0 item

Precor P20 Console RBK 825 Recumbent Bike - Experience Series

Public Channel / Manuals

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

2.

3.

47.

50.

1. Operating and Maintaining the P20 Console Precor Incorporated 20031 142nd Avenue NE P.O. Box 7202 Woodinville, WA USA 98072-4002 P20 Console OM 300753-201, en 28 June 2011

14. 12 Operating and Maintaining the P20 Console

40. 38 Operating and Maintaining the P20 Console

51.

99.

48. Operating and Maintaining the P20 Console Precor Incorporated 20031 142nd Avenue NE P.O. Box 7202 Woodinville, WA USA 98072-4002 P20 Console OM 300753-201 rev B, en 28 June 2011

49. Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Precor Incorporated 20031 142nd Avenue NE P.O. Box 7202 Woodinville, WA USA 98072-4002 RBK 800-Series PAG/OM 300716-201 rev C Warranty #36286-114 14 February 2011

72. 22 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes

84. 34 Assembling and Maintain ing RBK 800 - Series Recumbent Exercise Bikes

100. Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Precor Incorporated 20031 142nd Avenue NE P.O. Box 7202 Woodinville, WA USA 98072-4002 RBK 800-Series PAG/OM 300716-201 rev C Warranty #36286-114 14 February 2011

46. 44 Operating and Maintaining the P20 Console Notes:

98. 48 As sembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes

97. Commercial Cardiovascular Equipment Limited Warranty 47

41. Chapter 5 Programs Preset workouts are a great way to tailor your workouts to your fitness go als, stay challenged, and add variety to your sessions. In the following figures, the elevated areas show the work expenditure for each preset program. Manual In this program, resistance and speed changes are completely under your control. The profile is i nitially a flat line. Any increase or decrease made in one program segment will increase or decrease all remaining portions by the same amount. Figure 8 : Manual

4. Edition Information OPERATING AND MAINTAINING THE P20 CONSOLE P/N 300753 - 201 rev B Copyright © June 2011 Precor Incorporated. All rights reserved. Specifications subject to change without notice . Trademark Note Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners. Intellectual Property Notice All right s, title, and interests in and to the software of the Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award - winning designs of exercise equipment. Precor aggressively seeks U.S. and foreign patents for both the mechanical construction and the visual aspects of its product design. Any party contemplati ng the use of Precor product designs is hereby forewarned that Precor considers the unauthorized appropriation of its proprietary rights to be a very serious matter. Precor will vigorously pursue all unauthorized appropriation of its proprietary rights. Pr ecor Incorporated 20031 142nd Ave NE, P.O. Box 7202 Woodinville, WA 98072 - 4002 1 - 800 - 347 - 4404 http://www.precor.com

15. Chapter 1 Getting Started The P20 console offers administrators and members the ability to set defa ults that meet their specific needs. Activating the Console for Self - Powered Equipment Precor equipment is either self - powered or externally powered using an optional power adapter. Self - powered equipment requires the user exercise to initialize the cons ole. This section provides more detail about powering equipment. Activating the Console for Self - Powered Equipment On self - powered equipment, when a user starts exercising, the console initializes and displays the Welcome banner. A minimum rate of motion must be maintained for the Welcome banner to appear. The words PEDAL FASTER (or the equivalent message depending on the equipment type) appear in the display when the rate of motion drops below the minimum requirements. The equipment saves its battery cha rge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30 - second shutdown process begins. In this mode, the console displays a countdown indicator and ignores all keypresses. If no movement is detected or the rate of motion remains below the minimum, the indicator changes as the countdown continues. Note: The user can resume exercising before the countdown period elapses and the program will continue from the point at which it was paused.

17. Chapter 2 Setting Up the Console Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment. The system settings are:  Odometer Settings  Club Settin gs

52. Edition Information ASSEMBLING AND MAINTAINING RBK 800 - SERIES RECUMBENT EXERCISE BIKES P/N 300716 - 201 rev C Copyright © February 2011 Precor Incorporated. All rights reserved. Specifications subjec t to change without notice. Trademark Note Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners. Intellectual Property Notice All rights, title, and interests in and to the software of the Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or i ts suppliers, as the case may be. Precor is widely recognized for its innovative, award - winning designs of exercise equipment. Precor aggressively seeks U.S. and foreign patents for both the mechanical construction and the visual aspects of its product des ign. Any party contemplating the use of Precor product designs is hereby forewarned that Precor considers the unauthorized appropriation of its proprietary rights to be a very serious matter. Precor will vigorously pursue all unauthorized appropriation of its proprietary rights. Precor Incorporated 20031 142nd Ave NE, P.O. Box 7202 Woodinville, WA 98072 - 4002 1 - 800 - 347 - 4404 http://www.precor.com

92. 42 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Replacing the Battery The equipment ’ s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service . CAUTION: The battery stored inside the equipment contains hazardous materials and must be disposed of according to Hazardous Waste Regulations. Refer to Hazardous Materials and Proper Disposal .

42. 40 Operating and Maintaining the P20 Console In terval 1 - 1 and Interval 1 - 2 The Interval programs are primarily for conditioning your cardiovascular system. These programs are designed to raise and lower your heart rate in a repeating fashion for a user - defined period of time by alternating rest and wor k intervals. Program intensity is adjustable. Figure 9 : Interval 1 - 1 Figure 10 : 1 - 2 Interval Weight Loss The program time is fixed at 28 minutes. The program consists of four intervals, each lasting eight minutes. You can change the resistance at any time during the work interval. Figure 11 : Weight Loss

43. Programs 41 Basic Heart Rate Control This program computes your target heart rate based on the calculation, 60% of 220 minus your age. The equipment adjusts resistance and/or inclin e to maintain your target heart rate while you work out. When a heart rate signal is not received, a heart shape with a question mark appears in the upper text display. Recheck your hand grip on the handheld sensors or the placement of your chest strap. Figure 12 : Basic HRC Note: For the unit to detect your heart rate, you must grip the handheld heart rate sensors or wear a chest strap while exercising. In the pr esence of both handheld and wireless data, the handheld data takes precedence and displays. Hill Climb This preset program simulates hill climbing. The program is fixed at 30 minutes on most equipment, and the resistance is predetermined. Any increase or d ecrease made in one program segment will increase or decrease all remaining portions by the same amount. Figure 13 : Hill Climb

56. 6 Assembling and Maintaining RBK 800 - Series Recumbent Exercise B ikes Hazardous Materials and Proper Disposal The batteries within self - powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Pro ducts Customer Support for information regarding battery removal. Refer to Obtaining Service . Product Recycling and Disposal This equipment must be recycled or discarded according to applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the framework for the return and recycling of used equipment as applicable throughout the European Union. The WEEE label indicates that the product i s not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of li fe. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and recovery of WEEE. Customer parti cipation is important to minimize any potential effects of EEE on the environment and human health due to the potential presence of hazardous substances in EEE. For proper collection and treatment, refer to Obtaining Service . Regu latory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio - frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between - 20ºC an d 85°C ( - 4°F and 185°F).

78. 28 Assembling and Maintain ing RBK 800 - Series Recumbent Exercise Bikes Connecting the Heart Rate Sensor Cable The heart rate sensor cable passes through the cutaway opening at the upper left corner of the back plate, then down to the small circuit board at the lower left of the console. The following illustration shows how the cable should look once it is installed. Figure 13 : Connecting the heart rate cable Connecting the Power Cable Like the tuner, the console ’ s upper circuit board is equipped with a cable adapter that relieves you of attempting to attach a cable to a recessed jack. To connect the power cable, route it through the cutaway op ening at the upper left corner of the back plate and plug it in to this adapter. The following illustration shows how the cable should look once it is installed. Figure 14 : Connecting the power cable

16. 14 Operating and Maintaining the P20 Console Optional Use of the Power A dapter An optional AC power adapter provides sustained power to the equipment. This adapter allows you to change settings without having to pedal the equipment. To purchase the power adapter, contact your dealer. If you purchase the optional power adapter, you must also purchase the internal cable kit. The kit supplies the cable, bracket, and fasteners that connect the power adapter to the lower electronics board. CAUTION: The internal cable kit must be installed by authorized service personnel. Do not atte mpt installation on your own as you could void the Precor Limited Warranty. For more information, refer to Obtaining Service . Important : If this equipment includes a P80 console, the optional power adapter and the internal cable ki t must still be installed to provide continuous power to the base unit and support its internal battery. Once the internal cable kit is installed, you can plug the optional power adapter into the equipment. Plug the opposite end into the appropriate power source for your equipment (120 V or 240 V). Review the safety instructions found at the beginning of this manual before using the power adapter. CAUTION: When the optional power adapter is in use, make sure that the power supply cord does not create a safe ty hazard. Keep it out of the way of traffic and moving parts. If the power supply cord or power conversion module is damaged, it must be replaced. The control console functions differently when the power adapter is connected. Because the power adapter pro vides a constant source of power, a user can pause for brief periods without initiating shutdown procedures. When the pause time limit expires and the user has not resumed exercising, the console returns to the Welcome screen. The default pause time is 30 seconds for all fitness equipment. Refer to the manual for your control console for instructions on setting or changing the pause time limit.

