate at the end of this phase. 4. Cool Down is a low-intensity phase that allows the body to begin removing lactic acid and other exercise by-products which build up in muscles and contribute to soreness. Each column, as seen in the WORKOUT PROFILE WINDOW and the chart above, represents one interval. The overall duration of the workout determines the length of each interval. Each workout is made up of 20 intervals, so the duration of each interval is equal to the duration of the entire workout divided by 20. 1 to 9 minutes: A workout with a duration of less than 10 minutes is insufficient for the HILL program to complete all four phases adequately. The program therefore condenses a workout of this duration at various stages. 10 to 19 minutes: The interval durations initially are set at 30 seconds for a 10-minute workout. For every minute over 10, each interval increases by three seconds. A 15-minute workout consists of 20 intervals at 45 seconds each. 20 to 99 minutes: All intervals last 60 seconds. If the user adds minutes to the pre-set duration while the workout is in progress, the program adds hills and valleys that are identical to the first eight intervals of the Interval Training phase. Th is pattern repeats until the workout is completed. 21

15. J. HEADPHONE JACK: Headphones must be plugged into the treadmill to access the sound for the iPod, TV, or audio compatible entertainment device. The jack is not a user-replaceable feature. Contact Life Fitness Customer Support Services for more information. K. iPOD HOLDER: Users can attach an iPod via a 30-pin connector. Use iPod/TV controls to play, or controls on the iPod itself to select a song or video and begin playing. Note: If a Life Fitness Attachable TV is not connected, users can view videos on the iPod. L. iPOD / TV KEYPAD: The keys are used to provide control of the optional entertainment systems (such as a Life Fitness Attachable TV, iPod, and Cardio Theater). These keys are NOT used for workout programs. I P OD / TV K EYPAD M. NUMERIC keys: Press these keys to enter channels (TV/CSAFE). N. CC: Use this key to enable the Closed Caption Choice (TV/CSAFE). O. DIGITAL TV TUNER SUB-CHANNEL ENTRY key (-): Use this key to enter Digital TV channels. P. ENTER: Use this key to enter entertainment selections. Q. LAST: Press this key to see the last channel viewed (TV only). R. MUTE: Press this key to turn off the sound (Current Selected Source). S. TV/ iPOD SOURCE: Use this key to select TV, iPod, or optional AUX (auxillary) audio source. T. POWER: Use this key to turn the power On and Off (TV only). U. PLAY / PAUSE: Use this key to Play or Pause the current track (iPod only). V. LEFT and RIGHT ARROW keys: Use these keys to adjust the volume up and down (Current Selected Source). W. UP and DOWN ARROW keys: Use these keys to change channels (TV). Use these keys to select the next track and previous Track (iPod). iPod i P o d ® / TV T V O S R Q N P U M V W T 14

21. 4.3 W ORKOUT D ESCRIPTIONS Q UICK S TART QUICK START is the fastest way to begin exercising. After the QUICK START key is pressed, a MANUAL workout begins. For accurate caloric expenditure, enter weight using the ENTER WEIGHT button. The incline level is set to zero by de- fault. Change the level using the INCLINE arrow key. Change the speed using the SPEED key, up or down as desired, or use the NUMERIC keypad to enter a new speed value. M ANUAL The MANUAL program is a constant effort workout in which the user can change incline level or speed at any time. R ANDOM The RANDOM program creates a terrain of hills and valleys that varies with each workout. More than one million different patterns are possible. F AT B URN The FAT BURN workout is designed to maintain a user’s heart rate at 65% of the theoretical maximum(HRmax) for opti- mal results. Throughout the workout, the user wears a Polar telemetry heart rate chest strap or grasps the Lifepulse TM sensors. If the user is not wearing a Polar telemetry heart rate chest strap, the WORKOUT PROFILE WINDOW displays a heart shape, and the MESSAGE CENTER displays a prompt to grasp the sensors. The console continuously monitors and displays the heart rate, adjusting the intensity level of the treadmill to reach and maintain