0 item

Precor AMT 100i Manual Reference Assembly

Public Channel / Manuals

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

3.

31.

28.

68.

30. User's Reference Manual 100i Commercial Adaptiv e Motion Trainer

71.

80.

1. This addendum accompanies your equipment documentation and is additional information concerning the heart rate features for your equipment and console. Important The heart rate features are intended for reference only. They may not be accurate for every user or at every speed and are not intended for use as a medical device. Holding the heart rate handle touch sensor while exercising at higher intensity may also decrease accuracy of the heart rate reading and is not recommended. Please also read your product documentation and visit: www.precor.com/en-us/customer-service/faq. P/N 305324-101 rev A, ENU ©Precor Incorporated | October 2017

29. 100i POM 49735-104, en Warranty # 36286-112, en Registration Card# 45622-101, en 03 March 2008 Precor, C, CrossRamp, EFX, M, Move Beyond, and SmartR ate are registered trademar ks of Precor Incorporated. A M T, Ad a pt iv e M o ti o n Tr a i ne r, C ro s s tr a i ne r, Q ui ck St ar t, and StretchTrainer are tradem arks of Precor Incorporated. Copyright 2008 Precor Incorporated. Specifications subject to change without notice. www.precor.com NOTICE: Precor is widely recognized for its in novative, award winning designs of exer cise equipment. Pr ecor aggressively seeks U.S. and foreign patent s for both the mechanical co nstruction and the visual aspects of its product design. Any party contemplating the use of Precor’s product designs is hereby forewarned that Precor considers the unauthorized appropriation of its proprietary rights to be a very serious matter. Precor will vigorously pursue all unauthorized appropriation of its proprietary rights. Precor Incorporated 20031 142nd Ave NE P. O . B o x 72 0 2 Woodinville, WA USA 98072-4002 1-800-347-4404

81. ©2008 Precor Incorporated www.precor.com 100i AG 49736-106, en 28 March 2008 Precor Incorporated 20031 142nd Avenue NE P. O . B ox 72 0 2 Woodinville, WA USA 98072-4002

70. 100i Assembly Guide Commercial Adaptive Motion Trainer

79. 100i Commercial AMT Assembly Guide 8 Notes:

7. Product Owner's Manual: Important Safety Instructions 4 Obtaining Service You should not attempt to se rvice the equipment except for maintenance tasks described in th is manual. For information about product operation or service, see the Precor web site at www.precor.com. Should you need more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at www.precor.com/corp/contact. For future reference, write the mo del, serial number, and date of purchase for all your equipment in the space provided. The serial number is printed on a label located near the power cord connection (treadmills) or recepta cle (self-powered equipment). Model #: _______ Base Serial #: _______________________ Display Serial #: _______________________ Date purchased: _______________________ Model #: _______ Base Serial #: _______________________ Display Serial #: _______________________ Date purchased: _______________________ Model #: _______ Base Serial #: _______________________ Display Serial #: _______________________ Date purchased: _______________________ Model #: _______ Base Serial #: _______________________ Display Serial #: _______________________ Date purchased: _______________________

78. 100i Commercial AMT Assembly Guide 7 Replace the back console plate onto the display console using the four screws removed in step 4. Secure the fasteners with a Phillips-head screwdriver. Verify that the heart rate display is operational. 1. Stand on the rear pedest al and face the display. 2. Place one foot in the lower foot plate and grasp an arm or a stationary handlebar for stability wh ile you step into the other foot plate. 3. When you are comfortably situated, begin climbing. 4. Grasp both touch-sensitive handlebar grips. 5. Look at the HEART RATE display. After a few seconds, a number appears indicating your heart rate. Note: If a number does not appear in the HEART RATE display, check the 4-prong heart rate cable to make sure it is properly connected.

23. Product Owner's Manual: Maintenance 20 Storing the Chest Strap If you purchased the optional heart rate chest strap, store it in a place where it remains free of dust and dirt (for example, in a closet or drawer). Be sure to protec t the chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F (0° C). To clean the chest strap, use a sponge or soft cloth dampened in mild soap and water. Dry the surface thoroughly with a clean towel. Long-Term Storage When the equipment is not in use fo r any length of time, make sure it is turned Off (tre admill only) and the powe r cord or optional power adapter (self-powered equipment) is unplugged from its power source and is positioned so that it will not become damaged or interfere with people or other equipment.

26. We are confident that you will be pleased with your purchase and that your new Precor equipment will help satisfy your customers’ fitness needs, while helping you meet your business goals. To allow us to serve you better, please take a few moments to complete and return your warranty registration. YOU MAY ALSO REGISTER ONLINE AT www .precor .com/warranty If you have questions or need additional information, contact your local dealer or call Precor Commercial Products Customer Support at 888-665-4404. Thank You and Welcome to Precor Precor Incorporated 20031 142nd Avenue NE PO Box 7202 Woodinville, WA 98072-4002 PLACE STAMP HERE Fold along dotted line and tape closed before mailing. COMM.

35. User's Reference Manual: AMT Features 4 Self-Powered Features The equipment does not require an electrical power connection. It has an internal battery that is r echarged every time you exercise for a reasonable period of time. Meet ing the minimum requirements for operation causes the Precor banner to appear. You can press QUICKSTART or select a program to begin exercising. For more information, refer to Workout Options . If you do not meet the minimu m requirements for operation, a 30-second shutdown process begins . Dots appear in the display and all key presses are ignored. If no movement is detected, the dots steadily disappear as the countdown continues. If you wish to resume exercising, you need to do so before the dots disappear from the display.

76. 100i Commercial AMT Assembly Guide 5 Thread four locknuts (A) onto the bolts to secure the display console onto its bracket. Wrench tighten using a ½-inch socket wrench. Slide a plastic boot (D) onto each handlebar. As you face the display, note which handlebar mounts on the right and on the left pivot arm stubs. Attach the handlebars using four 1¾-inch hex head screws (B), eight washers (C), four locknuts (A). Wrench tighten. Note: When the handlebars are mounted correctly, each bends slightly outward. Cover the fasteners with a plastic boot. Rotate the plastic boot so its tab aligns with the cutout. Apply downward pressure to secure the plastic boots in place.

74. 100i Commercial AMT Assembly Guide 3 Assembly Steps Remove the two side fasteners that hold the front frame tube to the shipping pallet. Cut the tie wraps that secure the rear base. CAUTION: Ask for an assistant to help you roll the AMT off its pallet. Also, do not install the handlebars at this time. The handlebars provide an alternative handhold and, during assembly, may cause injury due to increased foot plate movement. Lift the rear base and roll the AMT forward while your assistant stabilizes the front and guides it off the pallet. Move the AMT to the location where you plan to use it. Insert the end caps (E) into the front frame tube. Align the end caps and, if necessary, use a rubber mallet to secure them in place.

73. 100i Commercial AMT Assembly Guide 2 Hardware Kit Fasteners Qty. (A) Locknut ( ⁵⁄₁₆ -inch) 8 (B) Hex head screw (1¾-inch) 4 (C) Flat washer ( ⁵⁄₁₆ -inch) 8 2 — Plastic boot (D) 2 — End caps (E)

2. STRIDES / MIN CAL / MIN OK RESET UNITS/ LANG. METRICS CALORIES WARMUP FATBURN CARDIO PEAK HIGH HEART RATE SmartRate 2007 Precor Incorporated, en PROGRAMS INTERVAL MANUAL FAT BURNER HEART RATE STRIDE LENGTH RESISTANCE /roduct .Uner's Manual 100i Commercial Adaptive Motion Trainer

9. AMT Safety Features Before allowing users on Precor equipment, review the safety instructions found at th e beginning of this manual. You should also teach your patrons how to safely use the equipment. Explain to your patrons that they should: y y y S tand on the rear pedestal and grasp an arm or a stationary handlebar for stability when prepa ring to step on or off the equipment. H old on to a stationary hand lebar with one hand whenever reaching with the other hand to touch the display keys. S tay clear of the foot plates an d rear pedestal when someone is using the equipment. Product Owner's Manual: AMT Safety Features 6

77. 100i Commercial AMT Assembly Guide 6 Level the AMT. Before allowing users on the AMT, ma ke sure it does not wobble from side to side. To remove any side-to-side move ment, take the following steps: 1. Ask your assistant to tip the unit forward to expose the three levelers on the rear base. 2. Rotate the levelers to raise or lower the unit. Important: If the unit is placed on a slightly uneven surface, rotating the levelers can help, bu t will not compensate for extremely uneven surfaces. 3. When you are finished adjusting the AMT, ask your assistant to gently lower the unit to the floor. Levelers Install the rear pedestal over the rear crosspiece. Important: The rear pedestal lays flat on the floor. It provides a mounting platform for stepping onto the AMT and also indicates the buffer zone that patrons must stay clear of when someone is using the AMT. Rear pedestal

75. 100i Commercial AMT Assembly Guide 4 Important: Temporarily cover the pivot arm holes on the front covers with packing material so fasteners or tools do not inadvertently fall inside. Use a Phillips-head screwdriver to remove the four screws that secure the back console pl ate to the display console. Set the fasteners and cover aside. Hold the display console above its mounting bracket on the AMT. Feed the lower board cable through the hole and out the base of the display console bracket. Connect the heart rate cable to the 4-prong receptacle on the electronics board. Important: Make sure to move the lower board and heart rate cables out of the way as you place the display console onto its mounting bracket. Connect the lower board (RJ45) cable to its receptacle. Lower board cable Heart rate cable Mounting bracket Pivot arm hole Display console bracket

41. Exercise to Your Target Heart Rate A dedicated window displays your heart rate while you exercise. To view your heart rate (beats per minut e) on the display, either wear a chest strap or grasp both touch-sensitive grips. The Precor web site (www.precor.co m) has several suggestions for workouts with varying levels of intensity. It provides many workout details that include the appr opriate target heart rate. The equipment includes one or mo re heart rate programs that let you exercise based on a specifi ed target heart rate. As you exercise, the programs monitor your heart rate and automatically maintain it within a few beats per minute of your selected target. To use these programs, press the PROGRAMS HEART RATE key. For more information, refer to – Programs . Heart Rate Analysis Every time you complete a program using the chest strap or touch-sensitive grips, the display pr ovides a heart rate analysis after the workout summary. Refer to Ending a Workout . Your average heart rate appear s followed by the maximum heart rate achieved during your workout. A third display appears, if you entered your age, and indicates the amount of time your heart rate remained between the target zones shown. The heart rate analysis is based on how often your heart rate signal is received while exercising. If you use the chest strap, the average heart rate will be more accurate th an if you occasionally grasp the touch-sensitive grips. User's Reference Manual: Heart Rate Features 10

62. User's Reference Manual: Programs 31 y y y The Fat Burner Program, availa ble by pressing the FAT BURNER key, is a fairly intense 28-minute program designed to burn fat and increase your cardiovascular co nditioning. Revi ew the program profile on the display to determi ne the ascent and de scent levels of the program. Anytime during a workout, yo u can override the settings by pressing the RESISTANCE keys. The changes raise or lower the columns on the remaining port ion of the program profile. Fat Burner Program T he workout time is set to the fi tness facility limit. To adjust the time, press the TIME +/- key and use the navigational arrow keys followed by OK to change the workout time. I f you wish to quit the Basic HRC Program, you can make a mid-session transfer to another program, but you cannot return or transfer mid-session to the Basic HRC Program. If you are having difficulty with the heart rate features, talk to your fitness facility manager. A cool-down period is automatica lly added to the end of the program.