5. Important Safety Instructions This apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise eq uipment (hereinafter referred to as the base unit). It is not packaged for individual sale. WARNING To prevent injury, the console must be attached securely to the base unit following all assembly and installation instructions shipped with the base unit. T he console is intended to be connected to AC mains power through the furnished power supply ONLY. It should be powered on only when installed as described in the assembly and installation instructions shipped with the base unit. The console is intended for use only with Precor fitness equipment, not as a standalone device. Safety Precautions Read all instructions in the documentation provided with your exercise equipment before installation of this device including all assembly guides, user guides, and own er ’ s manuals. Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety not ices. These precautions include the following:  Read all instructions in this guide before installing and using the equipment and follow any labels on the equipment.  Make sure all users see a physician for a complete physical examination before they begin a ny fitness program.

38. 36 Operating and Maintaining the P20 Console Paused (Externally Powered Equipment) When you interrupt your workout, the words WORKOUT PAUSED - PRESS GO TO CONTINUE scroll across the text dis play. The accumulated metrics (Time, Calories, Distance, and Average Speed) hold their current values and do not change. To restart the program, press GO . If the equipment remains inactive for more than the maximum pause time, it displays the Summary scre en with your workout metrics. After displaying the summary, it returns to the Welcome screen. Pending Shutdown (Self - Powered Equipment) When you interrupt your workout, the words WORKOUT PAUSED - PEDAL TO CONTINUE scroll continuously across the text displa y. It also displays the number of seconds remaining until the equipment shuts down. To restart the program during the countdown, begin pedaling. If the equipment remains inactive for more than the maximum pause time, it displays the Summary screen with you r workout metrics. Ending a Session Cooling down is an important aspect of your workout because it helps reduce muscle stiffness and soreness by transporting excess lactic acid out of the working muscles. In addition, a five minute cool down allows your heart rate to return to its normal, resting state. At the end of your workout, a Summary screen displays your average heart rate during your workout and your accumulated workout metrics.

44. 42 Operating and Maintaining the P20 Console Cross Country The purpose of the preset program is to simulate an outdoor running experience. In this case, you can change the overall profile or intensity of the program (resistance) at any time; however, you cannot change the shape of the preset "hills" and "valleys" you see depicted on the display. Figure 1 4 : Cross Country Random Every time this program is selected, a different program profile appears. The one - minute segments that appear i n the program profile maintain a set resistance that you can override. The Random program has a default time limit, or you can press STOP to complete your program sooner. Aerobic This program is similar to an Interval program. You can set a length of time for your fitness session and you can specify the speed and the incline or resistance. Figure 15 : Aerobic

80. 30 Assembling and Maintain ing RBK 800 - Series Recumbent Exercise Bikes 3. Rest the console on the console mount so that the notch on the bottom of the console ’ s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 15 : Console positioning on base unit 4. Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so. 5. Pull all cables upward and f orward until you can drape them over the top of the console ’ s back plate.

28. 26 Operating and Maintaining the P20 Console Equipment Value Default Value Value Range Value Change Increments Treadmill Quick Start course segment 1 minute Treadmill Max incline 15 percent incline 0 - 15 percent 0.5 percent Treadmill Mi d - session change timeout 5 seconds None Climber Steps per minute 30 - 80 5 EFX Max CrossRamp 20 1 - 20 1

73. Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and con nector locations whenever possible. The installation sequence for any of them is as follows:  Threading the cable assembly  Connecting cables  Completing the installation (tightening the mounting screws and attaching the back cover) The following sections des cribe how to perform these tasks. Threading the Cable Assembly (P80) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up the back plate on t he console with the console mount, you must make sure that the cable assembly passes correctly through the openings in both components.

12. 10 Operating and Maintaining the P20 Console Electrical Recommendations: All Equipment E xcluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected. If the branch circuit has any other devices plugged into the circuit the number of screens must be reduced by the wattage of the other devices. Note: The typical splitter power cords that have IEC - 320 C13 and C14 plugs have a recommended maximum capacity of five screens. Figure 3 : IEC - 320 C13 and C14 plugs Obtaining Service Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com. F or the most current manuals, go to http://www.precor.com .

57. Important Safety Instructions 7 Radio Frequency Interference (RFI) The RFID module conforms to the following national standards defining acceptable limits for radio frequency interference (RFI). Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. The equipment generates, u ses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual instructions, can cause harmful interference to radio communications. Operation is subject to the following two conditions: (1) this device ma y not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING Per FCC rules, changes or modifications not expressly approved by the manufacturer could void th e user’s authority to operate the equipment. Industry Canada This device complies with RSS - 210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES - 003. Cet appareil numérique de la classe A est conforme à la norme NMB - 003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer

77. Installing the Console 27 The following illustration shows how the cable is positioned once it is installed. Figure 11 : Connecting the television cab le Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is importa nt to exercise caution when connecting the cables. The black Ethernet cable connects to a jack just underneath the perforated metal bracket at the very top of the opening in the console. The gray base unit data cable connects to a lower jack closer to the back plate. Refer to the following illustration for the correct position of both cables. CAUTION : If you connect the base unit data cable to the wrong jack, the equipment will not function. Figure 12 : Connecting the Ethernet and base unit data cables

89. Chapter 4 Self - Powered Features Important : This chapter of the manual describes Precor fitness equipment that can operate without being connected to AC power. This includes units equipped with P40 or P20 consoles. Howeve r, P80 consoles must be connected to AC power through their power supplies to operate. For this reason, this chapter does not apply to units equipped with P80 consoles. On self - powered equipment, the system initializes and displays the Welcome screen when a user starts exercising. A minimum rate of motion must be maintained for the banner to appear, as shown in the following table. When a person meets the requirements, the power that is generated allows the equipment to function properly. Table 4. Minimum requirements for operation Equipment Rate of Motion AMT 56 strides per minute (SPM) EFX 40 strides per minute (SPM) Climber 30 steps per minute Bike 20 revolutions per minute (RPM) Informational displays appear when the battery is low or when the rate of motion drops below the minimum requirements. The display explains what to do to retain power. If the messages are ignored, the equipment begins shutdown procedures to maintain the charge of the battery. Refer to Informational Displays Prior to Shutdown . An optional power adapter can be purchased and provides sustained power to the equipment. If you plan to change the club settings, the power adapter is highly recommended. To purchase the optional power ad apter, check with your dealer. Refer to Obtaining Service .

18. 16 Operating and Maintaining the P20 Console Identifying Parts of the Console The following diagram provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4 : P20 Console Display Note: Some equipment has both an intensity (resistance) indicator and an incline indicator. Other equipment may only have one type of indicator. Table 1. Part s of the P20 console display Number Part Name Details Upper text display Scrolls information to guide the user Lower text display Displays graphical info rmation about your workout progress SmartRate® and Heart Rate icon SmartRate® displays a range of heart rate intensity to the user. The heart - shaped icon pulses in sync with the detected heartbeat .

60. 10 Assembling and Maintaining RBK 800 - Series Recumbent Exercise B ikes Electrical Recommendations: All Equipment Excluding Treadmills Note : This is a recommendation only. NEC (National Elec tric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected. I f the branch circuit has any other devices plugged into the circuit the number of screens must be reduced by the wattage of the other devices. Note : The typical splitter power cords that have IEC - 320 C13 and C14 plugs have a recommended maximum capacity of five screens. Figure 1 : IEC - 320 C13 and C14 plugs Obtaining Service Do not attempt to service the equipment except for maintenance tasks. If any items are missin g, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com . O btaining Updated Documentation Current documentation for Experience Series consoles and Preva Networked Fitness software is available at http://www.precor.com/productmanuals . You may want to check in for updated information from time to time as the univers e of Preva features expands.

85. Chapter 3 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect t he equipment from its power source before cleaning it or performing any maintenance tasks. If the equipment is self - powered but also uses the optional power adapter, disconnect the adapter. Daily Cleaning Precor recommends that you clean the equipment b efore and after each exercise session. To remove dust and dirt from the equipment, wipe all exposed surfaces with a soft cloth that you have moistened with one of the following cleaners:  A solution of 30 parts of water to 1 part of Simple Green® (for more information, visit www.simplegreen.com )  ENVIR - O - SAFE oxygen enhanced cleaner or multi - task cleaner concentrate, diluted according to the manufacturer ’ s instructions (for more information, visit www.daleyinternational.com )

30. 28 Oper ating and Maintaining the P20 Console To use the touch heart rate feature, place the palm of your hands directly on the metal heart rate sensors on the equipment ’ s handlebars. To ensure a more accurate heart rate readout, make sure you follow thes e tips:  Both hands must grip the sensors for your heart rate to register.  It takes a number of consecutive heart beats (15 - 20 seconds) for your heart rate to register.  When gripping the sensors, do not grip tightly. Keep a loose, cupping hold. Holding th e grips tightly can affect the reading.  As you work out, your perspiration will help transmit your heart rate signal. If you have difficulty using the handheld grips to determine your heart rate, try the sensors again later in the workout to see if you ca n obtain a heart rate signal.  If the touch heart rate feature does not work for you, Precor recommends that you use a chest transmitter strap. Figure 5 : Heart rate t arget zones CAUTION: Your heart rate should never exceed 85% of your maximum aerobic heart rate. Your maximum heart rate is equal to 220 minus your age.