the target. This system elim- inates over-training and under-training, and it maximizes the aerobic benefits of exercise by using the body's fat stores for fuel. Note: The intensity level is changed by incline. Speed can only be changed by the user. C ARDIO The CARDIO workout is virtually identical to FAT BURN , however the target heart rate is calculated at 80% of the theoret- ical maximum (HRmax). The higher target promotes cardiovascular improvement by placing a heavier workload on the heart muscle. Note: The intensity level is changed by incline. Speed can only be changed by the user. Note: Change the target heart rate at any time by using the NUMERIC KEYPAD. 20

29. F ITNESS T ESTS The Life Fitness Treadmill features fitness tests based upon specific predefined protocols. • ARMY PFT : 2.0 miles The U.S. Army Physical Fitness Test is a physical performance test used to assess muscular endurance and cardiorespiratory fitness. • NAVY PRT : 1.5 miles The running portion of the U.S. Navy Physical Readiness Test is a distance goal test based on the time needed to complete the required distance and is used by the U.S. Navy and Naval academies to measure aerobic capacity. • MARINES PFT : 3.0 miles The U.S. Marines Physical Fitness Test is a physical performance test used to assess muscular endurance and cardiorespiratory fitness. • AIR FORCE PRT : 1.5 miles The U.S. Air Force Physical Readiness Test is a physical performance test used to assess muscular endurance and cardiorespiratory fitness. • WFI Submax Protocol: Submaximal VO 2 The WFI Submax Protocol is a graded submax assessment used to predict a fire fighter’s aerobic capacity. This test automatically increases speed and incline until a target heart rate is reached. This assessment replaces the Gerkin assessment. • PHYSICAL EFFICIENCY BATTERY : 1.5 miles The Physical Efficiency Battery is used by U.S. Federal Law Enforcement, U.S. Federal Bureau of Investigation, and other federal organizations for the hiring and maintenance of federal jobs. Scores for these tests are based on finishing time, age, and gender. To set up one of these tests, press the FIT TEST key repeatedly until the MESSAGE CENTER displays the name of the desired test, then press ENTER. If the selected test is either the NAVY or MARINES test, the MESSAGE CENTER dis- plays a question as to whether or not the test is taking place below a certain altitude. For the NAVY test, the altitude is 5,000 feet above sea level; and for the MARINES test, the altitude is 4,500 feet above sea level. Press 1 for YES and 2 for NO then press Enter. At the MESSAGE CENTER prompts, enter the weight, age, gender, and desired speed, using the arrow keys or the NU- MERIC KEYPAD. Press ENTER after each entry. Then, begin the workout. To ensure an accurate test score, do not change these entries once the workout begins. For all FITNESS TESTS except WFI SUBMAX PROTOCOL, after the distance goal is reached, the workout program goes into a cool down. The duration of this phase depends on the amount of time taken to complete the test. For less than five minutes, the cool down is one minute. For five to fifteen minutes, the cool down is three minutes. For longer times, the cool down is five minutes. The user can abort the cool down by pressing the STOP button or the CLEAR key. After the cool down is aborted or completed, the MESSAGE CENTER displays the finishing time and a point score for the PEB, Army, and Marines tests; or a qualitative score, such as EXCELLENT, for the Navy test. For the WFI SUBMAX PROTOCOL , once the target heart rate has been exceeded for 15 seconds, the program goes into a cool down. The cool down last for three minutes at 3 mph at a 0% grade. The workout summary includes the following information: • The test time is displayed in the TIME window. • The VO 2 max test score is displayed in the SPEED window. • The recovery heart rate is displayed in the HEART RATE window. S PEED I NTERVAL This program allows the user to toggle between user defined JOG and RUN speeds. The SPEED INTERVAL button will flash throughout the workout. The user can toggle the speeds at any time during the workout by pressing the speed interval button. The current speed will appear in the speed display window. The preset JOG and RUN speeds cannot be changed during a workout. The speed can be adjusted at any time during a workout using the SPEED arrow keys. Toggling the JOG and RUN speeds using the SPEED INTERVAL button will reset the speeds to the preset JOG and RUN speeds. 28