69. 100i U R M 49737-104, en 03 March 2008 Precor, C, CrossRamp, EFX, M, Move Beyond, and SmartR ate are registered trademarks of Precor Incorporated. AMT, Adaptive Motion Trainer, Crosstrainer, QuickStart, an d StretchTrainer are trademar ks of Precor Incorporated. Copyright 2008 Precor Incorporated. Specifications subject to change without notice. www.precor.com NOTICE: Precor is widely recognized for its inno vative, award winning designs of exercise equipment. Precor aggressively seeks U.S. and foreign patents for both the mechanical construc tion and the visual aspects of its product design. Any party contemplating the use of Precor’s product designs is hereby forewarned th at Precor considers the unauthorized appropriation of its proprietary rights to be a very seri ous matter. Precor will vigorous ly pursue all unauthorized appropriation of its proprietary rights. Precor Incorporated 20031 142nd Ave NE P. O . B o x 72 0 2 Woodinville, WA USA 98072-4002 100i Commercial Adaptive Motion Trainer Product Specifications Product Features Length 74 in (199 cm) Width 28 in (72 cm) Height 69 in (176 cm) Weight 445 lb (202 kg) Shipping weight 520 lb (236 kg) Power Self-powered Frame Powder-coated steel Regulatory Approvals FCC, ETL, CE, EN957 CSAFE Compatible Entertainment Option Available Heart Rate Telemetry QuickStart TM SmartRate ® Touch Heart Rate Programs Manual Interval Heart Rate Basic HRC* Fat Burner Electronic Readouts ✳ Use of a chest strap or the touch- sensitive handlebar grips is required. % Complete Resistance Average Heart Rate* Segment Time Remaining Average Speed SmartRate* Calories Stride Length Calories Per Minute Strides Per Minute Calories Per Hour Target Heart Rate Distance Time Heart Rate* Time Elapsed Heart Rate Analysis* Time in Zone* Language Time Remaining Maximum Heart Rate* Units METS Watts Profile Workout Summary

43. Display Console QUICK START STRIDES / MIN CAL / MIN OK RESET UNITS/ LANG. METRICS CALORIES WARMUP FATBURN CARDIO PEAK HIGH HEART RATE SmartRate 2007 Precor Incorporated, en RESISTANCE PROGRAMS INTERVAL MANUAL FAT BURNER HEART RATE STRIDE LENGTH User's Reference Manual: Display Console 12

46. Stride Length Display STRIDE LENGTH The STRIDE LENGTH display presents a visual representation of the length of your stride. The light ed pendulum swings to the right as you stride forward with your right leg and swings to the left as your left leg moves forward. The icons indicate which muscle gr oups are affected by the length of your stride. To view the actual measurement (inches or centimeters) of the length of yo ur stride, choose STRIDE LENGTH through the METRICS key. Refer to Changing Your Workout Display Options . As you lengthen your stride, t he lighted pendulum should consistently reach the same level on the right as on the left. This indicates that you are expen ding the same amount of energy and affecting the same muscle grou ps with your right leg as with your left. More Information about the Center Display CALORIES WARMUP FATBURN CARDIO PEAK HIGH HEART RATE SmartRate STRIDE LENGTH The center display pr esents the program name when you select a program. During an exercise session, the center display becomes a message bar showing additional information depending on user selections and program interludes. For more information about the selections that can appear in this display, refer to Exercise Session . User's Reference Manual: Display Console 15

12. Product Owner's Manual: Self-Powered Features 9 The Optional Power Adapter Kit If you purchase the optional pow er adapter, you must also purchase the internal cable kit. Th e kit supplies the cable, bracket, and fasteners that connect t he power adapter to the lower electronics board. CAUTION: The internal cable kit mu st be installed by authorized service personnel. Do not attempt installation on your own as you could void the Precor Limited Warranty. For more information, refer to Obtaining Service . Once the internal cable kit is inst alled, you can plug the optional power adapter into the equipment. Plug the opposit e end into the appropriate power source for your equipment 120 V or 240 V. Review the safety instructions foun d at the beginning of this manual before using the power adapter. Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service . CAUTION: The battery stored inside the equipment contains hazardous materials and must be disposed of according to Hazardous Waste Regulations. Refer to Hazardous Materials and Proper Disposal .

51. User's Reference Manual: Display Console 20 Note: The OK and ENTER keys are usually interchangeable and provide the same functi on when no peripheral devices are attached to the equipment. However, when an swering prompts that originate from a CSAFE device or computer connection, use the ENTER key. ENTER: Use the ENTER key to accept th e number being displayed. CLEAR: Use the CLEAR key to remove the last number being displayed. The CLEAR and ENTER keys provi de the following functions: Connection Description Computer (CSAFE compatible) If a computer is attached to the CSAFE connection on the equipment, the number keypad lets you enter your user ID and answer other setup prompts. Entertainment Option If an entertainment option is connected to the display, the number keypad acts as a remote control which you use to select the available channels. You can also enter number values in answer to exercise session prompts. Nothing Whether or not peripheral devices are attached to the equipment, the keypad lets you enter number values in answer to exer cise session prompts. You need to press ENTER or OK to confirm the selection. The number keypad has several functions depending on what is connected to the equipment. ENTER CLEAR 123 456 789 0 Number Keypad

21. Product Owner's Manual: Club Features 18 User ID Entry with CSAFE Equipment The equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAF E master device, the user is prompted to press ENTER and begi n an identification process. The user ID is displayed as five zeros and indicates the starting point. The following table describes key functions while in CSAFE mode. Table 5. CSAFE access keys Keypad Description Number keypad Use the number keys to enter a user ID. The number that is pressed appears on the right. As the user continues, the numbers fill in the display from right to left. When all five numbers are in place, the user must press ENTER or OK to submit the user ID. CLEAR or BACK Erases individual numbers in the user ID from right to left. ENTER or OK Submits the user ID. Note: User ID entry is bypassed when the user enters five zeros. No workout statistics are recorded. RESET or PAUSE/RESET Resets the display to the banner. A message appears on the display and indicates when the user ID is accepted by the CSAFE master device. Once program selection is complete, the user can begin exercising. To review information about CSAFE specifications, visit the web site at: www.fitlinxx.com/csafe If you have questions or need technical support, refer to Obtaining Service .

36. Heart Rate Features CALORIES WARMUP FATBURN CARDIO PEAK HIGH HEART RATE SmartRate Heart rate and SmartRate ® features are available when you wear the chest strap or grasp both touch-sensitive grips. When a heartbeat is detected, the HEART RATE display shows your heart rate and, if your age has been en tered, the SmartRate LED blinks and indicates your target zone. Important Use and Safety Information Read the following before usin g the heart rate or SmartRate features. y y y y C onsult your physician before engaging in any vigorous exercise. Do not use the heart rate programs until authorized by your physician. K now your heart rate and your physician-recommended heart rate target zone. Individual heart rates vary according to several physiological factors and may no t correspond directly with the following figure. A lways face forward on the eq uipment and use the stationary handrail or handlebars for balance. O n self-powered equipment, main tain a comfortable rate of motion above the minimum requirements. Check with the facility manager to determine the requirements to maintain power. User's Reference Manual: Heart Rate Features 5

47. More Information about the Lower Display STRIDES / MIN CAL / MIN RESISTANCE The lower display provides informat ion about your workout session. Pressing the keys beneath each window affects what appears in the displays. Each display provides information about your workout statistics and is described in the list below. Note: If you choose to rest a book or magazine on the display, you can still view these workout statistics. TIME ELAPSED and TIME REMAINING TIME ELAPSED —displays time in mi nutes and seconds and indicates the amount of time you have been exercising. When you exceed 60 minutes duri ng a single session, the display converts to hours and minutes. Note: The fitness facility can pl ace limits on workout time. TIME REMAINING —shows the amount of time remaining in a workout. If the selected time is less than 60 minutes, the display shows time in minutes and seconds. If you select a time greater than 60 minutes, the display reflects hours and minutes until the countdown reaches 60 minutes, at which time the display reverts to minutes and seconds. RESISTANCE RESISTANCE —displays the resistance you feel against your stride. The RESISTANCE keys let you set a resistance level between 1 and 20. User's Reference Manual: Display Console 16

42. User's Reference Manual: Heart Rate Features 11 Troubleshooting Heart Rate The following table may help you understand and troubleshoot erratic heart rate readings. Important: A heart rate can only be detected when the Precor heart rate receiver is properly inst alled in the display. A user must wear the chest strap or grasp both touch-sensitive grips. Table 2. Erratic heart rate readings What appears on the display Cause What to do Nothing The heart rate receiver is not installed or it has been disconnected. Call Customer Support. Refer to Obtaining Service . HR or Hr A signal is being detected through the chest strap or the touch-sensitive grips, but a valid heart rate is not yet established. Be sure that the chest strap is moist, centered, and in direct contact with your skin. If you are using the touch-sensitive grips, continue to grasp both of them. Wait a few moments for your heart rate to appear. Note: To conduct electrical impulses from a user’s heart, both touch-sensitive grips must be grasped firmly for five to ten seconds. Usually, the concentration of salt s in a person’s perspiration provides enough conductivity to tran smit a signal to the receiver in the display console. However, be cause of body chemistry or erratic heartbeats, some people cannot us e the touch-sensitive grips. A chest strap may provide better results.

