0 item

Tomahawk S-Series Users Manual

Public Channel / Manuals

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

2. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 2 www.indoorcycling.com < Important p r e cautions page 3 < Before y ou b egin / component groups in carton page 4 < How to a s semble the Indoor Cycle page 5 - 8 < How to adjust the Indoor Cycle page 9 - 10 < Resistance a djustment pa ge 11 < How to move the Indoor Cycle page 11 < Preventive m aintenance page 1 2 - 16 < Daily maintenance page 12 < Weekly maintenance page 12 < Bi - weekly m aintenance page 1 2 - 13 < Monthly maintenance page 14 < Belt drive system, wearing parts page 15 - 16 < Maintenance Activi ty Plan & Checklists page 17 - 18 < Explosion d rawings of s tructural components page 19 - 24 < Spare p art r eference list page 25 < Limited warranty S - Series page 2 6 - 27 Technical specifications: The Tomahawk S - Series Bike is according to EN 957 a Class S product for professional and / or commercial use. Such training equipment is intended for the use in trainings areas of organizations such as f itness clubs or sport associations, where access and control is spe cially regulated by the person who has the legal responsibility. Foot print: 55 x 115 cm / 22 x 46 inch Weight of b ike: 60 KG / 130 Lbs Max saddle height: 110 cm / 43,5 inch Max handlebar height: 110 cm / 43,5 inch Max user weight: 130 KG / 287 Lbs The b ike is designed to accommodate most users from 150 to 205 cm / 59 to 81 inch b ody height TABLE OF CONTENTS The Tomahawk team thanks you for believing in our promise to provide you the best in indoor cycling and make you part of the Tomahawk Difference . USER’S MANUAL – S - SERIES Downloaded from www.Manualslib.com manuals search engine

24. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 24 www.indoorcycling.com Handlebar Pedals (combi pedal system) USER’S MANUAL – S - SERIES 02 30 02 SX 02 30 06 02 10 FMF 02 10 B 08 02 30 05 SX 08 01 40 A2 Descriptions of parts on page 25 Downloaded from www.Manualslib.com manuals search engine

26. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 26 www.indoorcycling.com CYTECH GmbH warrants that all new equipment will be free of manufacturing defects in workmanship and materials, becoming effective on the date of original installation. Parts repaired or replaced under the terms of this warranty will be warranted for the rema inder of the original warranty period only. Warranty may vary by region or country. Limited Warranty Parts are warranted to be free from defects in materials and workmanship for the duration of the warranty period as described below. 5 Year warranty: Frame construction, welding, seat and handlebar sliders and vertical stems 1 Year warranty: Brake system, a djustment k nobs, c rank a rms, d rive g ear components, belt, b ottom bracket assembly, f lywheel hub assem bly, powder c oating, D10 combi pedal, saddle, insert sleeves for saddle and h andlebar posts . Following parts are not covered under warranty and considered wear items: Pedal straps, b rake pads, p edal b inding system, t oe clips, s eat c over Limited warranty does not apply to: 1. Repairs performed on p roduct with missing, altered, or defaced serial numbers 2. Repair pick - up, delivery, or freight charges other than those specified below 3. Labor costs LIMTED WARRANTY S - SERIES LIMITED WARRANTY S - SERIES INDOOR CYCLE Downloaded from www.Manualslib.com manuals search engine

21. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 21 www.indoorcycling.com Frame USER’S MANUAL – S - SERIES Belt d rive k it 02 40 BE 02 40 B 02 10 B 08 02 10 A 02 99 02 SX 08 02 20 04 02 10 B 08 02 10 A 2008 RA S Descriptions of parts on page 25 Downloaded from www.Manualslib.com manuals search engine

23. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 23 www.indoorcycling.com Protection p lates ( s tandard component on S - Series ) Saddle support 01 21 VL3125 blk 02 21 05 SX 02 20 06 SX 08 02 20 03 02 10 FMF 02 30 06 Descriptions of parts on page 25 USER’S MANUAL – S - SERIES Downloaded from www.Manualslib.com manuals search engine

20. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 20 www.indoorcycling.com USER’S MANUAL – S - SERIES 01 40 08 ES 08 Flywheel 02 40 H L Part of 02 40 B 02 40 02 Chain guard 02 42 04 02 42 02 SX 08 02 42 01 SX 08 02 42 03 SX 08 02 99 05 02 99 03 Descriptions of parts on page 25 Downloaded from www.Manualslib.com manuals search engine

1. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 1 www.indoorcycling.com CAUTION ! Read all precautions and instructions in this manual before you begin using this equipment. Please keep this manual for future reference. Improper assembly, use or maintenance can void the warranty terms. USER’S MANUAL – S - SERIES Production Code? The production code number is found in the location shown below. Please writ e the production codes of your b ikes into the Maintenance Activity Checklists on page 16 and page 17. Production Code: ------------------ ----- ------ --------------------- QUESTIONS ? At TOMAHAWK, we are committed to providing complete customer satisfaction. If you have questions, please contact your local distributor or refer to our Web - Site www.indoorcycling.com Cytech GmbH Happurger Strasse 84 - 88 90482 Nuernberg – Germany [email protected] Tomahawk S - Series Model number 200 8 S B – Belt drive Downloaded from www.Manualslib.com manuals search engine

27. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 27 www.indoorcycling.com 1. The expressed warranty is provided according to the guidelines listed below and applies on the S - Series only while: a) proper assembly and maintenance as required in the Care and Maintenance Manual has been followed. (Important note: Improper assembly of the p roduct or improper maintenance will void the warranty terms) b) it remains in the possession of the original purchaser and proof of purchase is demonstrated, c) it has not been subject to accident, misuse, abuse, improper service or modification, and d) claims are made within the warranty period 2. If a legitimate warranty claim is determined the local p roduct distributor will deliver or ship to you any new or rebuilt replacement part or component, or, at the option of the manufacturer, replace the p roduct. Any shipment cost incurred by the commercial client for the purpose of i nspection of part by the l ocal p roduct distributor will only be reimbursed after legitimacy of the claim is established by the manufacturer. Method of shipment must b e approved in writing by local p roduct distributor prior mailing. In the case of non - legitimate claims the purchas er carries the cost of the replacement parts and the shipping. 3. This warranty does not cover damage or equipment failure caused by failure to provide required maintenance as outlined in this manual. Any failures or damage caused by unauthorized service , misuse, accident, negligence or improper assembly or installation; debris resulting from any constructi on or repair activities in the p roduct’s environment; rust or corrosion as a result of the p roduct’s location; alterations or modifications made withou t written authorization; or failure on your part to use, operate, and maintain the p roduct as set forth in this manual will void this warranty. All terms of this warranty are void if the p roduct is moved beyond the country to which it was originally sold and are then subject to the terms provided by that c ountry’s local authorized CYTECH GmbH representative. 4. CYTECH GmbH. limited w arranty service can be obtained by contacting your local p roduct distributor. You can also reach us directly for support at www.indoorcycling.com . 5. Product limited warranty is void when p roduct is installed in a country other than where sold. Your r esponsibility The purchaser is obligated to examine the goods immediately on delivery, for defects, otherwise the goods are considered approved and accepted. Retain proof of purchase; install, use, operate, and maintain the p roduct as specified in this manual; notify Cu stomer Service of any defect within 10 days after discovery of the defect; and, if instructed, return any defective part for replacement, or, if instructed, return the entire p roduct for repair. Placing a w arranty c laim Simply contact your local p roduct d istributor, provide them your name, address, and the serial number of your p roduct. A representative will assess the situation and take appropriate measures. If applicable you will be told how to get a replacement part. Exclusive w arranty CYTECH GmbH no r its distributors are responsible or liable for indirect, special, or consequential damages arising out of, or in connection with, the use or performance of the p roduct or damages with respect to any economic loss, loss of property, loss of revenues or pr ofits, loss of enjoyment or use, costs of removal or installation, or other consequential damages of whatsoever nature. Unauthorized c hanges to w arranty The terms of this limited w arranty cannot be changed, modified, or extended by anyone including local p roduct distributors without the signed acceptance by CYTECH GmbH. Country l aws This warranty gives you specific legal rights according to European regulations and you may have other rights which vary from country to country. Some countries may not allow t he exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness f or a particular purpose is limited in its scope and duration to the terms set forth herein. TERMS AND CONDITIONS OF WARRANTY LIMTED WARRANTY S - SERIES Downloaded from www.Manualslib.com manuals search engine

22. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 22 www.indoorcycling.com USER’S MANUAL – S - SERIES USER’S MANUAL – S - SERIES 02 11 E Rear s tabilizer i ncluding protection plates 02 11 02 SX 08 02 11 06 SX 08 02 11 05 B 02 11 B 02 11 E 02 11 A 02 11 0 1 SX 08 Front s tabilizer i ncluding protection plates 02 11 05 B Descriptions of parts on page 25 02 11 06 SX 08 Downloaded from www.Manualslib.com manuals search engine

19. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 19 www.indoorcycling.com SPARE PARTS USER’S MANUAL – S - SERIES Bottom bracket parts 01 40 CS 08 02 40 90 02 40 CRMO R SX 08 Part of 02 40 B 02 40 C 2RS 02 40 CMD 20 08 01 40 A2 02 40 CRMO L SX 08 Descriptions of parts on page 2 5 02 5 0 05 SX Brake p arts 02 5 0 03 A SX 02 5 0 03 B 02 5 0 06 02 5 0 04 02 5 0 01 02 5 0 02 02 5 0 A SX Downloaded from www.Manualslib.com manuals search engine

16. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 16 www.indoorcycling.com 4 5 USER’S MANUAL – S - SERIES A 4 . The brake pad will become worn as a result of repeated use. The indoor cycle should not be used if the emergency braking system is not working properly (see page 11)! Should you feel that the r esistance system’s functions are deficient, it is essential to fine - tune the r esistance system before the bike is used again! Please check the setting of the brake system as follows: First turn the resistance regulator on the brake system as far as it will go to the left (minimum braking effect). If the setting is correct, the brake pads should be flush with the flywheel and barely touching so that it is possible to cycle with a hardly noticeable amount of resistance. Next, check the brake pad for signs of wear. If the brake pad does show signs of ex cessive wear, thoroughly soak the brake pad with lubricant spray using the 2 lubrication holes ( A ), and then wipe the excess off. 6. Some parts of the indoor cycle may become loose as a result of repeated use. Check pedals, toe clips, and pedal straps, and make sure that they are properly tightened. Next, check all exposed screws, bolts, and nuts, and make sure that they are properly t ightened. Finally, check the saddle to make sure that it is not lo o se or damaged. Downloaded from www.Manualslib.com manuals search engine

9. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 9 www.indoorcycling.com Straps The indoor cycle can be adjusted for maximum comfort and exercise effectiveness. The instructions below describe one approach to adjusting the indoor cycle to ensure o ptimal user comfort and ideal body positioning; you may choose to adjust the indoor cycle differently. PEDAL STRAP ADJUSTMENT Sit on the saddle and position your feet on the pedals, with the balls of your feet directly above the spindles of the pedals (see the drawing below). Adjust the pedal straps so the toe clips (cages) are snug but not too tight. Note: In the case of a b ike being fitted with c ombi - pedals, the pedals feature toe clips on one surface and SPD cleats on the opposite surface. If desired, use the shoe cleats with cycling shoes instead of the toe clips. SADDLE HEIGHT ADJUSTMENT Sit on the saddle and slowly pedal until the right pedal is in the lowest position. Your knees should be slightly bent without a dropping of the hips. To avoid hyper extending your knees, make sure that your legs are not completely straight. HOW TO ADJUST THE INDOOR CYCLE USER’S MANUAL – S - SERIES Please do not adjust saddle height beyond the s top mark on the stem (see page 6 ) Please do not adju st handlebar height beyond the s top mark on the stem (see page 7 ) Downloaded from www.Manualslib.com manuals search engine

14. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 14 www.indoorcycling.com MONTHLY MAINTENANCE 1. To maintain the smooth function of the pop pin adjustment knobs (A) controlling the vertical handlebar a nd the saddle adjustment, the metal threads must be frequently lubricated. To ensure proper functioning of the lever handles ( B ) controlling the horizontal seat and handle bar adjustment, the metal threads m ust be fre quently lubricated . Apply a small amount of synthetic grease (white lithium grease) to the thread . 2. To maintain the easy adjustability of the r esistance system, the threads on the lower end of the brake rod should be lubricated. First, turn the r esistance knob clockwise until it stops. Next, look under the right or left side of the frame and locat e the brake rod, which has two l ock nuts on its lower end. Apply a small amount of synthetic grease (white lithium grease) to the thread s on the brake rod above the two lock nuts. Then, turn the resistance knob counter - clockwise until it stops. PREVENTIVE MAINTENANCE USER’S MANUAL – S - SERIES 1 2 A B Downloaded from www.Manualslib.com manuals search engine

8. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 8 www.indoorcycling.com 8. Reattach the front grub screw back into the h andlebar until the end of the grub s crew (E) almost touches the h andlebar p ost. Finally, s lide the h andlebar to the desired position and retighten the a djustment k nob. 7. Identify the right p edal. Carefully insert the r ight pedal into the c rank arm, turning by hand clockwise assuring that it enters horizontally aligned. Using a 15mm pe dal wrench, firmly tighten the r ight pedal clockwise into the r ight c rank a rm. Rep eat the same procedure for the l eft p edal but in a counter c lockwise motion. The manufacturer recommends the use of semi locti t e to mount the pedals and to avoid that pedals become loose while riding. 8 9 USER’S MANUAL – S - SERIES E A 8 . Make sure that all parts are properly tightened and that the brake pad is thoroughly soaked with lubricant before the indoor cycle is used. This precaution will avoid extensive wear on the brake pad. To protect the floor or carpet, place a mat under the i ndoor cycle. Downloaded from www.Manualslib.com manuals search engine

4. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 4 www.indoorcycling.com Dear customer, Congratulations fo r selecting the TOMAHAWK I ndoor C ycle. The TOMAHAWK I ndoor C ycle offers an impressive array of features designed to enhance cardiovascular fitness, tone muscles, and develop endurance. Whether users are beginners or experienced athletes, the indoor cycle offers workouts that will help use rs to reach their individual fitness goals. IMPORTANT: Read this manual carefully before assembling or using the indoor cycle . If you have questions after reading this manual, please contact your local distributor or refer to the website www.indoorcycling.com . Before reading on , please familiarize yourself with the parts that are labeled in the drawing below . BEFORE YOU BEGIN USER’S MANUAL – S - SERIES Tools needed for assembly: open end spanner: 17 /19mm, 13/15mm, A llen key: 3mm, 6mm Handle bar assembly handlebar upper part vertical handlebar stem Front stabilizer bar leveling feet transport wheels protection plates Seat post assembly a djustment knob h orizontal saddle support vertical seat stem Combi pedal t oe clip t oe strap b inding system Rear stabilizer bar leveling feet protection plates Stabilizer mounting kit 4 bolts 4 cap nuts 4 stainless steel washers 8 plastic washers 2 PVC g askets Downloaded from www.Manualslib.com manuals search engine

11. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 11 www.indoorcycling.com RESISTANCE ADJUSTMENT The preferred level of difficulty in pedalling (resistance) can be regulated in fine increments by use of the resistance knob. To increase the resistance, turn the resistance knob clockwise. To decrease the resistance, turn the knob counter clockwise. IMPORTANT: To stop the flywheel (wheel) while pedalling, pull up the red emergency handle. The flywheel should quickly come to a complete stop. Please make sure your shoes are fixed into the toe clip or in case cycling shoes are used your shoe cleat is connected to the pedal binding while riding. HOW TO MOVE THE INDOOR CYCLE Due to the weight of the indoor cycle, it is recommended that two persons move it. While one person lifts the back of the indoor cycle, the second person firmly holds the handlebar and tips the indoor cycle forwar d until it rolls on the wheels. Carefully move the indoor studio cycle to the desired location and then lower it. CAUTION: To reduce the risk of injury, use extreme caution while moving the indoor studio cycle. Do not attempt to move it over uneven surfac es and make sure a safety space of min 20 inch to the nearest equipment is redeemed. If the indoor cycle rocks on the floor after being set down, turn the levelling feet (see diagram) underneath the front or rear stabilizer until the rocking motion is eliminated. Important: Please do not unscrew the levelling feet more tha n ½ inch ! Resistance k nob Red emergency brake h andle Levelling f eet USER’S MANUAL – S - SERIES HOW TO OPERATE THE INDOOR CYCLE WARNING: The indoor cycle does not have a free moving flywheel (wheel); the pedals will continue to move together with the flywheel until the flywheel stops. Reducing speed in a controlled manner is required. To stop the flywheel immediately, pu ll up the red emergency break handle . Always pedal in a controlled manner and adjust your desired cadence according to your own abilities . Pull the red emergency handle up = emergency s top Downloaded from www.Manualslib.com manuals search engine

13. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 13 www.indoorcycling.com 2. To maintain the easy adjustability of the saddle post, the saddle post should be cleaned and lubricated. Remove the saddle post out of the frame a s descri bed on page 6. Apply a small amount of lubricant spray to a lint - free cloth, and clean the saddle post ( A ). Next, apply a small amount of lubricant spray inside of the rear frame sleeve. Then, reinsert the saddle post into the frame and adjust it to the desi red height. Next, loosen the rear adjustment knob and slide the saddle carriage as far backward as possible. Apply a small amount of lubricant spray to a lint - free cloth, and clean the top of the saddle slide ( B ). Then, slide the saddle carriage as far for ward as possible and clean the top of the saddle slide. Finally, adjust the saddle to the desired position. 3. To maintain the easy adjustability of the handlebar post, the handlebar post should be cleaned and lubricated. Remove the handlebar p ost out of the frame as described on page 7 . Apply a small amount of lubri cant spray to a lint - free cloth and clean the handlebar post ( A ). Next, apply a small amount of lubricant spray inside of the front frame sleeve. Then, reinsert the handlebar post into the frame and adjust it to the desired height. Next, loosen the front adjustment lever handle and sl ide the handlebar carriage as far backward as possible. Apply a small amount of lubricant spray to a lint - free cloth, and clean the top of the handlebar slide ( B ). Then, slide the handlebar carriage as far forward as possible and clean the top of the handl ebar slide. Finally, adjust the handlebar to the desired position. A B USER’S MANUAL – S - SERIES 2 3 A B Downloaded from www.Manualslib.com manuals search engine

12. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 12 www.indoorcycling.com Regular maintenance must be performed on the indoor cycle for optimal performance and longevity. Please read and follow all instructions below. If the indoor cycle is not maintained as described, components may wear excessively and the indoor cycle may bec ome damaged. Improper maintenance will void the warranty terms. If you have questions about maintenance, contact your local distributor or refer to www.indoorcycling.com Note: Many maintenance procedures require lubricant spray. Manufacturer recommends WD 40, Brunox or any other solvent free lubricant. DAILY MAINTENANCE 1. Make sure that the indoor cycle is level. If the indoor cycle rocks on your floor, turn the levelling feet underneath the front or rear stabilizer until the rocking motion is eliminated (see HOW TO MOVE THE INDOOR CYCLE on page 11 ). 2. After each user fin ishes exercising, the indoor cycle should be disinfected and cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the handleba rs and the saddle. Using a lint - free cloth, dry the handlebars and the saddle. Next, apply a small am ount of disinfectant to a lint - free cloth and clean the adjustment knobs and the adjustment handles. Avoid using strong detergents on the indoor cycle frame. WEEKLY MAINTENANCE 1. Apply a small amount of the lubrication spray to a lint - free cloth, and thoroughly clean the frame, the handlebar slider and seat sliders , the flywheel and the plastic parts of the indoor cycle. 2. (Picture A) For optimal performance of the r esistance system, and to minimize wear on the brake pad, the solvent free lubricant spray should be applied to the brake pad using the lubrication holes on the plastic part of the brake pad. If fuzz or lint appears on the brake pad, the brake pad has become too dry — lubricant spray should be applied more frequently. Make sure brake pad is thoroughly soaked from end to end with lubricant spray. Then, wipe the excess off. BI - WEEKLY MAINTENANCE 1. (Picture B) The indoor cycle should not be used if the e mergency b r ake system is not working properly. While sitting on the saddle and pedalling, test the brake by pulling the emergency brake handle upward. The flywheel should come to a quick and complete stop. PREVENTIVE MAINTENANCE USER’S MANUAL – S - SERIES A B Downloaded from www.Manualslib.com manuals search engine

10. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 10 www.indoorcycling.com USER’S MANUAL – S - SERIES HANDLEBAR ADJUSTMENT Begin with the top of the handlebar at relatively the same height or just slightly higher than the top of the saddle (dotted horizontal line A in the drawing below) and at a neutral fore/aft position (see dotted vertical line B in drawing below). If your knees touch the handlebars or if you experience back discomfort while pedalling for extended periods of ti me, the height of the handlebar can be adjusted. First, dismount the indoor cycle. Next, turn the front adjustment knob counter clockw ise, slide the handlebar post up or down, and then retighten the adjustment knob. B A Handlebar up - d own a djustment knob Next, the horizontal position of the handlebars should be adjusted. If the handlebars are too close to the saddle, your breathing may feel restricted; if the handlebars are too far from the saddle, you may experience back discomfort. To adjust the horizontal position of the handlebars, first dismount the indoor cycle. Check for proper handlebar position by positioning your elbow so that i t is touching the front tip of the saddle at a 90 degree angle and checking that the fi ngertip of your middle finger i s touching the handlebar at the mid - point. If it is not as described , then loosen the f ore - a ft adjustment knob and slide the handlebars forward or backward until your middle finger is touching the handlebar at the mid - point, and then retighten the handle. The handlebar offers a wide variety of han d positions for personal preferences. Changing your hand position can change the angle of your back, neck, and arms. To minimize the stress on your muscles during your workouts, cha nge your hand position frequently. Handlebar f ore – a ft ( ) a djustment knob Handlebar m id - point Downloaded from www.Manualslib.com manuals search engine

6. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 6 www.indoorcycling.com Do not over tig hten the adjustment k nob. Make sure the pin of the adjust ment knob is fully engaged and s addle p ost does not slide while riding. 4. Loos en the M8 b olt on the lower side of the aluminium saddle bracket ( A ) several turns without removing it. Next, turn the upper part of the saddle c lamp ( B ) one quarter of a turn, and set the rails of the s addle in the grooves of the l ower s addle c lamp. Then, lift the u pper s addle c lamp , turn it back to its original position, and set it on top of the rails. Finally, firmly retighten the b olt and make sure that the saddle is mounted in its most horizontal position at the middle of the rail. 3 4 M8 Bolt B USER’S MANUAL – S - SERIES Stop mark 3. Turn the rear a djustment k nob ( A ) counter clockwise and pull the adjustment knob to insert the s addle p ost ( B ) into the f rame. Next, bring the s addle p ost to the desired height, release the adjustment knob so the pin engages into the holes of the saddle post. Then turn the a djustment k nob clockwise to retighten until i t is snug. Then place the horizontal saddle support ( C ) into the slider bracket and connect it from beneath with the small adjustment knob ( D ). Please don’t adjust the height of the vertical saddle support beyond the stop mark to avoid instability. C D B A A Downloaded from www.Manualslib.com manuals search engine

7. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 7 www.indoorcycling.com 5. Orient the parts needed to mount the h andlebar. Turn the front a djustment k nob (A) counter clockwise and pull the adjustment knob to insert the vertic al h andlebar p ost (B) into the f rame. Next, bring the h andlebar p ost to the desired height, release the adjustment knob so the pin engages with the holes of the vertical stem and turn the adjustment k nob clockwise to retighten until it is snug. Please don’t adjust the height of the vertical saddle support beyond the stop mark to avoid instability . 6. Set the stop block (C) in to the indicated hole in the lower part of the h andlebar slider. Next, loosen the a djustment lever handle (D) in the h andlebar slider . 7. Remove the front grub screw (E) from the upper part of the h andlebar slider (F). Slide the h andlebar onto the h andlebar p ost until it stops. 5 6 7 USER’S MANUAL – S - SERIES Stop mark Do not over tighten the a djustment k nob. Make sure the pin of the adjustment knob is fully engaged and handlebar p ost does not slide while riding. A B C A D A E A F A Downloaded from www.Manualslib.com manuals search engine

15. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 15 www.indoorcycling.com 3 A B C D Right side USER’S MANUAL – S - SERIES Below graphics are the right side of the Bike in ridding posi tion 3a. Belt driven b ike Important: A lo o se belt will increase the risk of injury due to slipping and a highly over - tightened belt can cause damage to the ball bearings of the drive system and lead to excessive wear. Correcting the belt tension: To correct a loose belt: To adjust the belt, pull off the right and the left maintenance covers ( A ). Loosen the axle nut ( B ) on both ends of the flywheel axle two full turns. Loosen the o uter a djustment n ut ( C ) facing the head of the a llen bolt on each side of the flywheel. Then, turn both (right and left sides) of the inner a djustment n uts (D) on the inside of the flywheel bracket 1/4 of a turn at a time (upward on the R side and downward on L side) until the belt is properly adjusted and does not slip. Make sure to turn both adjustment screws exactly the same amount to avoid misalignment of the flywheel. Finally, retighten the two o uter a djustment n uts (C) and the two axle nuts (B), and reattach th e maintenance covers. To avoid damage to the flywheel bearings, do not over tighten the axle nuts (B). Unusual noises, roughness or vibrations are indications that the belt has been over tightened, the f lywheel or bottom bracket bearings are damaged or th at the flywheel is at an angle. 3b. U ser safety To ensure user safety, frequently check if belt is firmly tighten ed and does not slip while riding under resistance load. In case that the belt slips, proceed using the same technique as described above. Please note that a belt drive gear never shows slack but will slip if not properly tightened. In case of a misalignment , the belt will show extensive wear . Please check the wear on the belt every 3 month of use and replace if necessary. Please avoid that lubrication fluid gets in contact with the belt, the drive gear pulleys or any component of the belt drive system since this will highly increase the risk of slipping. Downloaded from www.Manualslib.com manuals search engine

5. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 5 www.indoorcycling.com Due to the weight of the indoor cycle, it is recommended that two persons perform the assembly. Set the cycle in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. 1. Identify the r ear stabilizer. Orient the r ear s tabili zer so the widest parts of the s tabilizer e nd caps ( A ) are at the rear. While a second person lifts the rear of the f rame , attach the rear stabilizer to the frame wit h two M10 x 60mm b olts ( B ), four M10 w ashers, a stabilizer g asket ( C ), two plastic w ashers ( D ), and two M10 cap n uts as shown . 2. Orient the f ront s tabilizer so the widest parts of the s tabilizer e nd caps ( A ) are at the front. While a second person lifts the front of the frame, attach the front s tabilizer to the frame with two M10 x 60mm b olts ( B ), four M10 washers, a stabilizer g asket ( C ), two plastic w ashers ( D ) , and two M10 c ap n uts . It is important that t he plastic washers (D) and PVC g asket (C) used on front and rear stabilisers are mounted in the correct manner and used to prevent direct contact of metal surfaces HOW TO ASSEMBLE THE INDOOR CYCLE USER’S MANUAL – S - SERIES To avoid damaging the r ear s tabi lizer, do not over tighten the c ap n uts. To avoid damaging the f ront s tabilizer, do not over tighten the c ap n uts. 1 2 D C A B D C A B Downloaded from www.Manualslib.com manuals search engine

3. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 3 www.indoorcycling.com 1. It is the sole responsibility of the owner to ensure that all users of the indoor cycle are informed of all warnings and precautions by a n authorized trainer or instructor prior to use . 2. Operate and maintain the indoor cycle o nly as described in this manual and after proper assembly and functionality c heck (see page 5 - 10 ) . 3 . Keep the indoor cycle indoors, away from moisture and dust. D o not place the indoor cycle in a garage or covered patio or near water. 5. Place the indoor cycle on a level surface. To protect the floor or carpet from damage, place a mat beneath the indoor cycle. Make sure that there is adequate room around the indoo r cycle to mount, dismount, and operate it. 6. Regularly inspect and properly tighten all parts of the indoor cycle as recommended in this manual. Please replace defective parts immediately and do not use the b ike until repair is performed. Only use original parts from the manufacturer 7. Children under the age of 18 should only be allowed use of the indoor cycle with parental approval and if guided by a specially trained instructor. 8. The indoor cycle should not be used by persons weighing more than 290 lbs/130 kg. 9. Always wear appropriate athletic clothes and shoes while operating the indoor cycle. Do not wear loose clothes that could become caught on the indoor cycle or shoes with loose laces. 10. Before using the indoor cycle, make su re that you are familiar with the setup/operation of the indoor cycle (see pages 9 - 12 ). 11. The indoor cycle does not have a n independently moving flywheel (wheel); the pedals will continue to move together with the flywheel until the flywheel stops . 12. Always regulate the flywheel resistance so that your pedalling motion is controlled (see page 9 - 12 ). 13. Keep your back straight while using the indoor cycle; do not arch your back. 14. If you feel pain or dizziness while exercising, stop immediately, rest and cool down and consult a physician. 15 . If replacement parts are needed, use only manufacturer supplied parts. WARNING ! To reduce the risk of serious injury, read the following important precautions and information before operating the indoor cycle. USER’S MANUAL – S - SERIES IMPORTANT PRECAUTIONS WARNING : Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre - existing health problems. Read all instructions before using. Be aware that incorrect or extensive training may result in serious health injuries. The manufacturer assumes no respon sibility for personal injury or property damage sustained by or through the use of this product . Downloaded from www.Manualslib.com manuals search engine

17. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 17 www.indoorcycling.com Activity Details found on page... Daily Weekly Bi - weekly Monthly Feet leveling, disinfection and cleaning of the bike 11, 12 X Servicing brake pads, detailed cleaning of the entire bike 11,1 6 X Check emergency brake function 11 , 16 X Clean and lubricate saddle and handlebar sliders / posts 1 3 X Check adjustment knobs 1 4 X Check brake system, lubricate 1 4 - 15 X Check belt drive system 15 X Check brake pad for signs of wear 1 6 X Check pedals, toe clip and straps for signs of wear 1 6 X Check all connections and fixings if they are secure and correctly tighten 1 6 X Examples of m aintenance p lan charts for in - house service technicians: (Examples of weekly / b i - weekly / m onthly maintenance ) Weekly Maintenance Checklist Bike No. Production code b ike Observations Action t aken Result Name / date 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Maintenance Activity Plan & Checklists USER’S MANUAL – S - SERIES Downloaded from www.Manualslib.com manuals search engine

25. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 25 www.indoorcycling.com Article No. De scription Article No. De scription Drive g ear Frame parts 02 40 BE Belt PL 1397/550 L 2008 RA SX S - Series m ain frame 02 40 B B elt drive assembly set 02 10 A Vertical i nsert sleeve 02 40 90 P ulley mounting bolts 02 20 04 Rubber bumper - h andlebar 02 40 CRMO R SX 08 Crank - right side, platinum 02 10 B 08 Pop pin adjustment knob 02 40 CRMO L SX 08 Crank - left side, platinum Front & rear s tabilizer 02 40 C S 08 Crank bolt M8x20x1. 02 11 02 SX 08 Rear s tabilizer , platinum, protection plates 02 40 CMD20 08 MD20 BB spindle 02 11 06 SX 08 Flush e ndcap , carbon look 02 40 C 2 RS Ball b earing SKF 6004Z 02 11 05 B Rubber feet Brake system 02 11 01 SX 08 Front s tabilizer, platinum, protection plates , transport wheels 02 50 A SX Brake adjustment knob 02 11 B Stabilizer mounting Kit 02 50 0 1 Emergency brake handle 02 11 E Rubber g asket 02 50 03 A SX Complete upper brake rod 02 11 A Transport w heel 02 50 04 Brake pad Saddle assembly 02 50 02 Adjustment ball 0121VL3135 blk Tomahawk s addle bl ack 02 50 05 SX Lower brake system 02 20 03 Aluminium s addle bracket 02 50 03 B Brake adjustment drum 02 21 05 SX Horizontal s addle support 02 50 06 SX Bell crank, retainer for brake pad 02 30 06 Stop block and grub screws for horizontal saddle support Flywheel 02 2 2 06 SX 08 Vertical s addle support 02 40 H Flywheel axle 02 10 FMF Lever adjustment handle 02 40 02 Chain tensioner 02 40 H L Ball b earing 6001Z 02 40 08 ES 08 S - Series f lywheel Handlebar Chain guard 02 30 02 Sx Handlebar with upper slider 02 42 02 SX 08 O uter chain guard, carbon look 02 30 05 SX 08 Vertical handlebar stem 02 42 04 Rubber pop out cover Pedals 02 42 01 SX 08 I nner chain guard, carbon look 01 40 A 2 Combi pedal with t oe clip and t oe strap 02 43 03 SX 08 Left side cover, carbon look 02 99 03 Plastic washer with mounting bolts M4x15 02 99 02 SX 08 Bottle cage SPARE PARTS LIST USER’S MANUAL – S - SERIES Downloaded from www.Manualslib.com manuals search engine

18. Version 1.3 Copyright by CYTECH GmbH 2008 ENG 18 www.indoorcycling.com Bi - Weekly Maintenance Checklist Bike No. Production code b ike Observations Action t aken Result Name / date 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Monthly Maintenance Checklist Bike No. Production code b ike Observations Action t aken Result Name / date 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 MAINTENANCE CHECKLISTS USER’S MANUAL – S - SERIES Downloaded from www.Manualslib.com manuals search engine

Views

  • 111 Total Views
  • 65 Website Views
  • 46 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 4

  • 11 www.fitness-trader.com
  • 1 fitness-trader.odoo.com
  • 1 www.google.es
  • 2 www.google.com
You can compare max 4 products.