91. S elf - Powered Features 41 Using the Optional Power Adapter After connecting the power adapter to the equipment, plug the opposite end into the appropria te power source (120 V or 240 V). CAUTION: When the optional power adapter is in use, make sure that the power supply cord does not create a safety hazard. Keep it out of the way of traffic and moving parts. If the power supply cord or power conversion mod ule is damaged, it must be replaced. The control console functions differently when the power adapter is connected. Because the power adapter provides a constant source of power, a user can pause for brief periods without initiating shutdown procedures. Wh en the pause time limit expires and the user has not resumed exercising, the console returns to the Welcome screen. The default pause time is 30 seconds for all fitness equipment. Refer to the manual for your control console for instructions on setting or changing the pause time limit. To learn how to install the power adapter, refer to The Optional Power Adapter Kit . The Optional Power Adapter Kit If you purchase the optional power adapter, you must also purchase the internal cabl e kit. The kit supplies the cable, bracket, and fasteners that connect the power adapter to the lower electronics board. CAUTION: The internal cable kit must be installed by authorized service personnel. Do not attempt installation on your own as you could void the Precor Limited Warranty. For more information, refer to Obtaining Service . Important : If this equipment includes a P80 console, the optional power adapter and the internal cable kit must still be installed to provide cont inuous power to the base unit and support its internal battery. Once the internal cable kit is installed, you can plug the optional power adapter into the equipment. Plug the opposite end into the appropriate power source for your equipment (120 V or 240 V ). Review the safety instructions found at the beginning of this manual before using the power adapter.

33. Introducing Users to the P20 Console 31 If the restart switch trips during exercise, pe rform the following steps: 1 . Reattach the safety clip if necessary. 2 . Press the restart switch down until it clicks, returning it to its normal position. Note: If the restart switch trips, all information about the current workout is deleted. 3 . Start the workou t from the beginning, reducing the time as needed to account for the amount of exercise that has been completed. Figure 7 : Attaching the safety clip Treadmill A uto St op™ (Automatic Stop) Function Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON. The Auto Stop™ (Automatic Stop) feature is designed to bring th e treadmill to a gradual stop when it is not in use. This might occur if a user steps off the treadmill before the end of a workout and leaves the treadmill running. Sixty seconds after a treadmill workout starts or resumes, the equipment begins Auto Stop monitoring. If a user is detected, then no message appears, and the selected workout continues.

75. Installing the Console 25 Connecting Cables (P80) After the console has been seated, separate the individua l cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Figure 10 : Cable connections, P80 console Table 1. P80 internal cable connections Cable Connector Type Circuit Connector Location Ethernet (LAN) Eight - contact modular, on round black cable TV in F - type coaxial Power Two - contact plug, polarized and latched Data from base unit Eight - contact modular, on fl at gray cable

70. 20 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes 6. Insert the two upright support mounting screws through the openings on th e support and into the screw holes on the body assembly. Tighten the mounting screws completely using a ³₈ - inch hex wrench. Figure 7 : Bolting the upright support into p lace Important: In the following two steps, be extremely careful not to trap or pinch any of the cables between the bike frame and any of the covers. 7. Reposition the left side cover on the body assembly, then reattach and tighten the #10 x 1 - inch self - tappi ng screws holding it in place. 8. Repeat the previous step to reinstall the rear and top covers.

9. Important Safety Instructions 7 In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be c ollected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and recovery of WEEE. Customer participation is important to minimize any potential effects of EEE on the environment and human health due to the potential presence of hazardous substances in EEE. For proper collection and treatment, refer to Obtaining Service . Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardio vascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards. Cardiovascular Type Equipment:  CAN/CSA, IEC, EN 60335 - 1 (Household and similar electrical appliances - Safety)  EN 957 (Stationary train ing equipment, class S/B compliant equipment) Radio Frequency Interference (RFI) This Precor exercise equipment conforms to the following national standards defining acceptable limits for radio frequency interference (RFI). Federal Communications Commiss ion, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial inst allation. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual instructions, can cause harmful interference to radio communications.

11. Important Safety Instructions 9 Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Elec tric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch cir cuit that can be shared only with one PVS. If you need additional help with the power connections contact your Precor authorized dealer. Important: An individual branch circuit provides a hot conductor and neutral conductor to a receptacle. The conductors must not be looped, "daisy - chained", or connected to any other conductors. The circuit must be grounded according to NEC guidelines or local region electric codes. Figure 1 : North American 120 - volt, 20 - amp power receptacle Figure 2 : North American 240 - volt, 20 - amp power receptacle

29. Chapter 3 Introducing Users to the P20 Console CAUTION: Before beginning any fitness program, see your physic ian for a thorough physical examination. Seek advice from your physician to learn the target heart rate appropriate for your fitness level. The P20 console offers an easy - to - follow display and multiple programs to help people meet their exercise needs. The sensitive keypad lets them select data and control their workout session and SmartRate® provides a visual aid that monitors heart rate and workout intensity at a glance. Important: Please review the following sections in this guide with your users before allowing them to use the fitness equipment:  Important Safety Instructions  Getting Started  Using the Safety Clip (for treadmill only) Using the Touch Heart Rate Feature Note: Touch heart rate performance may vary based on a user’s physiology, fitness level , age, and other factors. You may experience an erratic readout if your hands are dry, dirty, or oily, or if the skin on your palms is especially thick. Wearing hand lotion can also cause an erratic readout. In addition, make sure that the sensors are clea n to ensure proper contact can be maintained.

32. 30 Oper ating and Maintaining the P20 Console Using the Treadmill Safety Clip The treadmill is equipped with two different stop functions, which behave as follows: If the user ... Then the treadmill belt ... And the console ... Presses down on the red STOP button Slows to a stop Shows that the exercise workout is paused Pulls on the lanyard attached to the safety clip and trips the restart switch Slows to a stop Shows the words PUSH TO RESET SWITCH and an arrow pointing to the Restart switch The restart switch is located just below the console and immediately behind the red STOP button, as shown in the following illu stration. When it is tripped, the bar pops up, displaying the words PUSH TO RESET SWITCH on its front side. The treadmill does not operate while these words are visible. Figure 6 : Restart switch Instruct users on how important it is to use the safety clip while exercising on the treadmill, and demonstrate how they should attach it to their clothing near the waistline.

68. 18 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes 3. Remove the three #10 x 1 - inch self - tapping screws holding the rear cover in place, then lift it off. Figure 4 : Rear cover removal 4. Remove the three #10 x 1 - inch self - tapping screws holding the left side cover in place, then pull the cover away from the body assembly. Guide the cover around the pedal crank, then remove it and set it aside. Figure 5 : Left side cover removal 5. Remove the tape holding the base unit data cable and the heart rate sensor cable in place inside the upright support channel. 6. Slide the jack panel up and out of its bracket in the right side cover.

87. Maintenance 37 Quarterly Maintenance Precor recommends that you clean and inspect the equipment more thoro ughly once every three months. To perform quarterly maintenance: 1. Remove the cover panels. 2. Vacuum out any debris, being careful not to bring the vacuum cleaner nozzle too close to any circuit board (unless your vacuum cleaner is protected against static bui ldup). 3. Check the tension of both belts. 4. Replace the cover panels. 5. Wipe the exterior of the console with a damp sponge or soft cloth, and dry with a clean towel. Keep water away from electronic components to prevent electrical shock or damage. 6. Clean the tou chscreen using a soft, lint - free cloth dampened with a 91% isopropyl alcohol solution (either full strength or diluted with an equal amount of water). Storing the Chest Strap If you purchased the optional heart rate chest strap, store it in a place where it remains free of dust and dirt (for example, in a closet or drawer). Be sure to protect the chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F (0° C). To clean the chest strap, use a spong e or soft cloth dampened in mild soap and water. Dry the surface thoroughly with a clean towel.

67. Assembling the E xercise Bike 17 To attach the bottle holder: 1. Position the bottle holder so that it wraps around the seat back assembly and rests on the tab on the back of the assembly. The front edges of the bottle holder should rest on the han dlebars and the two snap - in tabs should line up with the small rectangular holes on the seat back assembly. 2. Press the bottle holder forward until it locks into place. Installing the Upright Support and Cables DANGER Do not attempt to connect electrical po wer until all assembly procedures are complete and the console is properly installed. Before you begin this procedure, retrieve the cables for the console that you plan to install on this exercise bike. The cables are packed with the console. Note: You wi ll need the help of another person while performing the procedure. To prepare the bike for installation of the upright support: 1. Retrieve the cables from the box in which the console was shipped. 2. Using a #2 Phillips screwdriver, remove the two #10 x 1 - inch self - tapping screws holding the top cover in place, then lift it off. Lift the cover from its front edge first, then disengage its plastic tabs from the recesses on the rear cover into which they fit. Figure 3 : Top cover removal

90. 40 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30 - second shutdown process begins. In this mode, the console displays a countdown indicator and ignores all keypresses. If no movement is detected or the rate of motion remains below the minimum, the indicator changes as the countdown continues. Note: Th e user can resume exercising before the countdown period elapses and the program will continue from the point at which it was paused. Important: If the equipment is connected to a CSAFE master device, it follows a slightly different shutdown process. Ten s econds before the equipment shuts down, it ends the exercise session and displays a reset message while it disconnects from the CSAFE master device. It ignores all keypresses during these last ten seconds. Symptoms of a Low Battery If no one has used the equipment for an extended period of time, the battery may need recharging. Symptoms of a low battery include the following:  A flickering or erratic display  Loss of user and program information after the user stops exercising, without any display of a worko ut summary or a notification of pending shutdown Important: To maintain a constant power source, use the optional power adapter.