22. Maintenance It is important to perform the minor maintenance tasks described below. Failure to maintain the equipment as described in this section could void the Pr ecor Limited Warranty. DANGER To reduce the risk of electrical shock, always unplug the equipment from its power source (an optional power adapter in the case of self-powered equipment) before cleaning it or performing any maintenance tasks. Daily Inspection Look and listen for slipping belts, loose fasteners, unusual noises, worn or frayed power cords, an d any other indications that the equipment may be in need of serv ice. If you notice any of these, obtain service. Important: If you determine that the equipment needs service, disconnect any power connections and move the equipment away from the exercising area. Place an OUT OF SERVICE sign on it and make sure all patrons and user s know that they must not use the equipment. To order parts or to contact a Preco r authorized service provider in your area, refer to Obtaining Service . Daily Cleaning Precor recommends the equipment be cleane d before and after each exercise session. Use mild soap and water to dampen a clean, soft cloth and wipe all exp osed surfaces. This helps remove dust and dirt. CAUTION: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and void the Precor Limited Warranty. Never pour water or spray liquids on any part of the equipment. Allow the equipment to dry completely before using. Frequently vacuum the fl oor underneath the eq uipment to prevent the accumulation of dust and d irt, which can affect the smooth operation of the equipment. Use a soft nylon scrub brush to clean the running belt on tr eadmills or the groove s on equipment with foot pedals. Moving the Equipment It is important, if you plan to mo ve the equipment, that you obtain adult help and use proper lifting technique. The equi pment is very heavy. Take advantage of the ro ller wheels on the equipment when moving it to a new location. Do not grasp any plastic parts while lifting or moving the equipm ent. The plastic parts are not structurally linked to the equipment and will break. Product Owner's Manual: Maintenance 19

39. Using the Touch-Sensitive Grips While exercising, you must grasp bo th touch-sensitive grips for a minimum of five to ten seconds to transmit yo ur heart rate to the display. Refer to the following figure. Figure 5: Touch-sensitive grips Usually, the concentration of salt s in a person’s perspiration provides enough conductivity to tr ansmit a signal to the receiver inside the display console. However, some people, because of body chemistry or erratic hea rt beats, cannot use the touch-sensitive grips. A chest stra p may provide better results. Important: While exercising, do not we ar a chest strap and grasp the touch-sensitive grips at the sa me time. Using both features may cause erratic heart rate readings. Using SmartRate The SmartRate feature helps you mo nitor and maintain your heart rate in the target zone best suit ed to your specific needs. When a heart rate signal is detected, a single LED blinks and indicates the zone that your heart rate is in. Important: To use the SmartRate feature, you must enter your age during program selection. Refer to Selecting a Program . The following table shows the pe rcents used in calculating the heart rate target zones. While your heart rate remains within these zones, the corresponding light blinks and provides a visual cue. CAUTION: Your heart rate should never exceed 85% of your maximum aerobic heart rate or go above PEAK. If it does, immediately reduce the intensity of your workout to return your heart rate to your physician-recommended target zone. User's Reference Manual: Heart Rate Features 8

65. User's Reference Manual: Exercise Session 34 1. 2. 3. Changing Your Workout Display Options During an exercise session, the display becomes a message bar. It can show additional workout statistics depending on user selections accessed through the METRICS menu. To display more workout statistics or choose one am ong them, take the following steps: Pr ess METRICS. Sc roll through all the available workout statistic displays by continually pressing the METR ICS key. The following table describes which displays are available. Wh en you are ready, press OK to select a displayed metric or display the entire menu co nsecutively, by selecting SHOW ALL . Note: To remove a scrolling statistic from the message bar, you need to reenter the METRICS me nu and select a different workout statistic display or select the OFF option.

60. Manual Program The Manual Program profile, ava ilable by pressing the MANUAL key, begins as a flat line. You control resistance settings using the RESISTANCE keys. The program pr ofile reflects any changes. The blinking column indicates you r position in the program. A cool-down period occurs auto matically when you end your workout. An exception to the cool -down period exists if the fitness facility allows it. Refer to Cooling Down After a Workout for more information. Note: To change the workout time, pre ss the TIME +/- key. Refer to Changing the Workout Time . To change to a distance or calorie goal, press the GOAL key. Refer to Changing Your Workout Display Options . Interval Program The Interval Program, available by pressing the INTERVAL key, is among the best for conditioning your cardiovascular system. The program raises and lowers your level of exertion repeatedly for the specified period of time. The program lets you choose the re st and work intervals according to your training regimen. While exercising, you can vary your stride rate and the resistance. To change the preset resistance settings, use the RESISTANCE keys. The settings are repeated th roughout the remainder of the program. The display lets you know when the resistance is about to change and it indicates the le vels of the next interval. The initial settings for resistance are: Rest interval resistance: 1 Work interval resistance: 4 If you prefer to set a calorie or distance goal, use the GOAL key. Refer to Changing Your Workout Display Options . User's Reference Manual: Programs 29

58. User's Reference Manual: Workout Options 27 1. 2. 3. 4. Ending a Workout CAUTION: Hold on to a stationa ry handrail when you near the end of your exercise session. To view your workout summary, ma intain the minimum rate of motion when you complete the cool-down period. Refer to Self-Powered Features . The workout summary appears and shows your cumulative statistics including warm-up and cool-down periods. You can review your statistics as long as you maintain power with the minimum rate of motion. En d your session by pressing t he RESET key to return to the Precor banner. Sl ow your movement to a stop. Ho ld on to a stationa ry handrail as you step off the equipment. Note: If the optional powe r adapter is attached, you do not have to continue the minimum rate of motion to view your workout statistics. When you complete th e cool-down period, the workout summary appears. When you are rea dy, press RESET to return to the Precor banner. If you hold on to the touch-sens itive grips or wear a chest strap while exercising, a heart rate analysis appears during the workout summary. Refer to Heart Rate Analysis .

11. Symptoms of a Low Battery If no one has used the equipmen t for an extended period of time, the battery may need recharging. Symptoms of a low battery include: y y A flickering or erratic display U ser and program information is lost once the user stops exercising. No workout summary or notification of pending shutdown occurs. Important: To maintain a constant pow er source, use the optional power adapter. Using the Optional Power Adapter After connecting the power adapte r to the equipment, plug the opposite end into the appropriate power source 120 V or 240 V. CAUTION: When the optional power adapter is in use, make sure that the power supply co rd does not create a safety hazard. Keep it out of the way of traffic and moving parts. If the power supply cord or power conversion module is damaged, it must be replaced. The display functions different ly when the power adapter is connected. Because the power adap ter provides a constant source of power, a user can pause for brief periods without initiating shutdown procedures. When the pa use time limit expires and the user has not resumed exercising, the display returns to the Precor banner. Refer to Setting a Pause Time Limit . To learn how to install the power adapter, refer to The Optional Power Adapter Kit . Product Owner's Manual: Self-Powered Features 8

53. Choosing QUICKSTART QUICK START 1. Wh ile the Precor banner scrolls, press QUICKSTART to begin the Manual Program. QUICKSTART applies t he following defaults: Prompts Default Value Program Manual Time Fitness Facility setting Weight 150 lb (68 kg) Age 0 2. 3. Us e the RESISTANCE keys to change the resistance. Ma intain a comfortable and co nsistent stride rate while exercising. Note: To use the SmartRate feature, you need to specify your age and wear a chest strap or gras p both touch-sensitive grips. In this case, press MANUAL and then press OK. Follow the prompts to enter your weight and age. You can use the navigational arrow keys or t he number keypad to change the blinking prompts. Press OK to confirm the entries. User's Reference Manual: Workout Options 22

20. Error Log Quick access to the informational display is available if error messages have appeared on the display and have been recorded in the error log. This feature is usually reserved for service personnel. At the Pr ecor banner, press and hold RESET for 4 seconds. If DIAGS - INFORMATION DISPLAY or ERROR LOG appears, press OK. If no errors are logged, STOP KEY or STUCK KEY appears. When you release the key, the Precor banner returns. Erasing the Error Log When you no longer need the erro r log information, you may erase all entries in the error log by pr essing the QUICKSTART key while any error description is scrolling across the display. Continue to maintain light pressure on the key until the message, HOLD TO CLEAR ERRORS , scrolls off the display. When the key is released, NO ERRORS appears on the display, which indicates the error log has been deleted. Important: You cannot retrieve the erro r log once you have deleted it. You may want to resolve any issues you are experiencing with the equipment before erasing the error log. When you are ready, press RESET to return to the Precor banner. Product Owner's Manual: Club Features 17

38. 3. Wearing a Chest Strap During a workout, the heart rate features appear on the display when you wear a chest strap. To re ceive an accurate reading, the chest strap needs to be in dir ect contact with your skin. 1. Ca refully dampen the back of the strap with tap water Refer to the following figure. Note: Do not use deionized water. It does not have the proper minerals and salts to cond uct electrical impulses. Figure 2: Moisten chest strap 2. Ad just the strap and fasten it around your chest. The strap should feel snug, not restrictive . Refer to the following figure. Figure 3: Adjust chest strap Ma ke sure that the chest strap is right side up, lies horizontally across your chest, and is centered in the middle of your chest. Refer to the following figure. Figure 4: Fasten chest strap After you put on the chest strap, face the display console for a few seconds. This allows the receiver in the console to recognize the signal from the chest strap. User's Reference Manual: Heart Rate Features 7

10. Self-Powered Features On self-powered equipment, the batte ry initializes and displays the Precor banner when a user starts exercising. A minimum rate of motion must be maintained for t he banner to appear, as shown in the following table. When a pers on meets the requirements, the power that is generated allows t he equipment to f unction properly. Table 1. Minimum requir ements for operation Equipment Rate of Motion AMT 56 strides per minute (SPM) EFX 40 strides per minute (SPM) Climber 30 steps per minute Cycle 20 revolutions per minute (RPM) Informational displays appear when the battery is low or when the rate of motion drops below the minimum requirements. The display explains what to do to retain power. If the messages are ignored, the equipment begins shutdown pro cedures to maintain the charge of the battery. Refer to Informational Displays Prior to Shutdown . An optional power adapter ca n be purchased and provides sustained power to the equipment. If you plan to change the club settings, the power adapter is highly recommended. To purchase the optional power adapter, check with your dealer. Refer to Obtaining Service . Informational Displays Prior to Shutdown The equipment saves its battery ch arge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. Dots appear in the display and all key presses are ignored. If no movement is detected or the ra te of motion remains below the minimum, the dots steadily disappear as the countdown continues. Note: The user can resume exercising if he or she begins before the countdown period elapses. Important: If the equipment is conn ected to a CSAFE master device, a slightly different scen ario occurs. When ten seconds remain before the equipment shut s off, the exercise session ends. RESETTING appears in the displa y while the equipment disconnects from the CSAFE master device. All key presses are ignored. Product Owner's Manual: Self-Powered Features 7

14. Table 2. Club custom features and settings Club Programming Prompt Factory Default Setting Changes you can make SELECT LANGUAGE English Several languages affect the display prompts. Choose one. SELECT UNITS U.S. Two standard units of measure affect the display prompts. Choose between U.S. or Metric. SET MAX WORKOUT TIME 60 minutes Exercise session time limits range from 1 to 240 minutes. NO LIMIT is accessible beyond 240 minutes. SET MAX PAUSE TIME 120 seconds Pause time limits range from 1 to 120 seconds (2 minutes). Restrictions exist for self-powered units. SET COOL DOWN TIME 5 minutes Cool-down time limits range from 0 to 5 minutes. Note: If a user changes the language or unit of measure during an exercise session, the display resets to the club preferences when a user’s workout ends. Accessing Club Programming Mode and Changing the Settings Read the Club Programming Tips to identify useful information about customizing your Precor equipment. To access the available menus and change the program settings, perform the following steps: 1. At the Precor banner , press the following keys in sequence without pausing between selections: RESET, 5, 6, 5, 1, 5, 6, 5 The club programming prompts ap pear sequentially and in a menu format. The following table de scribes which keys to use in club programming mode. Product Owner's Manual: Club Features 11