20. 4.2 U SING THE W ORKOUTS Select a workout or log on to a fitness network exercise database. See Section 4.5 Logging on to the Network for details. The chart below lists the steps for setting up each workout. Use the NUMERIC keypad to enter the values when prompted by the MESSAGE CENTER, or use TIME, INCLINE, or SPEED arrow keys to scroll to desired values displayed on the MESSAGE CENTER. Press ENTER to confirm each selection. These entered values can be changed during all workouts, except for those found under the FIT TEST button. QUICK START Press QUICK START Begin workout MANUAL Press MANUAL Enter weight Enter time Enter incline Enter speed Begin workout RANDOM Press RANDOM Enter weight Enter time Enter level Enter speed Begin workout FAT BURN Press FAT BURN Enter weight Enter time Enter age Enter target heart rate Enter speed Begin workout CARDIO Press CARDIO Enter weight Enter time Enter age Enter target heart rate Enter speed Begin workout HILL Press HILL Enter weight Enter time Enter level Enter speed Begin workout PERSONAL TRAINER WORKOUTS Press PERSONAL TRAINER repeatedly until PERSONAL TRAINER WORKOUTS appears; press ENTER Select the desired workout number, from 1 to 6; press ENTER Begin workout CALORIES GOAL Press PERSONAL TRAINER repeatedly until CALORIES GOAL appears; press ENTER Enter weight Enter calories Enter incline Enter speed Begin workout DISTANCE GOAL Press PERSONAL TRAINER repeatedly until DISTANCE GOAL appears; press ENTER Enter weight Enter distance Enter incline Enter speed Begin workout TIME IN ZONE GOAL Press PERSONAL TRAINER repeatedly until TIME IN ZONE GOAL appears; press ENTER Enter weight Enter time Select Fat Burn or Cardio Enter age Enter target heart rate Enter speed Begin workout SPORT TRAINING TM Press PERSONAL TRAINER repeatedly until SPORT TRAINING 5K or SPORT TRAINING 10K appears; press ENTER Enter weight Enter level Enter speed Begin workout HEART RATE HILL TM Press ZONE TRAINING+ repeatedly until HEART RATE HILL appears; press ENTER Enter weight Enter time Enter age Enter target heart rate Enter speed Begin workout HEART RATE INTERVAL TM Press ZONE TRAINING+ repeatedly until HEART RATE INTERVAL appears; press ENTER Enter weight Enter time Enter age Enter target heart rate Enter speed Begin workout EXTREME HEART RATE TM Press ZONE TRAINING+ repeatedly until EXTREME HEART RATE appears; press ENTER Enter weight Enter time Enter age Enter target heart rate Enter walk speed Enter jog speed Begin workout LIFE FITNESS FIT TEST Press FIT TEST repeatedly until FIT TEST = 5 MIN appears; press ENTER Enter weight Enter age Enter gender Enter speed Begin workout ARMY PFT Press FIT TEST repeatedly until ARMY PFT appears; press ENTER Enter weight Enter age Enter gender Enter speed Begin 2.0 mile test NAVY PRT Press FIT TEST repeatedly until NAVY PRT appears; press ENTER Enter YES or NO to question: IS ELEVATION LESS THAN 5000 FEET ABOVE SEA LEVEL? Enter weight Enter age Enter gender Enter speed Begin 1.5 mile test MARINES PFT Press FIT TEST repeatedly until MARINE PFT appears; press ENTER Enter YES or NO to question: IS ELEVATION LESS THAN 4500 FEET ABOVE SEA LEVEL? Enter weight Enter gender Enter speed Begin 3.0 mile test AIR FORCE PRT Press FIT TEST repeatedly until AIR FORCE PRT appears; press ENTER Enter weight Enter age Enter gender Enter speed Begin 1.5 mile test WFI SUBMAX PROTOCOL Press FIT TEST repeat- edly until WFI SUBMAX PROTOCOL appears; press ENTER Enter weight Enter height Enter age Begin 3-minute warmup Begin test PEB TEST Press FIT TEST repeatedly until PEB TEST appears; press ENTER Enter weight Enter age Enter gender Enter speed Begin test SPEED INTERVAL Press SPEED INTERVAL Enter weight Enter time Enter incline Enter jog speed Enter run speed 19