34. 32 Oper ating and Maintaining the P20 Console If no user is detected after an additional 30 seconds, the console displays the message NO USER DETECTED, STOPPING IN 10 SECONDS as notification of the pendin g stop. During the display of this message, a ten second countdown begins. If a user does not override the countdown, the belt comes to a gradual stop after the countdown is complete. Note: Users weighing more than 90 pounds (41 kg) are detected within the speed and position limits of the feature. Users weighing 50 pounds (22.7 kg) to 89 pounds (40.5 kg) may not be detected depending on their speed and location. Always be aware of and follow the console’s instructions for proper operation. Using SmartRate® The Precor SmartRate® technology is a precise, easy - to - read heart rate monitor that helps users achieve their best personalized workouts. SmartRate displays actual heart rate information in relation to the user ’ s target zone for weight loss and cardiovasc ular training. This feature is visible during all workouts. In addition, some equipment includes a Heart Rate Control (HRC) workout that automatically adjusts intensity to keep a user ’ s heart rate in its target zone. For more information, refer to P rograms . CAUTION: Before beginning any fitness program, see your physician for a thorough physical examination. Seek advice from your physician to learn the target heart rate appropriate for your fitness level. To test your heart rate: 1 . Begin a workout by pressing QUICK START , or by selecting a preset workout followed by pressing GO . 2 . Grasp the handheld heart rate sensors with both hands. Depending on the type of equipment, the letters " Hr" appear, or a blinking heart displays while the equipment reads your heart ra te. After a few moments, your heart rate displays in beats per minute. The blinking segments in the SmartRate field indicate the current zone of your heart rate: Warm Up, Fat Burn, Cardio, or High.

31. Introducing Users to the P20 Console 29 Using a Chest Strap Transmitter WARNING Signals used by the Chest Strap Transmitter (or heart rate str ap) may interfere with pacemakers or other implanted devices. Consult your physician and the manufacturers of your Chest Strap Transmitter and implanted device before using a Chest Strap Transmitter. Wearing a chest strap transmitter during your workout p rovides steady heart rate information. For the equipment to detect your heart rate, you must grip the touch heart rate sensors or wear a chest strap transmitter while exercising. In the presence of both touch and wireless data, the touch data takes precede nce and will display. Note: To receive an accurate reading, the strap needs to be in direct contact with the skin on the lower sternum (just below the bust line for women). To use a chest strap transmitter: 1 . Carefully dampen the back of the strap with tap w ater. Important: Do not use deionized water. It does not have the proper minerals and salts to conduct electrical impulses. 2 . Adjust the strap and fasten it around your chest. The strap should feel snug, not restrictive. 3 . Make sure that the chest strap is rig ht - side - up, lies horizontally across, and is centered in the middle of your chest. 4 . Test the chest strap placement by checking the heart rate function on the equipment. If a heart rate is registering, your chest strap placement is correct. If the equipment does not register a heart rate, readjust the strap and recheck the heart rate function.

74. 24 Assembling and Maintain ing RBK 800 - Series Recumbent Exercise Bikes Important : Before you begin the following procedure, remove the rear cover from the control console. To remove the cover , use your fingernails to pry the lower edge loose, then swing the cover up and out as shown in the following illustration. Figure 8 : Removing the access cover from the P80 console To thread the cable assembly: 1. Make sure that as much of each cable as possible passes through the opening in the middle of the console mount on the base unit. 2. Position the console over the console mount. 3. Rest the console on the console mount so th at the notch on the bottom of the console ’ s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 9 : Console positioning on base unit 4. Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so.

81. Installing the Console 31 Connecting Cables (P30) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Figure 16 : Cable connections, P30 console Table 2. P30 internal cable connections Cable Connector Type Circuit Connector Location Safety key (treadmills only) Six - contact strip, keyed Auto Stop sensor (treadmills only) Four - contact strip, keyed Data from base unit Eight - contact modular, on flat gray cable Heart rate sensors Four - contact strip, keyed

95. Commercial Cardiovascular Equipment Limited Warranty 45 This Limited Warranty shall not apply to: 1. Software version upgrades. 2. Software defects that do not materially and negatively affect the normal performance of the product under normal conditions of use. 3. Consumable goods or cosmetic items of the product, the exterior of which has been damaged or defaced as a result of abuse, misuse, accident, improper service or installation, mishandling, or modification in design or construction not authorized by Precor. 4. Repairs performed on Precor equipment missing a serial number or with a seria l tag that has been altered or defaced. 5. Service calls to correct installation of the equipment or instruct owners on how to use the equipment. 6. Pickup and delivery involved with repairs. 7. Any labor costs incurred beyond the applicable labor warranty period. Disclaimer and Release. The warranties provided herein are the exclusive warranties given by Precor and supersede any prior, contrary or additional representations, whether oral or written. ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS. PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. PRECOR ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY NONC ONFORMANCE OR DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED TO: (A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR OR ITS SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED); AND (B) ANY OBLIGA TION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer and release shall apply even if the express warranty set forth above fails of its essential purpose. Exclusive Remedies. For any product described above that fa ils to conform to its warranty, Precor will provide, at their option, one of the following: (1) repair; (2) replacement; or (3) refund of the purchase price. Precor Limited Warranty service may be obtained by contacting the authorized dealer from whom you purchased the item. Precor compensates Servicers for warranty trips within their normal service area to repair commercial equipment at the customer’s location. You may be charged a trip charge outside the service area. THESE SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY BREACH OF WARRANTY.

71. Assembling the Exercise Bike 21 Making Sure the Unit Is Stable Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor. To level the unit: 1. Gently rock the unit. If there is any movement, ask your assistant to tip the unit to one side while you locate the adjustable feet. 2. Correct the height of each adjustable foot as follows. If you want to ... Then t urn the adjustable feet ... Raise the unit Counterclockwise Lower the unit Clockwise Important : Place the unit on a flat surface. Rotating the adjustable feet cannot compensate for extremely uneven surfaces. When you are finished adjusting the unit, place the unit on the floor and recheck that it is level. Breaking in the Equipment Precor equipment does not require an actual break - in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shi pped. This can cause the equipment to operate with a small amount of roughness or noise when it starts up for the first time. The equipment usually returns to smooth operation after a day or two of normal use. If it does not, contact your dealer for assist ance. For more information, refer to Obtaining Service .

82. 32 Assembling and Maintain ing RBK 800 - Series Recumbent Exercise Bikes Connecting Cables (P20) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to ide ntify the cables and connectors. Figure 17 : Cable connections, P20 console Table 3. P20 internal cable connections Cable Connector Type Circuit C onnector Location Data from base unit Eight - contact modular, on flat gray cable Heart rate sensors Four - contact strip, keyed Safety key (treadmills onl y) Six - contact strip, keyed Auto Stop sensor (treadmills only) Four - contact strip, keyed

22. 20 Operating and Maintaining the P20 Console Event Number Description o f Event 22 No motor pulses at start up 23 Motor pulses missing after start up 24 Reduce speed requested, speed is not reducing 26 Motor pulse width incorrect 27 Too much drive motor current 28 Temperature too high 29 Excessive AC input current 30 Commu nications event lower board to upper board 31 Incorrect Communications event upper board to lower board 32 Communication event upper board to lower board 33 Incorrect communications event lower board to upper board 40 Lift motion detected 42 Lift pos ition value out of range 43 Zero switch not found 44 Un - commanded lift motion 45 Lift going in the wrong direction 50 Too much brake (magnet) current 53 Cannot read target, cannot find home switch 54 Target pulses lost during operation 55 Brake h ome switch activated unexpectedly 60 Auto Stop sensor failure (treadmill) 61 Auto Stop not present (treadmill) Hour Meter Tracks the number of hours that a piece of equipment has run. The equipment also tracks elapsed minutes, but the value that display s is rounded up the nearest full hour.

88. 38 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Moving the Equipment The equipment is very heavy. If you plan to move it to a new location, obtain the help of an adult assistant and use proper lifting techni ques. If the equipment includes roller wheels on one end, use the wheels to reduce the load on yourself and your assistant. To move the exercise bike: 1. Disconnect, unplug, and remove all external connections (television, Ethernet, and power). 2. Lift the rear feet to tip the bike forward onto its roller wheels. 3. Push the bike into its new location. 4. Lower the rear feet to the floor. Long - Term Storage If you do not expect anyone to use the equipment for a long time, perform the following tasks to prepare it for s torage:  If it has a power cord, disconnect the cord.  If it has an optional power adapter, connect the adapter to prevent damage to the internal battery.  Position it so that it will not become damaged and will not interfere with people or other equipment.

53. Important Safety Instructions Read the following precautions thoroughly before you begin assembly, and save them afterward for future reference. Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read thes e sections and observe all safety notices. These precautions include the following:  Read all instructions in this guide before installing and using the equipment and follow any labels on the equipment.  Make sure all users see a physician for a complete phy sical examination before they begin any fitness program.  Il est conseillé de subir un examen médical complet avant d ’ entreprendre tout programme d ’ exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement.  Do not all ow children, or people unfamiliar with the operation of this equipment, on or near it. Do not leave children unsupervised around the equipment.  Make sure all users wear proper exercise clothing and shoes for their workouts and avoid loose or dangling cloth ing. Users should not wear shoes with heels or leather soles, and they should check the soles of their shoes to remove any dirt and embedded stones. They should also tie long hair back.  Never leave the equipment unattended when it is plugged in. Unplug the equipment from its power source when it is not in use, before cleaning it, and before providing authorized service. Note: The optional power adapter is considered a power source for self - powered equipment.