25. Product Owner's Manual: Precor Commercial Equipment Limited Warranty 22 This Limited Warranty shall not apply to: 1. Software (PROM) version upgrades. 2. Normal wear and tear, consumables and cosmetic items, including, but not limited to the following: grips, seats, and labels. 3. Repairs performed on Precor equipment missing a serial number or with a serial tag that has been altered or defaced. 4. Service calls to correct installation of the equipment or instruct owners on how to use the equipment. 5. Pickup and delivery involved with repairs. 6. Any labor costs incurred beyond the applicable labor warranty period. Disclaimer and Release. The warranties provided herein are the ex clusive warranties given by Precor and supersede any prior, contrary or additi onal representations, whether oral or written. ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS DESCRIBED ABOV E ARE LIMITED IN DURATION TO THE PERIODS OF EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS. PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. PRECOR ALSO HEREBY DISCLAIMS AND EX CLUDES ALL OTHER OBLIGATIONS OR LIABILITIES, EXPRESS OR IMPLIE D, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED TO: (A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR OR ITS SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED); AND (B) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer and release shall apply even if the express warranty set forth above fails of its essential purpose. Exclusive Remedies. For any product described above that fails to conform to its warranty, Precor will provide, at their option, one of the foll owing: (1) repair; (2 ) replacement; or (3) refund of the purchase price. Precor Limited Warranty service may be obtained by contacting the authorized de aler from whom you purchased the item. Precor compensates Servicers for warranty trips within their normal service area to repair commercial equipment at the customer’s location. You may be charged a trip charge outside the service area. THESE SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYE R FOR ANY BREACH OF WARRANTY. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, FOR DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF USE, REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE EQUIPMENT, ADDITIONAL COSTS INCURRED BY BUYER (BY WAY OF CORRECTION OR OTHERWISE) OR ANY OTHER INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM NONDELIVERY OR FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. This exclusion applies even if the above warranty fails of its essential purposes and regardless of whether such damages are sought for br each of warranty, breach of contract, negligence, or strict liability in tort or under any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Complete this portion and keep for your records. Purchased From: _______________________________________ (Dealer or store name) Phone Number: _______________________________________ (Dealer or store telephone number) Product/Model: : _______________________________________ (For example: EFX534i or C966i) Serial Number: : _______________________________________ (The serial number is found on the shipping container.) Effective 27 March, 2006 P/N 36286-112

34. AMT Features The AMT is equipped with certain items that, when used properly, help sustain an enjoyable work out. These items include: y y y y A daptive Motion™ M oving handlebars fo r a total body workout U sing the Stationary Handrails S elf-powered features Important: Before exercising, review th e safety instructions found at the beginning of this manual. Adaptive Motion The technology behind the Adaptive Motion, low-impact, cardio trainer adapts to you r movements and lets you shift from short strides to long strides, walking an d running, or move in to deep lunges. Moving Handlebars Support the Total Body Workout The handlebars provide an upper-body workout which helps increase cardiovascular fitness. By adding the total body movement to your cross training workout, you are actually increasing your work effort and enhancing you r overall fitness level. Using the Stationary Handrails To maintain your balance, always grasp a stationary handrail when you step on or off the equipment and when you use the keypads. To learn more about the touch-sensitive grips, refer to Heart Rate Features . User's Reference Manual: AMT Features 3

54. Selecting a Program PROGRAMS INTERVAL MANUAL FAT BURNER HEART RATE 1. 2. 3. 4. Wh ile the Precor banner scrolls, press one of the PROGRAMS keys, and then press OK. A t ime prompt blinks in the disp lay. Use the navigational arrow keys or the number keys to ad just the minutes (1–240), and then press OK. (Or, press CLEAR to return to the default time limit). Note: The fitness facility can set limits for workout, pause, and cool-down times. So, selecting an unlimited workout time may not be allowed. Check with your fitness facility manager. To access the NO LIMIT option at the ti me prompt, use the number keypad and type in 240, then press the up arrow key. When NO LIMIT appears, press OK. If you choose this option, the automatic cool-down period is eliminated. You will need to inco rporate a cool-down period by accessing the Manual Program. En ter your weight (1–999), an d then your age (1–99) when prompted. Note: To change a value (program, time, weight, or age) that you have already entered, press RESET to return to the Precor banner. Select a program and re-e nter the appropriate values. Ma intain a comfortable and co nsistent stride rate while exercising. User's Reference Manual: Workout Options 23

48. CALORIES/MIN, STRIDES/MIN, and DISTANCE CAL/MIN —displays the approximate number of calories burned per minute. STRIDES/MIN —displays the number of strides you complete in a minute up to a maximum value of 510 strides per minute. A stride is an exagg erated walking movement. If you start in a position with one fo ot plate forward, a stride is completed when you move the re ar foot plate all the way forward while the other foot plate moves to the rear. Two strides create one complete revolution of the flywheel. So, the value that appears on the display is always an even number between 56 and 510. DISTANCE —shows linear distance in either miles or kilometers. Keypads Use the keypads to enter your exercise session selections and display preferences. Distinct keypads exist on the di splay and are discussed in this section: y y y y L ower Display keypad and the selection keys N avigational keypad in the center of the display P ROGRAMS keypad N umber keypad with th e ENTER and CLEAR keys Lower Display Keypad and the Selection Keys QUICK START STRIDES / MIN CAL / MIN RESISTANCE User's Reference Manual: Display Console 17

6. Radio Frequency Interference (RFI) Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid e reasonable protection against harmful interference in a commercia l installation. The equipment generates, uses, and can radiate ra dio frequency ener gy and, if not installed and used in accord ance with the owner’s manual instructions, may cause harmful interference to radio communications. WARNING Per FCC rules, changes or modifications not expressly approved by Precor could void the user’s authority to operate the equipment. Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la cla sse A est conforme à la norme NMB-003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications This product is compliant to: y y y y y y 2 004/108/EC Electromagnetic Compatibility Directive. 2 006/95/EC Low Voltage Directive. 2 002/95/EC Restriction of Haza rdous Substances Directive. This product conforms to the requirements of the European Council Directive 89/336/EEC, 2004/108/EC Electromagnetic Compatibility and has been tested to the following standards: E N55022, Limits & Methods of Measurement of Radio Interference, Information Technology Equipment. E N55024, Immunity of Inform ation Technology Equipment. This product also conforms to the requirements of the European Council Directive 73/23/EEC, 2006 /95/EC Low Voltage Directive and has been tested to the following standard: I EC 335-1, EN60335-1 Safety of Household and similar Electrical Appliances. Product Owner's Manual: Important Safety Instructions 3

55. Storing Workout Statistics Many fitness facilities connect Prec or equipment to a computer so you can easily retrieve your work out statistics and determine how well you are meeting your fitness go als. If you are interested in maintaining workout statistic inform ation, ask the manager to create a user account and a user ID for you . A user ID entry is required to store your statistics. Note: If the display is blank, you w ill need to maintain the minimum rate of motion to supply power. If the Precor banner appears, the equipment is not connected to a computer. Refer to Selecting a Program or Choosing QUICKSTART . If the equipment is connected to a computer, the following appears: CHOOSE QUICKSTART, ENTER, OR A PROGRAM TO BEGIN To save the statistics generated during your exercise session, take the following steps: 1. 2. 3. 4. Pr ess ENTER. Us e the number keypad to specify your 5-digit user ID. If you make a mistake, press the CLEAR key and reenter the correct number. Wh en your user ID is shown, press ENTER. A message appears and indicates when the user ID is accepted by the computer. To begin your exercise session, select a program. Refer to Selecting a Program . Note: To bypass the user ID entry, press ENTER while all five zeros appear in the user ID fiel d. The statistics generated during your exercise session will no t be added to your file. User's Reference Manual: Workout Options 24

61. Heart Rate Program The Basic HRC Program, availabl e by pressing the HEART RATE key, lets you set a target for you r heart rate. The program adjusts the resistance to maintain your he art rate within two beats per minute of the target heart rate while you exercise. To use this program, you must enter your age and wear a chest strap so your heart rate can be monitore d throughout the session. Important: Consult your physician to determine the appropriate target heart rate for your age an d fitness level. If your physician recommends a different target heart rate than the one that appears on the display, use the navigati onal arrow keys to change the target heart rate once you fini sh the warm-up period. Do not exercise over the recommended range. Heart Rate Program Tips The Basic HRC Program enhances your overall cardiovascular fitness levels to help you achiev e your weight loss and fitness goals. Read through the following tips before selecting the Basic HRC Program. These tips provide general information regarding how the program functions. For more information and exercise suggestions, refer to the Precor web site at www.precor.com. Important: Maintain a rate of motion above the minimum requirements. Refer to Self-Powered Features . Automatic adjustments to the resistance cannot take place if you drop below the minimum requirements for operation. y y y T he program provides a 3-minute warm-up period. During this time, you may change the resist ance, but you cannot change the goal setting. Note: When your target heart rate is achieved or the 3-minute period elapses, the warm-up period ends and the program begins at which point, you may change to a distance or calorie goal. T he program automatically adjusts the resistance to keep your heart rate at the selected ta rget. After the warm-up period, pressing the RESISTANCE ke ys no longer affects the resistance levels. Check the SmartR ate display to see if you are maintaining your preferred zone. Check the HEART RATE display to determine your actual heart rate. For information about understanding your target heart rate, refer to Heart Rate Features . Y ou can change the target heart rate, but doing so affects how well your target heart rate remains in the preferred zone. It takes time to readjust the resistance so that your heart rate remains on target. User's Reference Manual: Programs 30

17. Product Owner's Manual: Club Features 14 1. 2. 1. 2. Setting a Pause Time Limit You can limit how long a user ca n pause while exercising on the equipment by entering a time between 1 and 120 seconds (two minutes). For example, if you set a pause time limit of 60 seconds, the display automatically resets to the Precor banner if no movement is detected and no key press occurs for one minute. Important: The optional power adapter must be connected on self-powered equipment to establish a definitive pause time limit. If the optional power adapter is not a ttached and the rate of motion drops below the minimum requireme nts, the equipment begins its 30-second shutdown, effectively e liminating pause mode. Refer to the table in Self-Powered Features . At the SET MAX PAUSE TIME prompt, press OK. Use the navigational arrow keys to change the time limit. Choose between 1 and 120 seconds (two minutes). Wh en you are ready, press OK to accept the displayed setting and move to the next feature. For other optio ns, refer to the table in Accessing Club Programming Mode and Changing the Settings . Setting a Cool-Down Time Limit You can limit how long a user c ools down after exercising on the equipment by entering a time between 0 and 5 minutes. Important: It is highly recommended that you set the cool-down period at or above three minutes. It takes time for a user’s heart rate to return to a resting state after vigorous exercise. An effective cool-down period also reduces the am ount of lactic acid in muscle tissue. At the SET COOL DOWN TIME prompt, press OK. Use the navigational arrow keys to display the available time limits. Choose between 0 and 5 minutes. The default setting is 5 minutes. Wh en you are ready, press OK to accept the displayed setting and move to the next feature. For other optio ns, refer to the table in Accessing Club Programming Mode and Changing the Settings .