19. 4 T HE W ORKOUTS 4.1 W ORKOUT O VERVIEWS The following workouts are pre-programmed for the Life Fitness Treadmill. QUICK START is the fastest way to begin exercising. After the QUICK START key is pressed, a MANUAL workout begins immediately. MANUAL is a constant effort workout in which the user can change incline level or speed at any time. RANDOM is an interval training workout of constantly changing intensity levels that occur in no regular pattern or progression. HILL is an interval training workout. Intervals are periods of intense aerobic exercise separated by regular periods of lower-intensity exercise. SPEED INTERVAL enables the user to toggle between two chosen speeds with the touch of a single button. SPORT TRAINING TM (5K) is a distance-goal workout that simulates an actual terrain with varying incline levels. It is designed to assist runners in training for a 5-kilometer, or 3.1-mile, race. This is accessible through the PERSONAL TRAINER workouts button. SPORT TRAINING TM (10K) is a distance-goal workout that simulates an actual terrain with varying incline levels. It is designed to assist runners in training for a 10-kilometer, or 6.2-mile, race. This is accessible through the PERSONAL TRAINER workouts button. PERSONAL TRAINER workouts are accessed through the PERSONAL TRAINER key. These include the pre-pro- grammed DISTANCE GOAL, CALORIES GOAL, and TIME IN ZONE GOAL workouts, as well as up to six custom work- outs, which may be programmed by a fitness club manager or other authorized staff. HEART RATE HILL TM takes the user through three different hills based on the target heart rate. The user wears a Polar telemetry heart rate chest strap or grasps the Lifepulse TM sensors continuously. HEART RATE INTERVAL TM alternates between a hill and a valley based on the target heart rate. The user wears a Polar telemetry heart rate chest strap or grasps the Lifepulse TM sensors continuously. EXTREME HEART RATE TM is an intense workout for more experienced users. It is designed to get the heart rate up and down as quickly as possible. The user wears a Polar telemetry heart rate chest strap or grasps the Lifepulse TM sensors continuously. FAT BURN is a low-intensity workout for burning a higher percentage of calories from fat. The user wears a Polar teleme- try heart rate chest strap, or grasps the Lifepulse TM sensors continuously. The program adjusts the intensity level through changing the incline (elevation), based on the actual heart rate, to maintain the rate at 65%of the theoretical maximum. CARDIO is a higher intensity workout for more fit users, maximizing cardiovascular benefits and total calories burned. The user wears a Polar telemetry heart rate chest strap or grasps the Lifepulse TM sensors continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80% of the theoretical maximum. FITNESS TESTS LIFE FITNESS FIT TEST estimates cardiovascular fitness and can be used to monitor improvements in endurance every 4-6 weeks. ADDITIONAL FITNESS TESTS are similar to the FIT TEST workout, except these programs are based upon specific predefined protocols. The available tests are: • ARMY PHYSICAL FITNESS TEST (PFT) - (U.S. MILITARY) • NAVY PHYSICAL READINESS TEST (PRT) - (U.S. MILITARY) • MARINES PHYSICAL FITNESS TEST (PFT) - (U.S. MILITARY) • AIR FORCE FITNESS TEST (PRT) - (U.S. MILITARY) • WFI SUBMAX PROTOCOL - (INTERNATIONAL ASSOCIATION OF FIRE FIGHTERS) • PHYSICAL EFFICIENCY BATTERY (PEB) - (U.S. FEDERAL LAW ENFORCEMENT) 18

2. A MERICAS North America Life Fitness Inc. 5100 N River Road Schiller Park, IL 60176 U.S.A Telephone: (847) 288 3300 Fax: (847) 288 3703 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 7:00 am - 6:00 pm (CST) Brazil Life Fitness Brasil Av. Cidade Jardim, 900 Jd. Paulistano São Paulo, SP 01454-000 BRAZIL SAC: 0800 773 8282 Telephone: +55 (11) 3095 5200 Fax: +55 (11) 3095 5201 Service Email: [email protected] Sales/Marketing Email: [email protected] Service Operating Hours: 9:00 - 17:00 (BRT) (Monday-Friday) Store Operating Hours: 9:00 - 20:00 (BRT) (Monday-Friday) 10:00 - 16:00 (BRT) (Saturday) Latin America & Caribbean* Life Fitness Inc. 5100 N River Road Schiller Park, IL 60176 U.S.A Telephone: (847) 288 3300 Fax: (847) 288 3703 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 7:00am-6:00pm (CST) E UROPE , M IDDLE E AST , & A FRICA (EMEA) Netherlands & Luxemburg Life Fitness Atlantic BV Bijdorpplein 25-31 2992 LB Barendrecht THE NETHERLANDS