94. 44 As sembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Options / Accessories Many options or accessories have components that are connected internally or mounted inside the electronic console. The following guidelines determine the warranty for these components. If the internal components are installed by the factory o r by an authorized dealer as part of the original sale and delivery, they have a warranty that is identical to the warranty of the equipment in which they are connected or mounted. If the internal components are not installed by the factory or by an author ized dealer as part of the original sale and delivery, they have a 90 days parts and labor limited warranty. All components that are not internally connected have a 90 days parts only limited warranty. Satisfactory proof of purchase is required in all case s. Conditions and Restrictions. This warranty is valid only in accordance with the conditions set forth below: 1. The warranty applies to the Precor product only while a. it remains in the possession of the original purchaser and proof of purchase is demonstrate d. b. it has not been subjected to accident, misuse, abuse, improper service, or non - Precor modification. c. claims are made within the warranty period. 2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with e lectrical codes or Precor owner’s manual specifications, or failure to provide reasonable and necessary maintenance as outlined in the owner’s manual. 3. Precor is not responsible for Internet connectivity to its products. This restriction applies to services , such as those provided by an Internet service provider (ISP), and also to hardware related to Internet connectivity, such as Ethernet cabling, routers, servers and switches. 4. Precor is not responsible for the quality of television, video, audio, or other media supplied to its products. This restriction applies to services, such as those provided by a cable or satellite television provider; to signal strength and clarity; and also to hardware related to the reception and delivery of television, video, audio , and other media. Such hardware can include (but is not limited to) audio, video, and radio - frequency (RF) cabling, connectors, receivers, modulators, combiners, distribution amplifiers, splitters, and so on. 5. Precor cannot guarantee that the heart rate me asurement system on its products will work for all users. Heart rate measurement accuracy varies based on a number of factors, including the user’s physiology and age, the method in which the heart rate measurement system is used, external interference, an d other factors that may influence heart rate acquisition. 6. Except in Canada, Precor does not pay labor outside the United States. 7. Warranties outside the United States and Canada may vary. Please contact your local Dealer for details.

26. 24 Operating and Maintaining the P20 Console Safety Code (Treadmill) The Safety Code feature prevents use of the treadmill until a password is entered. Select Enable to use this feature and press the following keys in the order presented. Programs Enter Input Down Input Up When the sa fety code is enabled, the display will be in the Welcome state until a key is pressed. If a key is pressed, the word PASSWORD? appears in the display. If a password is not entered within two minutes, the equipment resets to the Welcome banner. Table 3. Equipment values and their associated ranges Equipment Value Default Value Value Range Value Change Increments All Workout program Manual All Weight (lb) 150 pounds 50 - 350 pounds 1 pound All Weight (kg) 68 kilograms 23 - 160 ki lograms 1 kilogram All Age 35 years old 15 - 99 years 1 year All Workout time 30 minutes 1 - 90 minutes 1 minute (data entry) / 1 second (measurement) All Maximum pause time 120 seconds (treadmill) 30 seconds (EFX, bike, AMT) 1 - 120 seconds All Tar get heart rate 130

76. 26 Assembling and Maintain ing RBK 800 - Series Recumbent Exercise Bikes Cable Connector Type Circuit Connector Location Heart rate sensors Four - contact strip, keyed Safety key (treadmills only) Six - contact strip, keyed CSAFE Eight - contact modular, on flat gray cable Auto Stop sensor (treadmills only) Four - contact strip, keyed To simplify installation and maint enance, route and connect cables 1 through 5 according to the following instructions. Note: In the illustrations in this section, some cables are omitted for the sake of clarity. Connecting the Television Cable The console ’ s television tuner is mounted ins ide the console ’ s back plate. The tuner includes a short cable adapter that allows the television cable to be connected outside the back plate. To connect the television cable: 1. Pull the cable out through the lower right corner of the back plate. 2. Route the cable counterclockwise around the outside of the back plate. 3. Attach the connector on the cable to the connector on the tuner cable and tighten the two connectors securely using two ⁷₁₆ - inch open - end wrenches. Position both connectors above the upper righ t corner of the back plate. 4. Use a plastic tie to secure the connectors to the top of the back plate. Pass the tie through the two small holes near the upper right corner of the back plate, then wrap it around the connectors and tighten it securely. Cut off and remove the protruding end of the tie.

93. Chapter 5 Commercial Cardiovascular Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY U SING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty periods set fort h below. The warranty periods commence on the invoice date of the original purchase. This warranty applies only against defects discovered within the warranty period and extends only to the original purchaser of the product. Parts repaired or replaced unde r the terms of this warranty will be warranted for the remainder of the original warranty period only. To claim under this warranty, the buyer must notify Precor or your authorized Precor dealer within 30 days after the date of discovery of any nonconformi ty and make the affected product available for inspection by Precor or its service representative. Precor’s obligations under this warranty are limited as set forth below. Warranty Periods and Coverage. All Commercial Cardiovascular Products (excluding Str etchTrainer, Strength Products, and coverage specific to certain models and options as defined below):  Frame: 7 years  Treadmill drive motor: 5 years  Items subject to wear: 1 year  All other parts (including mechanical parts and electronic parts): 2 years  La bor: 1 year 880 Line Commercial Cardiovascular Products (superseding the coverage above where applicable):  Labor on the P80 console: 2 years  High wear items on the P80 console, including headphone jack, USB connector, and iPod® connector: 90 days

66. 16 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Attaching the Seat Back and Bottle Holder While the equipment is in use, the seat back flexes to support users o f different shapes and sizes. Underneath the seat back, the bottle holder accommodates both left - handed and right - handed users. To attach the seat back: 1. Insert the lower front edge of the seat back assembly under the seat. 2. Swing the seat back assembly into place so that its four screw holes line up with the holes on the seat carriage bracket, as shown in the following illustration. Figure 2 : Moving the seat back assembly into position 3. Place four ⁵₁₆ - inch washers onto four ⁵₁₆ - inch x ³₄ - inch sockethead screws. 4. Insert the screws through the holes in the seat back assembly and thread them into the seat carriage bracket. 5. Adjust the position of the seat back, then tighten the scr ews completely using a ¹₄ - inch hex wrench.

35. Chapter 4 Starting a W orkout CAUTION: If you are using a treadmill, be sure to attach the security clip to your clothing before starting your workout. The equipment is in the Welcome state when the words PRESS GO OR PROGRAMS TO START scroll across the scrolling text display are a and the word WELCOME scrolls on the upper text display. Press Reset ( Pause/Reset on tread consoles) to display the Welcome screen. From the Welcome screen, there are two ways to begin a workout:  Press GO (Quick Start™ method). This action launches the Ma nual program. Calculations, such as calories used, are based on a 150 - lb (68 kg), 35 - year old individual. You can complete a workout using this program with default values, or you can change workout settings.  Press Programs and enter your personal data. Im portant : On self - powered equipment, the battery initializes when you begin moving. A minimum rate of motion must be maintained for the Welcome screen to appear. The words PEDAL FASTER (or the equivalent message depending on the equipment type) appear in th e display when the rate of motion drops below the minimum requirements.

45. Chapter 6 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk o f electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks. If the equipment uses an optional power adapter, disconnect the adapter. Cleaning the Console and Display The console requi res little maintenance once installed. Precor recommends that you clean the console before and after each exercise session. To remove dust and dirt from the console:  Wipe all exposed surfaces with a soft cloth that you have moistened with a solution of 30 parts of water to 1 part of Simple Green® (for more information, visit www.simplegreen.com ). Important: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and void the Precor Limited Warranty. Never pour water or spray liqui ds directly on the console or console ’ s screen.  It is important to avoid using any corrosive chemicals on the console or screen.  Always dampen the cloth and then clean the screen. Be sure to spray the cleaning liquid onto the cloth, not the console, so t hat drips do not seep into the console.  Apply the cleaner with a soft, lint - free cloth. Avoid using gritty cloths.

62. 12 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Maintenance ................................ ................................ ............ 35 Daily Cleaning ................................ ................................ ...................... 35 Daily Inspection ................................ ................................ .................. 36 Quarterly Maintenance ................................ ................................ ..... 37 Storing the Chest Strap ................................ ................................ ...... 37 Moving the Equipment ................................ ................................ ..... 38 Long - Term Sto rage ................................ ................................ ............ 38 Self - Powered Features ................................ ............................ 39 Informational Displays Prior to Shutdown ................................ .. 40 Symptoms of a Low Battery ................................ ............................ 40 Using the Optional Power Adapter ................................ ................ 41 The Optional Power Adapter Kit ................................ ..................... 41 Replacing the Battery ................................ ................................ ........ 42 Commercial Cardiovascular Equipment Limited Warranty .... 43

63. Chapter 1 Assembling the Exercise Bike Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a pe rson using the equipment). These descriptions may not match the names of certain parts in the parts list, because such parts are named relative to the back of the equipment. To prepare the exercise bike for assembly:  Open the box and assemble the component s in the sequence presented in this guide.  Assemble and operate your equipment on a hard, level surface in the area intended for use. Important : Do not grasp any plastic parts of the unit while lifting or moving the unit. The plastic parts are non - structur al covers and are not capable of supporting the weight of the unit.  Assemble the equipment according to the guidelines in this manual to ensure you do not void the Precor Limited Warranty. Important : Any damage caused during installation is not covered by the Precor Limited Warranty.  Attach all fasteners and partially tighten them. Do not fully tighten fasteners until instructed to do so. WARNING You will need assistance to assemble this unit. DO NOT attempt assembly by yourself .