59. Programs This section describes the progr ams available on the equipment. Use this section as a reference tool to better understand each program’s purpose. Choosing a Program Choosing a program depends on you r goals. If you are a beginner or returning to regular exercise, you can start a cardio-conditioning program to slowly return your body to a comfortable level of exercise. If you have been exercising and feel that you have an intermediate or advanced fitness level, you probably have established goals. The Precor web site (www.precor.com) can give you many ideas about fitness rout ines and advice fr om the experts. Several of the exercise choi ces on the equipment are preprogrammed with recommended settings. However, you have the option to override the suggested settings, with some exceptions. If changes are not a llowed, a message scrolls across the display explaining your options. If your level of exertion becomes too great, reduce your level of intensity by overriding each upco ming segment in the program profile. When you complete a program that contains a time limit or goal period, an automatic cool-down period begins. Program Tips y y y y y y y B egin at the Precor banner and choose a program by pressing a PROGRAMS key or QUICKSTART. Refer to Workout Options . W hile exercising, you need to sustain your exercise motion. Stopping any movement causes the equipment to shut down to conserve battery power. A blinking column indicates your position as you progress through a program. P rior to choosing a program, you may press the UNITS/LANG. key to access units of measure or language settings. After pressing OK to confirm new setti ngs, you must se lect a program within five seconds for the chang es to become effective. Refer to Setting Display Preferences Before Exercising . T o use the SmartRate feature, yo u need to specify your age and wear a chest strap or hold on to the touch-sensitive grips. For more information, refer to Changing Your Workout Display Options . I n some programs, an unlimited time setting may be an available option. Refer to Selecting a Program . T he fitness facility can set lim its on workout, pause, and cool-down times and customize ot her aspects of your exercise session. Check with your manager to learn if any limits are in place that might affect your program selections. User's Reference Manual: Programs 28

63. Exercise Session This section describes how to access the following attributes through the use of the navigational keypad. Any display selections set during the course of your exer cise session are reset to the fitness facility settings when you en d your session and return to the Precor banner. While exercising, you can: y y y y y y c hange the program you are using c hange the workout time c hoose between time-, distance- , or calorie-based goals d isplay more workout statistics c hoose between U.S. standard an d Metric units of measure d isplay messages and prompt s in a different language Note: Prior to selecting a program, you can select preferences for language and units of measure. Refer to Setting Display Preferences Before Exercising . When you enter a navigational ke y menu such as UNITS/LANG. or TIME +/-, you have 30 seconds to make your selection. If no selection is made during those 30 seconds, the display automatically returns to the program session. Important: Do not press the RESET ke y, during those 30 seconds, in an attempt to return to your program because you will inadvertently exit your program. A workout summary appears when you exit the program. Changing Programs in Mid-session You can change programs in the middle of a session by selecting a new program from the PROGRAMS key menu. All accumulated workout statistics are transferred to the new program as you continue exercising. Certain programs are not available for mid-session transfers due to set goals and program preferences. If this occurs, a message scrolls across the display. Note: You cannot select a different pr ogram if your rate of motion drops below the minimum requirem ents and the equipment begins its 30-second shutdown. Refer to Pausing During a Workout or the Cool-Down Period . User's Reference Manual: Exercise Session 32

72. 100i Commercial AMT Assembly Guide 1 Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly inst ructions. If you do not assemble the AMT according to these guidelines, you could void the Precor Limited Warranty. Obtaining Service You should not attempt to service the AMT except for maintenance tasks as described in the Product Owner’s Manual . If any items are missing, contact your dealer. Should you need more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at www.precor.com/corp/contact. Unpacking the Equipment Ask for help from two or more people to unpack and assemble the AMT. Required Tools • Wire tie cutter • Phillips-head screwdriver • SAE Standard socket set • Rubber mallet Cardio Theater PVS Assembly Instructions If the Cardio Theater Personal Viewing System (PVS) accompanies this Precor unit, review the PVS assembly instructions found in the Cardio Theater box. Alleviate additional assembly or di sassembly steps by combining the two assemblies as needed. Installation Requirements Follow these installation requirements when assembling the unit: • Assemble the unit near the location where you plan to use it. • Provide ample space around the unit. Open space around the unit allows for easier access. • Set up the AMT on a solid, flat surface. A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions. • Open the box and assemble the components in the sequence presented in this guide. • Insert all fasteners with your fingers. Use your fingers to properly align an d thread the fasteners. This helps alleviate cross-threading. Do not fully wrench tighten fasteners until instructed to do so. Important: When wrench tightening, the head of the fastener should be flush with the product. If it is not , cross-threading has occurred. Do not attempt to rework the assembly as more damage to the equipment will occur. Contact Customer Support. Refer to Obtaining Service . • If you plan to move the unit, obtain help. Do not grasp any plastic parts while lifting or moving the unit. T he plastic parts are not capable of supporting the weight of the unit and they may break.

49. Left selection key: Every time you press this key, the display reflects either the amount of time elapsed since you began your exercise session or it shows the time remaining. An LED lights and indicates which information is being displayed. RESISTANCE: Press and hold a RESISTANCE key to increase or decrease the fo rce applied against your stride from 1 to 20. QUICKSTART: Press QUICKSTART to start your exercise session immediately using the Manual Program. Refer to Choosing QUICKSTART . Right selection key: Every time you press this key, the display reflects the calories per minute, the strides per minute, or the distance tr avelled since you began your exercise session. An LED lights and indicates which information is being displayed. Navigational Keypad OK RESET UNITS/ LANG. METRICS The navigational keypad provides several ways to change your exercise session and to display va rious workout statistics. The OK key, which allows you to confirm display selections, is also part of the navigational keypad. TIME +/-: You can change the workout time, while you are exercising, by pressing the TIME +/- key. A blinking number appears in the display. You can change the number using the navigational arrow keys or enter a different time using the number keys. Refer to Changing Your Workout Display Options . GOAL: Press the GOAL key to change the goal setting from time, distance, or calories w hen using the Manual, Interval, or Heart Rate Programs. Refer to Adjusting Program Goals . Note: You cannot change the goal during the warm up phase of the Heart Rate Program. OK: Use the OK key to confirm responses to specific prompts. User's Reference Manual: Display Console 18

32. Important Safety Instructions When using Precor equipment, always take basic precautions, including the following: y y y y y y y y y y y y y R ead all instructions before using the equipment. These instructions are written for you r safety and to protect the equipment. O ther sections in this manual pr ovide more details of safety features. Be sure to read these sections and observe all safety notices. T ake time to discuss proper sa fety and exerci se equipment etiquette with the fit ness facility manager. B efore beginning any fitness program, see your physician for a complete physical examination. Il est conseillé de subir un examen médical complet avant d’entreprendre tout programme d’exercise. Si vous avez des étourdissements ou des faible sses, arrêtez les exercices immédiatement. D o not overexert yourself or work to exhaustion. If you feel any pain or abnormal symptoms, st op your workout immediately and consult your physician. D o not allow children or people unfamiliar with its operation on or near the equipment. Do no t leave children unsupervised around the equipment. W ear proper exercise clothing and shoes for your workout and avoid loose clothing. Do not we ar shoes with heels or leather soles. Check the soles of your shoes and remove any dirt and embedded stones. Tie long hair back. F or safety, hold onto a stationa ry handrail or handlebar while using the equipment. K eep your body and head facing forward. Never attempt to turn around on the equipment. D o not rock the equipment. Do not stand on the handrail(s), display console, or covers. U se care when getting on or o ff the equipment. Stand on the rear pedestal and then place one foot in the lower foot plate. Grasp an arm or a stationary handlebar for stability while you step into the other foot plate. T he rear pedestal provides an elev ated platform for stepping on and off the equipment. It also indicates the buffer zone that people must stay clear of when someone is using the equipment. N ever place your hands or feet in the path of the foot plates because injury may occur to yo u or damage may occur to the equipment. Obtaining Service The fitness facility manager can help you with most questions regarding the equipment. For addi tional information about product operation or exercise routines, refer to the Precor web site at www.precor.com. User's Reference Manual: Impor tant Safety Instructions 1

5. y y y y y y y y D o not operate the equipment where aerosol (spray) products are being used or where ox ygen is being administered. D o not use outdoors. D o not attempt to service th e equipment yourself except to follow the maintenance instruct ions found in this manual. N ever drop or insert objects into any opening. Keep hands away from moving parts. D o not set anything on the stat ionary handrails or handlebars, display console, or covers. Pl ace liquids, magazines, and books in the appropriate receptacles. Safety Approval When identified with the ETL- c logo, the equipment has been tested and conforms to the requirements of CAN/CSA-E-335-1/3-04, EN 60335-1: 2002 Sa fety of Household and Similar Electrical Appliances. This equipment is a Class S/B or C certified machine according to applicable EN957 standards. Educating Users Take time to educate users on the safety instructions found in both the User’s Reference Manual and Product Owner’s Manual . Explain to your club or fac ility patrons that they should: H old onto a stationary handrail or handlebar while stepping onto the equipment or when getting comf ortably seated on the cycle. F ace the display at all times. H old on to a statio nary handrail or handlebar with one hand whenever reaching with the othe r hand to touch the display keys. Hazardous Materials and Proper Disposal The self-powered equipment has an internal battery which contains materials that are considered ha zardous to the environment. Proper disposal of the battery is required by federal law. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Supp ort for information regarding battery removal. Refer to Obtaining Service . Product Recycling and Disposal This equipment must be recycl ed or discarded according to applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste elect rical and electronic equipment (WEEE), determine the framework fo r the return and recycling of used equipment as applicable thro ughout the European Union. The WEEE label indicates that the prod uct is not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and recovery of W EEE. Customer participation is important to minimize any potential effects of EEE on the environment and human health due to the potential presence of hazardous substances in EEE. For proper collection and treatment, refer to Obtaining Service . Product Owner's Manual: Important Safety Instructions 2