Telephone: (+31) 180 646 666 Fax: (+31) 180 646 699 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h-17.00h (CET) United Kingdom & Ireland Life Fitness UK LTD Queen Adelaide Ely, Cambs, CB7 4UB Telephone: General Office (+44) 1353.666017 Customer Support (+44) 1353.665507 Fax: (+44) 1353.666018 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: General Office: 9.00am - 5.00pm (GMT) Customer Support: 8.30am - 5.00pm (GMT) Germany & Switzerland Life Fitness Europe GMBH Siemensstraße 3 85716 Unterschleißheim GERMANY Telephone: (+49) 89.31 77 51.0 (Germany) (+41) 0848 000 901 (Switzerland) Fax: (+49) 89.31 77 51.99 (Germany) (+41) 043 818 07 20 (Switzerland) Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 08.30 -16.30h (CET) Austria Life Fitness Austria Vertriebs G.m.b.H. Dückegasse 7-9/3/36 1220 Vienna AUSTRIA Telephone: (+43) 1.61.57.198 Fax: (+43) 1.61.57.198.20 Service Email: [email protected] Marketing/Sales Email: [email protected] Operating Hours: 9.00h-17.00h (MEZ) Spain Life Fitness IBERIA C/Frederic Mompou 5,1º1ª 08960 Sant Just Desvern Barcelona SPAIN Telephone: (+34) 93.672.4660 Fax: (+34) 93.672.4670 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h-18.00h (Monday-Thursday) 8.30h-15.00h (Friday) Belgium Life Fitness Benelux NV Parc Industrial de Petit-Rechain 4800 Verviers BELGIUM Telephone: (+32) 87 300 942 Fax: (+32) 87 300 943 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h -17.00h (CET) Italy Life Fitness Europe GmbH Siemensstraße 3 85716 Unterschleißheim GERMANY Telephone: (+39) 02-55378611 Service: 800438836 (In Italy) Fax: (+39) 02-55378699 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 08:30 - 16:30h (CET) All Other EMEA countries & distributor business C-EMEA* Bijdorpplein 25-31 2992 LB Barendrecht THE NETHERLANDS Telephone: (+31) 180 646 644 Fax: (+31) 180 646 699 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h-17.00h (CET) A SIA P ACIFIC (AP) Japan Life Fitness Japan Nippon Brunswick Bldg., #8F 5-27-7 Sendagaya Shibuya-Ku, Tokyo Japan 151-0051 Telephone: (+81) 3.3359.4309 Fax: (+81) 3.3359.4307 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h-17.00h (JAPAN) China and Hong Kong Life Fitness Asia Pacific LTD Room 2610, Miramar Tower 132 Nathan Road Tsimshatsui, Kowloon HONG KONG Telephone: (+852) 2891.6677 Fax: (+852) 2575.6001 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h-18.00h All Other Asia Pacific countries & distributor business Asia Pacific* Room 2610, Miramar Tower 132 Nathan Road Tsimshatsui, Kowloon HONG KONG Telephone: (+852) 2891.6677 Fax: (+852) 2575.6001 Service Email: [email protected] Sales/Marketing Email: [email protected] Operating Hours: 9.00h-18.00h C ORPORATE H EADQUARTERS 5100 River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • FAX: 847.288.3703 800.735.3867 (Toll-free within U.S.A., Canada) Global Website: www.lifefitness.com I NTERNATIONAL O FFICES * Also check www.lifefitness.com for local representation or distributor/dealer. 1

49. 7.2 W ARRANTY I NFORMATION W ARRANTY C OVERAGE : CLST T READMILL NOTE - Once any commercial product is placed in a private residence (home), it automatically becomes covered under that product category's consumer warranty. Warranty coverage begins at the original date of sale. WHAT IS COVERED: This Life Fitness commercial exercise equipment (“Product”) is warranted to be free of all defects in material and workmanship. WHO IS COVERED: The original purchaser or any person receiving the Product as a gift from the original purchaser. HOW LONG IS IT COVERED: All coverage is provided by specific Product according to the guidelines listed on the chart accompanying this warranty card. WHO PAYS TRANSPORTATION & INSURANCE FOR SERVICE: If the Product or any covered part must be returned to a service facility for re- pairs, We, Life Fitness , will pay all transportation and insurance charges for the first year. You are responsible for transportation and insurance charges during the second and third years (if applicable). WHAT WE WILL DO TO CORRECT COVERED DEFECTS: We will ship to you any new or rebuilt replacement part or component, or, at our option, replace the Product. Such replacement parts are warranted for the re- maining portion of the original