25. Setting Up the Console 23 Max Resistance (Bike, AMT) Select the maximum res istance that a user can program while using the equipment. Max Workout Time Set a maximum workout time per session. Choose a time limit between 1 and 90 minutes, or select No Limit if you do not want to set a workout time limit. Default Workout Time When set to ON , the default workout time will be 30 minutes. When set to OFF , program times will be the value in the max workout time setting. Unit of Measure Select U.S. standard or metric displays. Max Speed (Treadmill) Set the maximum speed that a user can program while using the equipment. Max Incline (Treadmill) Set the maximum percent incline that a user can program while using the equipment. Resistance Range (Bike) Workout intensity can be set to the following levels:  Low (rehab)  Medium (low torque)  High (high torque)

27. Setting Up the Console 25 Equipment Value Default Value Value Range Value Change Increments All Unit of measurement U.S. All Model number Dependent on product All Time meter 0 hours All Event log 0 entries All Odometer 0 units All Cool down 5 minutes 1 - 5 minutes 1 minute All Data entry inactivity time out 30 seconds All Time count up 00:00 minutes All Time count down 30:00 minutes All Course segments Entered time/20 if less than 20 minute workout. If over 20 minute workout, segment = 1 minute Bike, AMT Resistance level 1 1 - 20 (AMT) 1 - 25 (b ike) 1 Bike Resistance range High Low Medium High Treadmill Speed 1 mph 1.6 kph .5 - 12 mph .8 - 19.3 kph 0.1 mph .1 kph

96. 46 As sembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR I MPUTED NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, FOR DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF USE, REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE EQUIPMENT, ADDITIONAL COSTS INCURRED BY BUYER (BY WAY OF CORRECTION OR OTHERWISE) OR AN Y OTHER INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM NONDELIVERY OR FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. This exclusion applies even if the above warranty fails of its essential purposes and regardless of whether such damages are sought for breach of warranty, breach of contract, negligence, or strict liability in tort or under any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Complete this portion and keep for your records. Purchased From: Example: Dealer or store name. Phone Number: Example: Dealer or store telephone number. Product/model: Example: AMT 885 or EFX 883. Serial number: The serial number is found on the shipping container. Effective 1 November 2010 P/N 36286 - 114

8. 6 Operating and Maintaining the P20 Console  Use the equipment only for its intended purpose as desc ribed in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries.  Do not operate the equipment where aerosol (spray) products are being used or where oxygen is being administered.  Do not use out doors.  Do not attempt to service the equipment yourself, except to follow the maintenance instructions in this manual.  Never drop or insert objects into any opening. Keep hands away from moving parts.  Do not set anything on the stationary handrails, handle bars, control console, or covers. Place liquids, magazines, and books in the appropriate receptacles.  Do not lean on or pull on the console at any time. CAUTION: DO NOT remove the cover, or you may risk injury due to electric shock. Read the assembly and maintenance guide before operating. There are no user - serviceable parts inside. Contact Customer Support if the equipment needs serv icing. For use with single phase AC power only. Hazardous Materials and Proper Disposal The batteries within self - powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries . If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service . Product Recycling and Disposal This equipment must be recycled or discarded according to applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the framework for the return and recycling of used equipment as applicable t hroughout the European Union. The WEEE label indicates that the product is not to be thrown away, but rather reclaimed upon end of life per this Directive.

64. 14 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Unpacking the Equipmen t The shipping container for Precision Series exercise bikes consists of the following items:  Wooden pallet  Cardboard base  Cardboard cover WARNING Do not attempt to move the equipment off of the pallet by yourself. Have at least one other person help you, and use safe lifting techniques. To unpack the bike: 1. Carefully remove all staples securing the cover to the cardboard base. 2. Lift the cover upward and set it aside. 3. Carefully remove any staples holding the cardboard shield in place in the center of the con tainer. 4. Lift the shield upward and set it aside. 5. Cut all plastic ties securing the equipment in place. 6. Remove the upright support from the container and set it down near the spot where you plan to install the equipment. 7. Remove the seat back and bottle hold er from the container and set them down with the upright support. 8. With the help of at least one other person, lift the body assembly and move it forward until its front legs can be lowered to the floor. 9. With the help of at least one other person, carefully tilt the body assembly forward until it rests on the wheels attached to the front legs. Roll it to the location where you plan to install it, then tilt it back until it rests flat on the floor.

86. 36 Assembling and Maintaining RBK 800 - Series Recumbent Exercise Bikes Alternatively, you can clean the e quipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athletixproducts.com ) CAUTION Vacuum the floor underneath the equipment frequently to prevent the accumulation of dust and dirt that can interfere with its operation. Use a soft nylon scrub brush to clean the grooves on equipment with foot pedals. : Read and follow the manufacturer ’ s instructions, particularly dilution instructions, before using any cleaner on Precor fitness equipmen t. Do not use concentrated cleaners at full strength, or acidic cleaners of any kind; such cleaners weaken the protective finish on the equipment and void the Precor Limited Warranty. Never pour water or spray liquids onto any part of the equipment. Allow the equipment to dry completely before using. Daily Inspection At least once every day, examine the equipment for the following problems:  Slipping belts  Loose fasteners  Unusual noises  Worn or frayed power cords  Any other indication that the equipment may be in need of service Important : If yo u determine that the equipment needs service, disconnect all power connections (television, Ethernet, and power) and move the equipment away from the exercise area. Place an OUT OF SERVICE sign on the equipment and make it clear to all patrons and other us ers that they must not use it. To order parts or to contact a Precor authorized service provider in your area, refer to Obtaining Service .

10. 8 Operating and Maintaining the P20 Console Operation is subject to the followin g two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING Per FCC rules, changes or modifications not expressly approv ed by the manufacturer could void the user’s authority to operate the equipment. Industry Canada This device complies with RSS - 210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following t wo conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES - 003. Cet app areil numérique de la classe A est conforme à la norme NMB - 003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications CE compliance is claimed to the following directives:  2004/108/EC EMC Directive  2006/95/EC LVD Directive  2002/95/EC RoHS Directive Directive compliance has been verified to the following standards:  EN 55022  EN 55024  EN 60335 - 1  EN 60065 (P80 and PVS)

69. Assembling the Exercise Bike 19 To install the upright support and prepare the cables for connection to the console: 1. Attach the lower ends of the following cables to the inner side of the jack panel:  Ethernet cable  Television cable (for P80 console)  Power cable (for P80 console) 2. Slide the jack panel back into its bracket in the right side cover. 3. Using a piece of tape or a plastic tie, bind together the upper ends of all cables. 4. While your assistant holds the upright support in place over the body assembly, thread the cables upward through the support. When you are finished, use a piece of tape to secure the upper connectors of the cables at the top of the support. 5. Slide the support into position so that its screw holes line up with the co rresponding holes on the body assembly, as shown in the following illustration. Note: If the support is positioned correctly, it rests on a metal tab in the upright support channel. Figure 6 : Upright support insertion Important : In the following step, be extremely careful not to trap or pinch any of the cables between the mounting screws and their seats.

79. Installing the Console 29 Completing the Console Installation (P80) Before you complete the final installation steps, double - check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed extra cable back into the neck tube. 2. Tilt the control console backward (toward yourself) until the tab on the top edge of its back plate slides along the top edge of the console mount and th e screw holes align properly. 3. Insert the four ⁵₈ - inch flat head screws through the holes in the console mount and thread them into the holes in the back plate on the console. Partially tighten the screws using a ⁵₈ - inch hex wrench. 4. Line up the two small tabs at the top of the console ’ s back cover with the slots at the top of the opening in the console case. Insert the tabs into the slots. 5. Insert the remaining tabs on the back cover with the corresponding slots on the console case. 6. Press gently on the edg es of the back cover to snap it into place. Threading the Cable Assembly (P30 and P20) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up t he back plate on the console with the console mount, you must make sure that the cable assembly passes correctly through the openings in both components. Important : Before you begin the following procedure, remove the rear cover from the control console. S et the cover and its mounting hardware aside for later use. To thread the cable assembly: 1. Make sure that as much of each cable as possible passes through the opening in the middle of the console mount on the base unit. 2. Position the console over the console mount.

6. 4 Operating and Maintaining the P20 Console  Il est conseillé de subir un examen médical complet avant d ’ entreprendre tout programme d ’ exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement.  Do not allow children, or people unfamiliar wi th the operation of this equipment, on or near it. Do not leave children unsupervised around the equipment.  Make sure all users wear proper exercise clothing and shoes for their workouts and avoid loose or dangling clothing. Users should not wear shoes wit h heels or leather soles, and they should check the soles of their shoes to remove any dirt and embedded stones. They should also tie long hair back.  Never leave the equipment unattended when it is plugged in. Unplug the equipment from its power source whe n it is not in use, before cleaning it, and before providing authorized service. Note: The optional power adapter is considered a power source for self - powered equipment.  Use the power adapter provided with the equipment. Plug the power adapter into an ap propriate, grounded power outlet as marked on the equipment.  Care should be taken when mounting or dismounting the equipment.  Read, understand, and test the emergency stop procedures before use.  Keep the power cord or optional power adapter and plug away from heated surfaces.  Route power cables so that they are not walked on, pinched, or damaged by items placed upon or against them, including the equipment itself.  Ensure the equipment has adequate ventilation. Do not place anything on top of or over the eq uipment. Do not use on a cushioned surface that could block the ventilation opening.  Assemble and operate the equipment on a solid, level surface.