45. User's Reference Manual: Display Console 14 More Information about the Upper Display CALORIES WARMUP FATBURN CARDIO PEAK HIGH HEART RATE SmartRate STRIDE LENGTH The upper display includes the CALORIES, HEART RATE, SmartRate, and a program profile display. The following descriptions explain what appears in the displays. CALORIES —indicates the estimated cumulative number of calories being burned. HEART RATE —displays your heart rate when you wear a chest strap or grasp both touch-sensitive grips. Refer to Heart Rate Features . SmartRate —displays your heart rate as a blinking segment which indicates the zone your heart rate is in when you enter your age and wear a chest strap or grasp both touch-sensitive grips. Use this display as a visual aid to keep your heart rate in your preferred zone. Refer to Using SmartRate . Program profile —appears during your exercise session. A blinking segment in the profile indicates your position. In most programs, the RESISTANCE setting affects the column height as shown in the following figure. The profile rais es or lowers according to which RESISTANCE key is pressed. 1 – 2 3 – 4 5 – 6 7 – 8 9 – 10 11 – 12 13 – 14 19 – 20 17 – 18 15 – 16 Colu mn hei g ht Resista n ce setti ng s Figure 6: Column height in the program profile

57. Cooling Down After a Workout Incorporate a cool-down period into your workout to help lower your heart rate and minimize mu scle stiffness or soreness. When you complete a program with a time limit or specified goal, you automatically enter a cool-dow n period. The settings change to help reduce the intens ity of your workout. Note: You cannot switch to a differ ent program, goal, or workout time during the cool-down pe riod. Any pressure on the PROGRAMS keys is ignored. A workout summary appears at t he end of the cool-down period. Refer to Ending a Workout . A cool-down period will not be app ended to your exercise session if the following occurs: y y y 1. 2. T he fitness facility allows an un limited time goal. A user must enter a time goal of NO LIMIT to access this option. Refer to Selecting a Program . T he fitness facility sets a c ool-down time of zero, which eliminates the cool-down phase. Y ou exit a program before completing it. If you specify an unlimited time or the fitness facility removed the cool-down phase, remember to in corporate a cool-down period at the end of your exercise session. Pausing During a Workout or the Cool-Down Period If your rate of motion drops below minimum requirements while exercising or during the cool-dow n period, a 30-second shutdown is initiated. You cannot pause for a longer period of time or change to a different program unless the fitness facility has the optional power adapter attached to the equipment. When the optional power adapter is attached, you can pause for a set time, usually two minutes. If you do not resume exercising during that time, the display returns to the banner. To pause, slow to a stop. To exit pause mode, resume exercising. Note: In pause mode, you have the ability to change your program selection or display options if the optional power adapter is attached. Refer to Changing Programs in Mid-session and Changing Your Workout Display Options . User's Reference Manual: Workout Options 26

44. CALORIES display: The estimated cumulative number of calories being burned appears. Upper display: Initially shows the Precor banner. It changes to the program profile when yo u select a program or press QUICKSTART. A blinking column in the profile indicates your position. STRIDE LENGTH display: A lighted pendulum swings according to your stride length . The pendulum swings to the left as you move your left leg and to the right as you stride forward with your right leg. T he icons indicate which muscle groups are affected. Center display and the PROGRAMS keypad: When you press a PROGRAMS key, the prog ram profile appears in the upper display and the program name appears in the center display. During your session, additional information appears in the center display depending on program and user selections. Selection keys: Press the key to move through the information in each column, so you can choose what you want to display during your se ssion. Indicator lights appear next to the item that is displayed. QUICKSTART: Press QUICKSTART to begin your workout immediately. HEART RATE display: If a heart rate is detected, this area displays your heart rate. SmartRate display: A blinking LED lights when you choose a program and enter your ag e during the setup prompts. Number keys: When you begin a progr am, you can use the number keys to answer the setup prompts, such as your weight and age. During an exer cise session, use the number keys to update information. If the entertainment option is attached, the number keys act as TV channel controls. Navigational keys: These keys let you display or change exercise information and end your session. For more information, refer to Navigational Keypad . Lower display: While you exercise, three sets of numbers show information about your se ssion. For more information, refer to Lower Display Keypad and the Selection Keys . RESISTANCE keys: Use these keys to adjust the resistance. User's Reference Manual: Display Console 13

64. Changing the Workout Time To change the duration of your program, take the following steps: 1. 2. 3. 1. 2. Pr ess TIME +/-. A w orkout time blinks in the disp lay. Use the navigational arrow keys or the number keys to adjust the time. Pr ess OK. A message scrolls across the disp lay indicating that the new workout time has been accepted. The fitness facility can limit the duration of exercise sessions and certain programs have fixed time goals which do not allow adjustments. If your attempt to change the workout time is not accepted, display messages scroll and indicate the reasons. Adjusting Program Goals To designate a distance, calories, or time goal while exercising take the following steps: Pr ess GOAL. Continue pressing the key to scroll through the available options: TIME , DISTANCE or CALORIES . Wh en you are ready, press OK to select the displayed goal. Selection Description TIME A time-based goal is the setting for all programs. If you want to exercise for a set time, select this goal. DISTANCE A distance-based goal lets you select a set distance between 1 and 50 miles or kilometers (km). CALORIES A calories-based goal lets you exercise until you reach a set calorie amount between 1 and 1000. 3. 4. A b linking number appears indicati ng that the system is ready for adjustments to the goal. Use the number keys or navigational arrow keys to change the setting. Wh en you are ready, press OK. If the program you are using allows changes to goal settings, a prompt scrolls across the display indicating that your selection has been accepted. The TIME REMAINING display changes according to the goal being set. User's Reference Manual: Exercise Session 33

67. Changing the Units of Measure Display measurements can appear in either Metric or U.S. Standard. To change this setting , perform the following steps: 1. 2. 3. 4. 1. 2. 3. 4. Pr ess UNITS/LANG. The word UNITS appears on the display. Pr ess OK. UNITS scrolls across the display and is replaced by one of two options: U.S. or METRIC . To ggle between the two options by pressing the down arrow key on the navigational keypad. Wh en you are ready, press OK to select the displayed unit of measure. A message scrolls across the display indicating that the unit of measure has changed. Selecting a Language You can choose to display text messages in several different languages. To select a different language before or during an exercise session, take the following steps: Pr ess UNITS/LANG. Press the key a second time and LANGUAGE appears and scrolls across the display. Note: When you press the UNITS/LANG. key a third time, you exit the menu and return to the Precor banner. The center display appears blank. To reenter the menu, press UNITS/LANG. again. Wh ile LANGUAGE scrolls across the display, press OK to select it. Sc roll through the available la nguage options by continually pressing the down key on the navigational keypad. Wh en you are ready, press OK to select the displayed language. A message scrolls across the display indicating that the language has been changed. User's Reference Manual: Exercise Session 36

4. Important Safety Instructions When using Precor equipment, always take basic precautions, including the following: y y y y y y y y y y y y R ead all instructions before using the equipment. These instructions are written to educa te patrons and other users in the proper use of the equipment. O ther sections in this manual pr ovide more details of safety features. Be sure to read these sections and observe all safety notices. B efore beginning any fitness program, make sure all users see a physician for a complete physical examination. Il est conseillé de subir un examen médical complet avant d’entreprendre tout programme d’exercise. Si vous avez des étourdissements ou des faible sses, arrêtez les exercices immédiatement. DANGER Before cleaning it , always unplug the equipment from its power source to reduce the risk of electric shock. Before cleaning self-powered equipment, disconnect the optional power adapter. WARNING To reduce the risk of burns, fire, electric shock, or injury, take the following precautions: D o not allow children or people unfamiliar with its operation on or near the equipment. Do no t leave children unsupervised around the equipment. N ever leave the equipment unattend ed when it is plugged in. Unplug the equipment from the power source when it is not in use, before cleaning it, and befo re providing authorized service. Note: The optional power adapter is considered an electrical power source for self-powered equipment. K eep all electrical components away from liquids to prevent shock. A ssemble and operate the equipment on a solid, level surface. Locate the equipment a few feet from walls or furniture. M aintain the equipment in good working condition. Refer to Maintenance . I f you plan to move the equipm ent, obtain help and use proper lifting techniques. For more information, refer to Moving the Equipment . U se the equipment only for its in tended purpose as described in this manual. Do not use accessory attachments that are not recommended by the manufacturer, as such attachments may cause injuries. N ever operate the equipment if it is damaged, not working properly, when it has been droppe d, or has been immersed in water. Return the equipment to a service center for examination and repair. K eep the power cord or optiona l power adapter and plug away from heated surfaces. Product Owner's Manual: Important Safety Instructions 1

40. Table 1. Heart rate target zones and SmartRate LEDs Heart Rate Zone Percent LED Lit LED Blinking Zone Label Below 50 First Orange WARMUP 50 to 54 Second Orange WARMUP 55 to 59 Third Green FAT BURN 60 to 64 Fourth Green FAT BURN 65 to 69 Fifth Green FAT BURN 70 to 74 Sixth Green CARDIO 75 to 79 Seventh Green CARDIO 80 to 84 Eighth Green CARDIO 85 to 87 Ninth Orange PEAK Above 87 Tenth Orange HIGH The SmartRate indicator lights do not blink when: y y Y ou do not wear or improperly pos ition the chest strap. Or, you fail to grasp both touch-sensitive gr ips for five to ten seconds. Y ou do not enter your age during an exercise session. For example, pressing QUICKS TART at the Precor banner causes the Manual Program to begin. Your age has not been entered and is considered a nu ll value. Your heart rate will appear in the HEART RATE di splay when you hold onto the touch-sensitive grips or wear a chest strap, but none of the SmartRate LEDs blink because the appropriate calculations have not been made. Note: You can remedy this situation by choosing a program using one of the PROGRAMS ke ys and entering your time, weight, and age. User's Reference Manual: Heart Rate Features 9

18. Informational Displays The equipment provides information about it s use (odometer and hour meter), as well as software versions and part numbers, seri al number, usage log, and error log. In general, you would only access this information if directed to do so by Precor Customer Support. To navigate through the informat ional displays, use the following flowchart. Desc riptions for these displays are shown in the f ollowing table. Note: The CLEAR key is located on the Number Keypad and t he RESET key is located on the Navigational Keypad. DIAGS INFORMATIONAL DISPLAY HOUR METER UPPER BASE SW PART NUMBER UPPER BOOT SW PART NUMBER SERIAL NUMBER ODOMETER SERIAL NUMBER NONE USAGE LOG PROGRAM ERROR LOG ERRORS ERROR HOLD TO CLEAR ERRORS PRECOR STRIDE DIAL SW PART NUMBER METRICS BOARD SW PART NUMBER LOWER BASE SW PART NUMBER RESET, 6, 5 OK CLEAR ### OK CLEAR ### OK CLEAR #####-### OK CLEAR #####-### OK CLEAR #####-### OK CLEAR #####-### OK CLEAR #####-### OK CLEAR OK CLEAR CLEAR CLEAR OK OK QUICKSTART # Product Owner's Manual: Club Features 15