warranty period. WHAT IS NOT COVERED: Any failures or damage caused by unauthorized service, misuse, accident, neg- ligence, improper assembly or installation, debris resulting from any construction activities in the Product’s environment, rust or corrosion as a result of the Prod- uct’s location, alterations or modifications without our written authorization or by failure on your part to use, operate and maintain the Product as set out in your Operation Manual (“Manual”) . Two type RJ45 interchangeable Network ready and Fitness Entertainment ports are supplied with the Product. These ports comply with the FitLinxx CSAFE specification dated August 4, 2004 stating: 4.75VDC to 10VDC; maximum cur- rent of 85mA. Any Product damage caused by a load exceeding this FitLinxx CSAFE specification is not covered by warranty. All terms of this warranty are void if this product is moved beyond the continental borders of the United States of America (excluding Alaska, Hawaii and Canada) and are then subject to the terms provided by that country’s local authorized Life Fitness representative. WHAT YOU MUST DO: Retain proof of purchase (our receipt of the attached registration card assures registration of purchase information but is not required) ; use, operate and maintain the Product as specified in the Manual; notify Customer Support Services of any defect within 10 days after discovery of the defect; if instructed, return any defective part for replacement or, if necessary, the entire Product for repair. OPERATION MANUAL: It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to perform the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction. HOW TO GET REPLACEMENT PARTS & SERVICE: Simply call Customer Support Services at (800) 351–3737 or (847) 451–0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your product (refer to page 1 for Customer Services contact information). They will tell you how to get a replacement part, or, if necessary, arrange for service where your product is located or advise you on how and where to ship the product for service. Before shipping: 1. obtain a R eturn A uthorization Number ( RA# ) from Customer Support Serv- ices 2. securely pack your console (use the original shipping carton, if possible) 3. write the RA# on the outside of the carton 4. insure the console, and 5. include a letter explaining the defect or problem and a copy of your proof of purchase if you believe the service is covered by warranty EXCLUSIVE WARRANTY: THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIM- ITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABIL- ITIES ON OUR PART. We neither assume nor authorize any person to assure for us any other obligation or liability concerning the sale of this Product. Under no circumstances shall we be liable under this warranty, or otherwise, of any damage to any person or property, including any lost profits or lost savings, for any special, indirect, secondary, incidental or consequential damages of any na- ture arising out of the use of or inability to use this Product. Some states do not allow the exclusion or limitation of implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions may not apply to you. CHANGES IN WARRANTY NOT AUTHORIZED: No one is authorized to change, modify or extend the terms of this limited war- ranty. EFFECT OF STATE LAWS: This warranty gives you specific legal rights and you may have other rights which vary from state to state. OUR PLEDGE TO YOU: Our Products are designed and manufactured to the highest standards. We want you completely satisfied with our Products and will do everything possi- ble under the terms of this warranty to keep you secure in knowing you have bought the best! MODEL CLST Treadmill 1 Year 3 Mechanical (i.e. belt and deck) 3 Electro-Mechanical (i.e. switches, lift motor, electrodes) 3 Labor 2 Years 3 Electronics (i.e. PCBs such as motor controller and console board) 6 Months 3 Console Overlay 3 Line Cord 3 Plastic Parts 7 Year 3 Lifespring TM Shock Absorbers 3 Drive Motor 3 Frame 48

Views

  • 148 Total Views
  • 102 Website Views
  • 46 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 7 www.fitness-trader.com
  • 1 fitness-trader.odoo.com
You can compare max 4 products.