19. Setting Up the Console 17 Number Part Name Details Enter key Workout key Displays preset workouts Input Up key Use to navigate user menus Input Down key Use to navigate user menus GO key Use to begin your workout Reset key ( Pause/Reset on tread consoles) Intensity indicator Displays level of resistance. This window can appear on single and dual indicator equipment. Incline indicator Displays level of incline Tr eadmill, EFX Incline Up Increases incline level Treadmill, EFX Incline Down Decreases incline level Treadmill, EFX Intensity Up key Increases resistance or speed. This key appears on single indicator equipment. Intensity Down key Decreases resistance or speed. This key appears on single indicator equipm ent. Welcome State The equipment is in the Welcome state when it is on, but not actually in use. This means that there is no exercise session, data entry, or diagnostic operation in progress. When the equipment is in the Welcome state:  WELCOME scrolls on the program display. This is referred to as the Welcome banner.  PRESS GO OR PROGRAMS TO START scrolls in the text display.  The heart rate signal is the only segment activated.  On the treadmill, the belt is not moving and the lift motor is off.

7. Important Safety Instructions 5  Proper Location for Equipment  For all equipment other than treadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either side of the equipment, and 40 inches (1 meter) away from objects behind the equipment.  For treadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either side of the treadmill, and at least 80 inches (2 meters) away from objects behind the treadmill. Important: These location standards should also be used when positioning equipment away from sources of heat, such as radiators, heat registers, and stoves. Avoid temperature extremes.  Keep equipm ent away from water and moisture. Avoid dropping anything on or spilling anything inside the equipment to prevent electric shock or damage to the electronics.  When using the treadmill, always attach the safety clip to your clothing before beginning your w orkout. Failure to use the safety clip may pose a greater risk of injury in the event of a fall.  Do not operate electrically powered equipment in damp or wet locations.  Never operate this equipment if it has a damaged cord or plug, if it is not working pro perly, or if it has been dropped, damaged, or exposed to water. Call for service immediately if any of these conditions exist.  Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the assembly and maintena nce guide. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use.  If you plan to move the equipment, obtain help and use proper lifting techniques.  Equipment Weight Restrictions: Do not use the t readmill if you weigh more than 500 pounds (225 kg). If you weigh more than 350 pounds (160 kg), do not run on the treadmill. For all other fitness equipment, the weight limit is 350 pounds (160 kg).

59. Important Safety Instructions 9 Radio Frequency Interference (RFI) This Precor exercise equipment conforms to the following national standards defining acceptable limits for radio freq uency interference (RFI). Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro tection against harmful interference in a commercial installation. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual instructions, may cause harmful interference to ra dio communications. WARNING Per FCC rules, changes or modifications not expressly approved by Precor could void the user’s authority to operate the equipment. Industry Canada This Class A digital apparatus complies with Canadian ICES - 003. Cet appareil n umérique de la classe A est conforme à la norme NMB - 003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications CE compliance is claimed to the following directives:  2004/108/EC EMC Directive  2006/95/EC LVD Directive  2002/95/ EC RoHS Directive Directive compliance has been verified to the following standards:  EN 55022  EN 55024  EN 60335 - 1  EN 60065 (P80 and PVS)

23. Setting Up the Console 21 Lower Software Displays the software version (part number) of the motor drive unit. U - Base Software Displays the software version and part number of the upper unit application software. U - Boot Software Displays the s oftware version and part number of the upper boot loader software. Usage Log Displays information about program usage including:  Programs that have been used  Number of times each program has been used  Length of time each program was used To view the usage log: 1 . From the Odometer Information menu, press Enter . 2 . Press Input Up or Input Down to navigate the list. 3 . Press Programs once to return to the menu or twice to return to the Welcome banner. Viewing the Club Settings Menu Use Club settings to customize the equipment for your club or facility and to view useful product information. These features remain hidden from club patrons and can only be accessed using special keypresses. The equipment must be in the Welcome state before you can access the Club Settings menu. To access the Welcome state, you must power the equipment. For self - powered equipment, use the optional power adapter, otherwise you will have to maintain the minimum rate of motion. For more information on self - powered equipment, refer to Activatin g the Display . The changes made in the Club Settings mode become the default settings when the display resets to the Welcome state.

21. Setting Up the Console 19 Event Log The software is able to detect a variety of events. The event log h olds a maximum of 30 events. After the log reaches 30 events, older events are erased to make room for newer ones. Note: There is a shortcut for quick access to the Event Log report. From the Welcome banner, press Reset ( Pause/Reset on tread consoles) for five seconds. If there are no events, the words STUCK KEY appear and then the console returns to the Welcome banner. Each event log entry contains the following information:  Event number  Odometer value when the event occurred  Hour meter value at the time the event occurred  Current drawn by the motor when the event occurred (treadmill only) The following table contains a list of events detectable by the software. Table 2. Event log numbers and descriptions Event Number Description o f Event 00 Upper PCA memory location event 02 RAM location event 03 EEPROM checksum event 05 Depressed key at power up 09 Lower PCA memory test event 10 Line Frequency out of acceptable range 11 Watchdog (Upper PCA) low voltage power 12 Watchdog (L ower PCA) low voltage power 13 Fan at incorrect speed (version 1 treadmills) 14 F an fail (L ower PCA) 15 AC input voltage too high 16 AC input voltage too low 20 Too many maximum power requests in one second 21 Too many maximum consecutive power reque sts

83. Installing the Console 33 Completing the Console Installation (P30 and P20) Before you co mplete the final installation steps, double - check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed extra cable back into the n eck tube. 2. Tilt the control console backward (toward yourself) until the tab on the top edge of its back plate slides along the top edge of the console mount and the screw holes align properly. 3. Insert the four ⁵₈ - inch flat head screws through the holes in the console mount and thread them into the holes in the back plate on the console. Partially tighten the screws using a ⁵₈ - inch hex wrench. 4. Line up the two small tabs at the bottom of the console ’ s back cover with the slots at the bottom of the console ca se. Insert the tabs into the slots. 5. Insert the two #8 – 32 x ¹₂ - inch Phillips - head screws that you removed earlier into the holes at the top edge of the console ’ s back cover. Tighten the screws fully. Important : Use caution not to pinch the cables between t he back cover and PVS mounting screw heads. 6. Fully tighten the four mounting screws (partially tightened in step 3) using a ⁵₃₂ - inch hex wrench. Verifying That the Heart Rate Display Is Operational To verify that the heart rate display is operational: 1. Beg in exercising on the equipment. 2. Grasp both touch - sensitive handlebars. Note: The heart rate is read within ten seconds. During that time, the heart on the display flashes. 3. Look at the HEART RATE display. After a few seconds, a number appears indicating you r heart rate. 4. If a number does not appear in the HEART RATE display, check the cable connection to make sure it is properly connected.

20. 18 Operating and Maintaining the P20 Console On self - po wered equipment, the battery initializes when you begin working out. You must maintain a minimum rate of motion for the Welcome banner to appear. PEDAL FASTER (or the equivalent message depending on the equipment type) appears in the display when the batte ry is low or when the rate of motion drops below the minimum requirements. Viewing the Odometer Informational Menu Each piece of equipment provides information about its use, as well as its software version, serial number, usage log, and event log. In mo st cases, you will only access this information if directed to do so by Precor® Customer Support. To view the odometer informational menu: 1 . Press the following keys in the order presented. Reset ( Pause/Reset on tread consoles) Input Up Enter Note: Only two seconds are allowed between keypresses. If a key is not pressed, the console display returns to the Welcome banner. 2 . Press Up or Down to navigate the menu. 3 . Press GO to select a test. 4 . Press Programs once to return to the Odometer menu or twice to return to the Welcome banner. Odometer The odometer tracks equipment usage by the number of units traveled. The Odometer Units and Values table provides information on how usage is tracked depending on the equipment type. The odometer information updates under thes e conditions:  Every 30 minutes  At the end of a course  When an event occurs If the course is terminated by turning off the power, then the odometer data for that workout is lost.

54. 4 Assembling and Maintaining RBK 800 - Series Recumbent Exercise B ikes  Use the power adapter provided with the equipmen t. Plug the power adapter into an appropriate, grounded power outlet as marked on the equipment.  Care should be taken when mounting or dismounting the equipment.  Read, understand, and test the emergency stop procedures before use.  Keep the power cord or o ptional power adapter and plug away from heated surfaces.  Route power cables so that they are not walked on, pinched, or damaged by items placed upon or against them, including the equipment itself.  Ensure the equipment has adequate ventilation. Do not pla ce anything on top of or over the equipment. Do not use on a cushioned surface that could block the ventilation opening.  Assemble and operate the equipment on a solid, level surface.  Proper Location for Equipment  For all equipment other than treadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either side of the equipment, and 40 inches (1 meter) away from objects behind the equipment.  For treadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either side of the treadmill, and at least 80 inches (2 meters) away from objects behind the treadmill.  Keep equipment away from water and moisture. Avoid dropping anything on or spilling anything inside the equipment to prevent electric shock or damage to the electronics.  Do not operate electrically powered equipment in d amp or wet locations.  Never operate this equipment if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or exposed to water. Call for service immediately if any of these conditions exist.  Maintain the equipme nt to keep it in good working condition, as described in the Maintenance section of the assembly and maintenance guide. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use.