13. Club Features These next few pages explain how to customize the equipment for your club or facility and view usef ul product information. All these features remain hidde n to the patrons and can only be accessed using special key presses. Read this section if you want to: y y y y y y y y y y y y y C hange the display to a different language C hange the display to show U.S. standard or metric measurements S et the maximum exercise and pause times S et a cool-down time limit V iew the odometer D isplay the number of hours t he equipment has been in use V iew the software versions and part numbers D isplay the serial number C heck the program usage and error logs Note: To review the club programming prompts and factory default settings that can be ch anged through club programming mode, refer to the following table. Club Programming Tips A lways start at the Precor banner. E lectrical power must be supplied. For self-powered equipment, a constant power source is ava ilable if you us e the optional power adapter, otherwise you will have to maintain the minimum rate of motion. Refer to Self-Powered Features . If you plan to program self-powered equipmen t, purchasing the optional power adapter is highly recommended. Note: If you do not use the optional power adapter during club programming mode, and the rate of motion falls below the minimum requirements, no warning is given when the equipment moves into its 30-second shutdown procedure. T he club programming mode is accessed by pressing the RESET key at the Precor banner . The remaining key presses must occur quickly and without pause. Note: Keys that can be used interchangeably in club programming mode ar e OK and ENTER. T he changes made in club pr ogramming mode become the default settings whenever the di splay resets to the Precor banner. Product Owner's Manual: Club Features 10

56. Setting Display Preferences Before Exercising While the Precor banner scrolls, you have the opportunity to set units of measure and lang uage display preferences. Once you set your display pref erences, you have a 5-second window to select a program. If you do not select a program from the PROGRAMS menu or pre ss QUICKSTART within the 5-second window, the preferences return to the fitness facility settings. 1. 2. 3. 4. As the Precor banner scrolls , press UNITS/LANG. Continue pressing the key to view the two menu options: UNITS and LANGUAGE . Wh en you are ready, press OK to select the displayed menu option. Us e the navigational arrow keys to display each menu option or preference. Press OK to select it. Fo llow the prompts on the disp lay and return to the Precor banner. Menu Option Preferences Effect UNITS U.S. or METRIC Determines which units of measure appear on the display. L ANGUAGE ENGLISH , DEUTSCH , ESPANOL , FRANCAIS , NEDERLANDS , PORTUGUES , RUCCKIJJ , and ITALIANO . Causes the display messages and prompts to appear in the chosen language. Note: The selections that you make prior to a workout reset to the fitness facility’s default se ttings once your program or the pause time limit ends. User's Reference Manual: Workout Options 25

24. Precor Commercial Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty periods set forth below. The warranty periods commence on the invoice date of the original purchase. This warranty applies only against defects discovered within the warranty period and extends only to the original purchaser of the product. Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only. To claim under this warranty, the buyer must notify Precor or your authorized Precor dealer within 30 days after the date of discovery of any nonconformity and make the affected pr oduct available for inspection by Precor or its service representative. Precor’s ob ligations under this warranty are limited as set forth below. Warranty Periods and Coverage. Commercial Cardiovascular Products, also known as C-Series Products, (excluding StretchTrainer, Strength Products). ƒ Seven years frame, five years display face assembly, three years motor controller, one year durable wear parts, two years parts, one year labor. ƒ For treadmills, five years drive motor. ƒ For self-powered ellipticals an d bikes, one year battery. ƒ For InSite, one year parts and labor. ƒ Labor coverage for options as defined below. StretchTrainer Five years frame, two years parts, 90 days upholstery, no labor. Strength Products (S3.45 and S3.25 only) Ten years frame; three years bearings, guide rods, cams, pulleys; one year belts, cables, hand grips, miscellaneous pa rts; 90 days upholstery; no labor. Options / Accessories / Battery-powered or Self-Operated Devices Many options or accessories have compo nents that are connected internally or mounted inside the electronic console. The following guidelines determine the warranty for these components. If the internal components are installed by the factory or by an authorized dealer as part of the original sale and delivery, they have a warranty that is identical to the warranty of the equipment in which they are connected or mounted. If the internal components are not installed by the factory or by an authorized dealer as part of the original sale and delivery, they have a 90 days parts and labor limited warranty. All components that are not internally connected have a 90 days parts only limited warranty. Satisfactory proof of purchase is required in all cases. Conditions and Restrictions. This warranty is valid only in accordance with the conditions set forth below: 1. The warranty applies to the Precor product only while a. it remains in the possession of the original purchaser and proof of purchase is demonstrated, b. it has not been subjected to accident , misuse, abuse, improper service, or non-Precor modification. c. claims are made within the warranty period. 2. Certain products are warranted for stan dard commercial use only (defined as use in non-fee paying clubs or facilities and less than 6 hours daily use. Unapproved use voids the warranty. Current standard commercial products include C936i, C932i, EFX524i, EFX534i.). 3. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance wi th electrical codes or Precor owner’s manual specifications, or failure to provide reasonable and necessary maintenance as outlined in the owner’s manual. 4. Except in Canada, Precor does not pay labor outside the United States. 5. Warranties outside the United States and Canada may vary. Please contact your local Dealer for details. Product Owner's Manual: Precor Commercial Equipment Limited Warranty 21

16. Choosing a Language The equipment can display user prom pts, text, and user entries in several different languages. When the equipment is shipped from the factory, it is se t to display English. Note: Programming prompts are not affected by language selection. The prompts in this section continue to appear in English. 1. 2. 1. 2. 1. 2. At the SELECT LANGUAGE prompt , press OK. Use the navigational arrow keys to choose a language. Wh en you are ready, press OK to accept the displayed setting and move to the next feature. For other optio ns, refer to the table in Accessing Club Programming Mode and Changing the Settings . Selecting a U.S. Standard or Metric Display The equipment can display measurem ents in either Metric or U.S. Standard. The default fact ory setting is to display U.S. Standard. To change this setting, perfor m the following steps: At the SELECT UNITS prompt, press OK. Us e the navigational arrow keys to select a unit of measure ( US or METRIC ). Wh en you are ready, press OK to accept the displayed setting and move to the next feature. For other optio ns, refer to the table in Accessing Club Programming Mode and Changing the Settings . Setting an Exercise Session Time Limit You can limit how long a user ca n exercise on the equipment. For example, if you set the time limit to 20 minutes, users can only enter a session time between 1 and 20 minutes. Note: The automatic cool-down period is appended to the end of any time-based program, so adjust the time limit accordingly. You can also let a user exercise indefinitely by selecting NO LIMIT . However, you will need to instruct users that once they select a program, they must press the TIME +/- key. A workout time blinks in the display. They need to use the Number Keypad to type in 240, press the up arrow key to display NO LIMIT , and then press OK. The exercise session times av ailable are between 1 and 240 minutes. At the SET MAX WORKOUT TIME prompt, press OK. Use the navigational arrow keys to change the displayed time limit. Note: When you press and hold a navigational arrow key, the number increments by five, for example, 1, 5, 10, 15, 20. When you tap an arrow key, t he number increments by one. Wh en you are ready, press OK to accept the displayed setting and move to the next feature. For other optio ns, refer to the table in Accessing Club Programming Mode and Changing the Settings . Product Owner's Manual: Club Features 13

50. Up and Down Arrows: These keys present the available selections and affect what appears on the display. Throughout this manual they are referred to as the navigational arrow keys. METRICS: The METRICS key provides menu selections that let you customize the display wi th specific workout statistics after you are already engaged in exercising. Refer to Changing Your Workout Display Options . UNITS/LANG.: You can change the uni ts of measure or select one of several different languages by pressing this key. The display reflects your se lections after you press the OK key. For more information, refer to Changing the Units of Measure or Selecting a Language . RESET: Press this key to end the workout session and view your workout summary. An exception to this rule exists if you have entered the 30-second shutdown period. When you press RESET, the display returns to the Precor banner. Refer to Pausing During a Workout or the Cool-Down Period or Self-Powered Features . PROGRAMS Keypad PROGRAMS INTERVAL MANUAL FAT BURNER HEART RATE The PROGRAMS keypad provide s access to all the exercise programs. Press the center of the key to view the top level program in its menu. Pressing the key agai n displays the next program in the menu, if one is available, as sh own in the following table. For a description of each program, refer to Programs . Note: Use the OK key to confirm your selection. For more information, refer to Workout Options . Table 3. Available programs PROGRAMS key Program Menu MANUAL MANUAL INTERVAL INTERVAL HEART RATE* BASIC HRC * FAT BURNER FAT BURNER * Use of a chest strap or the touch-sensitive grips is required. User's Reference Manual: Display Console 19

52. Workout Options CAUTION: Before beginning any fitness program, see your physician for a complete physic al examination. Know your physician-recommended heart rate target zone. 1. 2. 3. 4. St and on the rear pedestal and face the display. Pl ace one foot in the lower foot plate and grasp an arm or a stationary handlebar for stability while you step into the other foot plate. Wh en you are comfortably si tuated, begin climbing. CAUTION: Hold on to a handrail to balance yourself. Se lect one of the following options: Option... Steps... To start exercising immediately • • U se the QUICKSTART key. R efer to Choosing QUICKSTART . To select a program • • P ress a PROGRAMS key. R efer to Selecting a Program . To enter a user ID • • U se the ENTER key. R efer to Storing Workout Statistics . To set display preferences in units of measure or language • • U se the UNITS/LANG. key. R efer to Setting Display Preferences Before Exercising . Note: The QUICKSTART key is disabled when you press a PROGRAMS key. You need to co nfirm each exercise session selection (program, time, weight , and age) using the OK key. User's Reference Manual: Workout Options 21

19. Table 4. Informational Displays Product Display Description All ODOMETER The odometer value correlates to the type of Precor product an d the standard of units, U.S. or Metric, selected in the club programs. Treadmill shows the number of cumulative miles or kilometers logged to date. EFX or AMT shows the number of total strides logged to date. Cycle shows the number of total revolutions logged to date. Climber indicates the number of floors climbed. All HOUR METER The number of hours that the equipment has been in use. T he equipment tracks the elapsed minutes, but the value that appears is truncated to the nearest full hour. All U-BOOT SW Upper board application software part number and version. Note: Some displays show UPPER BOOT SW PART NUMBER . All U-BASE SW Upper base application software version. Note: Some displays show UPPER BASE SW PART NUMBER . All LOWER SW Lower application software version. Note: Some displays show LOWER BASE SW PART NUMBER . 534i, 532i, AMT METRICS BOARD SW PART NUMBER Metrics board software pa rt number and version. AMT STRIDE DIAL SW PART NUMBER Stride dial software part number. All SER. NUMBER The serial number is helpful when you contact Customer Support. You can also find the serial number located on a label on the front hood (treadmills) or optional power receptacl e (self-powered equipment) if one does not appear in the display. Note: Some displays show SERIAL NUMBER . All USAGE LOG The software logs the number of times each program has be en used and displays the as sociated cumulative minutes. The usage log is helpful in determining user preferences in program selection. All ERROR LOG The error log displays any erro r codes that may have been detected by the so ftware. Copy the error code information to paper so you can provide it to Customer Support, if need ed. Be sure to copy it ex actly as shown. Refer to Error Log . Product Owner's Manual: Club Features 16

15. Table 3. Club Programming Mode keys Key Description Function ▲ or ▼ Navigational arrow keys Moves you through the programs and selections. OK OK key Lets you choose or accept the displayed selection. CLEAR Number keypad CLEAR key Returns to the previous menu level without saving any changes. RESET RESET key Exits Club Programming Mode and returns to the Precor banner. Note: The number keypad is disa bled once you enter club programming mode. Use the following flowchart to na vigate through the menu settings. SELECT UNITS SET MAX PAUSE TIME SET MAX WORKOUT TIME RESET, 5, 6, 5, 1, 5, 6, 5 SELECT LANGUAGE OK [ ENGLISH ] [ U.S. ] [ 60 MIN ] [ 120 SEC. ] OK ▼ OK OK ▼ OK OK ▼ ▼ PRECOR SET COOL DOWN TIME [ 5 MIN. ] DIAGS – SET CLUB PARAMETERS OK OK OK Product Owner's Manual: Club Features 12

37. 202530354045505560657075 70 80 90 100 120 130 140 150 160 170 180 190 200 110 Hea r t Rate Ta r get Zo n es Yo ur Hea r t Rate High Peak Ca r dio Fat B urn Wa rmu p Yo ur Age Reco m m e n ded Ca r diovasc u la r Zo n e Reco mm e n ded We ight Loss Zo n e Figure 1: Heart rate target zones y y y y y T he calculation used for the heart rate target zone is: (220 minus your age) multiplied by a percent. For example: Warmup range: (220 minus your age) multiplied by 55% Peak range: (220 minus your age) multiplied by 85% A fter you put on the chest strap, face the display console for a minimum of 15 seconds. This allo ws the receiver in the console to recognize the signal from the chest strap. I f Hr blinks in the HEART RATE disp lay, it is detecting a signal, but has not yet determined your heart rate. Make sure the chest strap is positioned properly ar ound your chest and against your skin. I f you prefer to use the touch-se nsitive grips, grasp both and wait five to ten seconds. Make sure both hands are moist (not dry). W hen a signal is detected, a number flashes in the HEART RATE display and indicates your heart rate. User's Reference Manual: Heart Rate Features 6

66. Table 4. Workout statistics using OPTIONS or METRICS key Equipment Menu Description All % COMPLETE Shows how much of the program goal you have completed. All TIME IN ZONE Displays the total time that your heart rate is within the range of 55% to 84% of your target heart rate. All SEGMENT TIME REMAINING Indicates the amount of time, in minutes and seconds, that remain in the highlighted column of the profile before the next column begins blinking. AMT, climber AVERAGE SPEED Displays the average strides per minute. Treadmills AVERAGE SPEED Displays the average miles or kilometers per hour. The nu mber that appears is determined by dividing the total distance traveled by the elapsed time. All CALS/MIN Displays the approximate number of calories burned per minute. All CALS/HR Displays the approximate number of calories burned per hour. All WATTS Shows your current energy expenditure level. All METS Shows the metabolic units associated with your current energy expenditure level, derived from the calories per minute value and adjusted for your weight. All TARGET HR Shows the current target heart rate setting. All AVG HEART RATE Displays your average heart rate. The number is based on systematic sampling taken while you are exercising. A chest strap will give you a more accurate heart rate average th an if you occasionally use the touch-sensitive grips. If no heart rate reading occurred during your exercise sessio n, an analysis will not appear in the workout summary. AMT STRIDE LENGTH Shows the current length of your stride in inches or centimeters. Climber, treadmills ELEVATION GAIN Presents the cumulative steps (climber) or incline (treadmills) converted into elevation gai ned over the course of the program. Treadmills PACE Displays your target speed in minutes and seconds per mile (or kilometer). For example, the number 4:23 indicates that your pace (speed at which you are moving) is 4 minutes and 23 seconds per mile. All SHOW ALL Presents all the workout statistics in this menu in consecutive order. All OFF Stops scrolling the workout statistics, found in this table, across the message bar. User's Reference Manual: Exercise Session 35

8. Table of Contents Important Safety Instructions............................................1 Safety Approval .............................................................................. 2 Educating Users ............................................................................. 2 Hazardous Materials and Proper Disposal ............................... 2 Product Recycling and Disposal ................................................ 2 Radio Frequency Interference (RFI) ........................................... 3 European Applications .................................................................. 3 Obtaining Service .......................................................................... 4 AMT Safety Features............................................................6 Self-Powered Features........................................................7 Informational Displays Prior to Shutdown................................. 7 Symptoms of a Low Battery......................................................... 8 Using the Optional Power Adapter ............................................ 8 The Optional Power Adapter Kit................................................. 9 Replacing the Battery.................................................................... 9 Club Features.......................................................................10 Club Programming Tips.............................................................. 10 Accessing Club Programming Mode and Changing the Settings................................................................ 11 Choosing a Language................................................................. 13 Selecting a U.S. Standard or Metric Display......................... 13 Setting an Exercise Session Time Limit.................................. 13 Setting a Pause Time Limit ........................................................ 14 Setting a Cool-Down Time Limit .............................................. 14 Informational Displays ................................................................. 15 User ID Entry with CSAFE Equipment.................................... 18 Maintenance.........................................................................19 Daily Inspection ............................................................................ 19 Daily Cleaning............................................................................... 19 Moving the Equipment ................................................................ 19 Storing the Chest Strap ............................................................. 20 Long-Term Storage ..................................................................... 20 Precor Commercial Equipment Limited Warranty.................................................................21 Product Owner's Manual: Table of Contents 5

33. Table of Contents Important Safety Instructions............................................1 Obtaining Service .......................................................................... 1 AMT Features .........................................................................3 Adaptive Motion.............................................................................. 3 Moving Handlebars Support the Total Body Workout .......... 3 Using the Stationary Handrails.................................................... 3 Self-Powered Features ................................................................. 4 Heart Rate Features .............................................................5 Important Use and Safety Information ....................................... 5 Wearing a Chest Strap................................................................. 7 Using the Touch-Sensitive Grips................................................ 8 Using SmartRate ............................................................................ 8 Exercise to Your Target Heart Rate .........................................10 Heart Rate Analysis .....................................................................10 Troubleshooting Heart Rate.......................................................11 Display Console...................................................................12 More Information about the Upper Display ............................14 Stride Length Display ..................................................................15 More Information about the Center Display ...........................15 More Information about the Lower Display ...................>.........16 Keypads..........................................................................................17 Workout Options.................................................................21 Choosing QUICKSTART ........................................................... 22 Selecting a Program.................................................................... 23 Storing Workout Statistics ........................................................ 24 Setting Display Preferences Before Exercising .................... 25 Cooling Down After a Workout ................................................ 26 Pausing During a Workout or the Cool-Down Period ......... 26 Ending a Workout........................................................................ 27 Programs...............................................................................28 Choosing a Program ................................................................... 28 Program Tips................................................................................. 28 Manual Program ........................................................................... 29 Interval Program ........................................................................... 29 Heart Rate Program .................................................................... 30 Fat Burner Program..................................................................... 31 Exercise Session .................................................................32 Changing Programs in Mid-session ........................................ 32 Changing the Workout Time ..................................................... 33 Adjusting Program Goals........................................................... 33 Changing Your Workout Display Options ............................. 34 Changing the Units of Measure................................................ 36 Selecting a Language ................................................................. 36 User's Reference Manual: Table of Contents 2

27. Which best describes this purchase (check all that apply): ❑ First Precor product ❑ Replaces a Precor product of the same type ❑ Replaces same type of product – different brand ❑ Enhancement to equipment already owned How did you FIRST become aware of this product (choose only one): ❑ Authorized Precor dealer ❑ Precor sales representative ❑ Trade show/conference ❑ Internet ❑ News report or product review ❑ Club/fitness magazine advertisement ❑ Trade/consumer magazine article ❑ Other ________________________________________________________ What factors MOST influenced your decision to purchase this product (choose up to three): ❑ Precor reputation ❑ Prior product experience ❑ Design/appearance ❑ Value for the price ❑ Special product features ❑ Warranty ❑ Service ❑ Rebate or sale price TELL US ABOUT YOUR NEW PRECOR PRODUCTS Please indicate the type and number of products purchased: ❑ #: ______ Elliptical Fitness CrossTrainer (EFX ® ) ❑ #: ______ Treadmill ❑ #: ______ Stair Climber ❑ #: ______ Cycle ❑ #: ______ Strength Station ❑ #: ______ StretchTrainer TM Date of Purchase: ❑ Mr. ❑ Mrs. ❑ Ms. Name of Facility Please detach and mail in the warranty registration within ten days of purchase. Contact Person — First Name Zip Code City State How many members do you have? ❑ Less than 100 ❑ 100 – 500 ❑ 500 – 1000 ❑ 1000 – 2000 ❑ 2001 + What percentage of floor space do you allocate for cardio equipment? ❑ 0% to 20% ❑ 20% to 40% ❑ 40% to 60% ❑ 60% to 80% ❑ 80% to 100% What type of equipment makes up your cardio offering (check all that apply)? ❑ Treadmills ❑ Ellipticals ❑ Cycles ❑ Stair Climbers ❑ Rowing Machines ❑ Other _____________ What other brands of cardio equipment do you currently offer (check all that apply): ❑ Life Fitness ❑ Tr u e ❑ Cybex ❑ StarTrac ❑ Other ______________________________ What other Precor equipment do you currently offer (check all that apply): ❑ EFX ❑ Cycle ❑ StretchTrainer TM ❑ Treadmill ❑ Stair Climber ❑ Strength Machine ❑ Other ______________________________ Month Day Year Your Business Email Address Area Code Facility Telephone Number Purchased from (Dealer name) : Product Serial Number(s): Apt./Suite Facility Address The serial number is located on the shipping box and on the product. TELL US ABOUT YOUR FACILITY Last Name TELL US ABOUT YOUR PURCHASE Add additional sheets of paper or register online at www.precor.com/warranty P/N 45622-101 Effective 30 June 2002

Views

  • 134 Total Views
  • 85 Website Views
  • 49 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 9 www.fitness-trader.com
  • 1 fitness-trader.odoo.com
You can compare max 4 products.