65. Assembling the Exercise Bike 15 Hardware Kit (not to scale) Before you begin the assembly, v erify that the following hardware items are packed with the equipment. Fasteners Quantity ⁵₁₆ - inch x ³₄ - inch sockethead screw 4 ¹₄ - inch x ⁵₈ - inch flathead machine screw 4 ⁵₁₆ - inch flat washer 4 Uprig ht support mounting screw 2 Required Tools  ³₈ - inch hex wrench  ¹₄ - inch hex wrench  ⁵₃₂ - inch hex wrench  #2 Phillips screwdriver  Wire cutter

24. 22 Operating and Maintaining the P20 Console To view the Club Settings menu: 1 . Press the following keys in the order presented. Reset ( Pause/Reset on tread consoles) Ent er Input Up Enter Programs Enter Input Up Enter Note: Only two seconds are allowed between keypresses. If a key is not pressed, the console display returns to the Welcome banner. 2 . Press Up or Down to navigate the menu. 3 . Press GO to select a test. 4 . Press Prog rams once to return to the Odometer menu or twice to return to the Welcome banner. Club Setting Values Language Select the preferred language for the console display. Max Cool Down Time Select the maximum amount of time the equipment will remain in the coo l down mode. The available values are 0 to 5 minutes. Cool down time is the period of time following the completion of a program when the user exercises at a reduced work rate. Max Pause Time This setting limits how long a equipment will remain in the pau sed state during a workout before resetting. The available values are 1 to 120 seconds. Set Max CrossRamp Select the maximum height on the EFX CrossRamp. The default is 20, which is also the maximum height.

55. Important Safety Instructions 5  If you plan to move t he equipment, obtain help and use proper lifting techniques. Refer to the "Moving the Equipment" section of the assembly and maintenance guide.  Use the equipment only for its intended purpose as described in this manual. Do not use accessory attachments th at are not recommended by Precor. Such attachments may cause injuries.  Do not operate the equipment where aerosol (spray) products are being used or where oxygen is being administered.  Do not use outdoors.  Do not attempt to service the equipment yourself, except to follow the maintenance instructions in this manual.  Never drop or insert objects into any opening. Keep hands away from moving parts.  Do not set anything on the stationary handrails, handlebars, control console, or covers. Place liquids, magazine s, and books in the appropriate receptacles.  Do not lean on or pull on the console at any time. CAUTION : DO NOT remove the cover, o r you may risk injury due to electric shock. Read the assembly and maintenance guide before operating. There are no user - serviceable parts inside. Contact Customer Support if the equipment needs servicing. For use with single phase AC supply only. Educati ng Users Take time to educate users about the Important Safety Instructions found in both the User Reference Manual and Product Owner ’ s Manual . Explain to your club or facility patrons that they should observe the following precautions:  Hold onto a station ary handrail or handlebar while assuming the starting position on the equipment.  Face the console at all times.  Hold on to a stationary handrail or handlebar with one hand whenever you operate the console keys with the other hand.

58. 8 Assembling and Maintaining RBK 800 - Series Recumbent Exercise B ikes European Applications CE compliance is claimed to the following directives:  1999/5/EC R&TTE Directive  2006/95/EC LVD Directive  2002/95/EC RoHS Directive Directive compliance has been verified to the following standards:  EN 55022  EN 300 330 - 1 V1.5.1  EN 300 330 - 2 V1.3.1  EN 301 489 - 3 V1.4.1  EN 301 489 - 1 V1.8.1  EN 60950 - 1 Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this secti on applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards. Cardiovascular Type Equipment:  CAN/CSA, IEC, EN 60335 - 1 (Household and similar electrical appliances - Safety)  EN 957 (Stationary training equipment, class S/B compliant equipment) PVS and P80 Regulatory Notice This Precor equipment has been tested and found to comply with the following applicable s afety standards.  CAN/CSA, UL, IEC, EN 60065 (Audio, video and similar electronic apparatus - Safety)

39. Starting a Workout 37 Understanding Metrics Three different types of metrics are capture d during a workout. Controlled Metrics Metrics that can be set and changed are:  Resistance Level (AMT, EFX, bike)  Speed (treadmill)  Incline (treadmill)  Steps/Minute (climber) Current Performance Metrics Metrics that describe the intensity of a workout in real time are:  Calories/Minute, Calories/Hour  Heart Rate  Speed (treadmill, bike)  Revolutions/Minute (bike)  Strides/Minute (AMT, EFX) Accumulated Metrics Metrics that describe the overall performance throughout the entire exercise session are:  Time: Count - down Mode Count - up Mode  Calories  Distance: Average Strides/Minute (AMT, EFX) Average Speed (treadmill, bike) Floors (climber)

36. 34 Operating and Maintaining the P20 Console Starting a Preset Programmed Workout Preset workouts are a great way to tailor your workouts to your fitness goals, stay challenged, and add variety to your sessions. The P20 include s the following preset programs:  Manual  Interval 1 - 1  Interval 1 - 2  Weight Loss  Basic Heart Rate Control  Hill Climb  Cross Country  Random  Aerobic To begin using a program: 1 . On the Welcome screen, press Programs . 2 . Press Programs or Input Up/Input Down repeatedly to move through the program list. 3 . To begin your workout immediately, press Go when the name of the program you want appears in the text display area. To add personal data such as age or weight, press Enter . Before an exercise session begins, a three - secon d countdown appears in the upper text display. Entering Personal Data Personal data settings include your age, weight, and how long you want to work out. The equipment calculates calories burned and SmartRate targets based on your age and weight. Note: Th e interface may be slightly different based on the type of equipment.

13. Table of Contents Important Safety Instructions ................................ ................... 3 Safety Precautions ................................ ................................ ................. 3 Hazardous Materials and Proper Disposal ................................ .... 6 Product Recycling and Disposal ................................ ....................... 6 Regulatory Notices for Cardiovascular Exercise Equipment ................................ ................................ ...... 7 Electrical Recommendations: 120 V and 240 V Treadmills ................................ ...................... 9 Electrical Recommendations: All Equipment Excluding Treadmills ................................ ................................ .. 10 Obtaining Service ................................ ................................ ................ 10 Getting Started ................................ ................................ ......... 13 Activating the Console for Self - Powered Equipment ................ 13 Setting Up the Console ................................ ............................ 15 Viewing the Odom eter Informational Menu ................................ 18 Viewing the Club Settings Menu ................................ ..................... 21 Introducing Users to the P20 Console ................................ ..... 27 Using the Touch Heart Rate Feature ................................ ............. 27 Using a Chest Strap Transmitter ................................ .................... 29 Using the Treadmil l Safety Clip ................................ ...................... 29 Treadmill Auto Stop™ (Automatic Stop) Function .................... 31 Using SmartRate® ................................ ................................ ............... 32 Starting a Workout ................................ ................................ .. 33 Starting a Preset Programmed Workout ................................ ...... 33 Pausing and Restarting an Exercise Session ................................ 35 Ending a Session ................................ ................................ .................. 36 Programs ................................ ................................ .................. 39 Maintenance ................................ ................................ ............ 43 Cleaning the Console and Display ................................ ................. 43

61. Table of Contents Important Safety Instructions ................................ ................... 3 Safety Pre caution s ................................ ................................ ................. 3 Educating Users ................................ ................................ .................... 5 Hazardous Materials and Proper Disposal ................................ .... 6 Product Recycling and Disposal ................................ ....................... 6 Regulatory Notices for the RFID Module ................................ ....... 6 Regulatory Notices for Cardiovascular Exercise Equipment ................................ ................................ ...... 8 Electrical Recommendations: All Equipment Excluding Treadmills ................................ ................................ .. 10 Obtaining Service ................................ ................................ ................ 10 Obtaining Updat ed Documentation ................................ .............. 10 Assembling the Exercise Bike ................................ ................... 13 Unpacking the Equipment ................................ ................................ . 14 Hardware Kit (not to scale) ................................ .............................. 15 Required Tools ................................ ................................ ...................... 15 Attaching the Seat Back and Bottle Holder ................................ .. 16 Installing the Upright Support and Cables ................................ .... 17 Making Sure the Unit Is Stable ................................ ......................... 21 Brea king in the Equipment ................................ ................................ 21 Installing the Console ................................ .............................. 23 Threading the Cable Assembly (P80) ................................ .......... 23 Connecting Cables (P80) ................................ ................................ . 25 Completing the Console Installation (P80) ................................ 29 Threading the Cable Assembly (P 30 and P20) ......................... 29 Connecting Cables (P30) ................................ ................................ .. 31 Connecting Cables (P20) ................................ ................................ . 32 Completing the Console Installation (P30 and P20) ................ 33 Verifying That the Heart Rate Display Is Operational .............. 33

37. Starting a Workout 35 To enter personal data: 1 . On the Welcome screen, press Programs , then Enter . 2 . Press the Input keys to change the default value. 3 . Press Enter . The weight input screen displays. Press the In put keys to change the default value. 4 . Press Enter . The age input screen displays. Press the Input keys to change the default value. 5 . Press GO or Enter to begin your workout. The equipment counts down and 1, 2, 3 display on the screen. The words STARTING W ORKOUT scroll in the lower text display. Terminating Data Entry There are several ways to terminate data entry depending on the type of equipment. TIMEOUT: If a key is not pressed for more than 30 seconds, you are returned to the Welcome screen. RESET: If Reset is pressed before beginning the workout, you are returned to the Welcome screen. During a workout, press Reset once to see the Summary screen and twice to return to the Welcome screen. On the treadmill, press Pause/Reset once to pause the workout, t wice to see the Summary screen, and three times to return to the Welcome screen. GO: Press GO to begin a selected exercise program. Data entry is bypassed and default values are used. ENTER: Normally, Enter is pressed then the displayed value is accepted . If there is more data to enter, then the user is prompted for that data. If there is no more data to enter, the selected program is started using the previously entered data for workout Duration, Weight, and Age. Pausing and Restarting an Exercise Sess ion When you interrupt a workout, the equipment responds in one of two ways, depending on how it is powered.

Views

  • 71 Total Views
  • 51 Website Views
  • 20 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 4 www.fitness-trader.com
  • 1 fitness-trader.odoo.com
You can compare max 4 products.